01.02.2019 16:28, Thierry Reding пишет:
> From: Thierry Reding <treding@xxxxxxxxxx>
>
> The host1x CDMA push buffer is terminated by a special opcode (RESTART)
> that tells the CDMA to wrap around to the beginning of the push buffer.
> To accomodate the RESTART opcode, an extra 4 bytes are allocated on top
> of the 512 * 8 = 4096 bytes needed for the 512 slots (1 slot = 2 words)
> that are used for other commands passed to CDMA. This requires that two
> memory pages are allocated, but most of the second page (4092 bytes) is
> never used.
>
> Decrease the number of slots to 511 so that the RESTART opcode fits
> within the page. Adjust the push buffer wraparound code to take into
> account push buffer sizes that are not a power of two.
>
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> drivers/gpu/host1x/cdma.c | 29 +++++++++++++++++++++++++----
> 1 file changed, 25 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/host1x/cdma.c b/drivers/gpu/host1x/cdma.c
> index a96c4dd1e449..50c1370b56c7 100644
> --- a/drivers/gpu/host1x/cdma.c
> +++ b/drivers/gpu/host1x/cdma.c
> @@ -42,7 +42,17 @@
> * means that the push buffer is full, not empty.
> */
>
> -#define HOST1X_PUSHBUFFER_SLOTS 512
> +/*
> + * Typically the commands written into the push buffer are a pair of words. We
> + * use slots to represent each of these pairs and to simplify things. Note the
> + * strange number of slots allocated here. 512 slots will fit exactly within a
> + * single memory page. We also need one additional word at the end of the push
> + * buffer for the RESTART opcode that will instruct the CDMA to jump back to
> + * the beginning of the push buffer. With 512 slots, this means that we'll use
> + * 2 memory pages and waste 4092 bytes of the second page that will never be
> + * used.
> + */
> +#define HOST1X_PUSHBUFFER_SLOTS 511
>
> /*
> * Clean up push buffer resources
> @@ -148,7 +158,10 @@ static void host1x_pushbuffer_push(struct push_buffer *pb, u32 op1, u32 op2)
> WARN_ON(pb->pos == pb->fence);
> *(p++) = op1;
> *(p++) = op2;
> - pb->pos = (pb->pos + 8) & (pb->size - 1);
> + pb->pos += 8;
> +
> + if (pb->pos >= pb->size)
> + pb->pos -= pb->size;
> }
>
> /*
> @@ -158,7 +171,10 @@ static void host1x_pushbuffer_push(struct push_buffer *pb, u32 op1, u32 op2)
> static void host1x_pushbuffer_pop(struct push_buffer *pb, unsigned int slots)
> {
> /* Advance the next write position */
> - pb->fence = (pb->fence + slots * 8) & (pb->size - 1);
> + pb->fence += slots * 8;
> +
> + if (pb->fence >= pb->size)
> + pb->fence -= pb->size;
> }
>
> /*
> @@ -166,7 +182,12 @@ static void host1x_pushbuffer_pop(struct push_buffer *pb, unsigned int slots)
> */
> static u32 host1x_pushbuffer_space(struct push_buffer *pb)
> {
> - return ((pb->fence - pb->pos) & (pb->size - 1)) / 8;
> + unsigned int fence = pb->fence;
> +
> + if (pb->fence < pb->pos)
> + fence += pb->size;
> +
> + return (fence - pb->pos) / 8;
> }
>
> /*
>
Reviewed-by: Dmitry Osipenko <digetx@xxxxxxxxx>
Tested-by: Dmitry Osipenko <digetx@xxxxxxxxx>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
