Introduce use of DRM_DEV* for logging.
This makes logging in the drm subsystem more consistent.
Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
Cc: David Airlie <airlied@xxxxxxxx>
Cc: Daniel Vetter <daniel@xxxxxxxx>
---
drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index 5bacf3f2da05..e7920ae018bd 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -431,14 +431,14 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
- dev_err(dev, "cannot get reset-gpio\n");
+ DRM_DEV_ERROR(dev, "cannot get reset-gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
ctx->supply = devm_regulator_get(dev, "power");
if (IS_ERR(ctx->supply)) {
ret = PTR_ERR(ctx->supply);
- dev_err(dev, "failed to request regulator: %d\n", ret);
+ DRM_DEV_ERROR(dev, "failed to request regulator: %d\n", ret);
return ret;
}
@@ -461,7 +461,7 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
NULL);
if (IS_ERR(ctx->bl_dev)) {
ret = PTR_ERR(ctx->bl_dev);
- dev_err(dev, "failed to register backlight: %d\n", ret);
+ DRM_DEV_ERROR(dev, "failed to register backlight: %d\n", ret);
return ret;
}
@@ -474,7 +474,7 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
- dev_err(dev, "mipi_dsi_attach failed. Is host ready?\n");
+ DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?\n");
drm_panel_remove(&ctx->panel);
backlight_device_unregister(ctx->bl_dev);
return ret;
--
2.12.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
