Current driver is calculating hbp maximum value by subtracting
hsync_start with hdisplay which is front porch value, but the
hbp refers to back porch.
Back porch value is calculating by subtracting htotal with
hsync_end as per drm_mode timings, and BSP code from BPI-M64-bsp
is eventually following the same.
BPI-M64-bsp is computing hbp as
(in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
dsi_hbp = (hbp-hspw)*dsi_pixel_bits[format]/8 - (4+2);
=> (panel->lcd_hbp - timmings->hor_sync_time)
=> (timmings->hor_back_porch + timmings->hor_sync_time -
timmings->hor_sync_time)
=> timmings->hor_back_porch
=> mode->htotal - mode->hsync_end
So, update the MIPI-DSI hbp value accordingly.
Tested on 2-lane, 4-lane DSI LCD panels.
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
Tested-by: Merlijn Wajer <merlijn@xxxxxxxxxx>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 09569938c20d..780b1906c661 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -579,7 +579,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
*/
#define HBP_PACKET_OVERHEAD 6
hbp = max((unsigned int)HBP_PACKET_OVERHEAD,
- (mode->hsync_start - mode->hdisplay) * Bpp - HBP_PACKET_OVERHEAD);
+ (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD);
/*
* The frontporch is set using a blanking packet (4 bytes +
--
2.18.0.321.gffc6fa0e3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
