Introduce use of DRM_DEV* for logging. This makes logging in the drm subsystem more consistent. Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Cc: Thierry Reding <thierry.reding@xxxxxxxxx> Cc: David Airlie <airlied@xxxxxxxx> Cc: Daniel Vetter <daniel@xxxxxxxx> --- drivers/gpu/drm/panel/panel-samsung-ld9040.c | 12 +++++------ drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 15 +++++++------- drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 8 ++++---- drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c | 26 +++++++++++++----------- 4 files changed, 32 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-samsung-ld9040.c b/drivers/gpu/drm/panel/panel-samsung-ld9040.c index 7d27b79d0b2a..fec639c19d74 100644 --- a/drivers/gpu/drm/panel/panel-samsung-ld9040.c +++ b/drivers/gpu/drm/panel/panel-samsung-ld9040.c @@ -149,7 +149,7 @@ static void ld9040_dcs_write(struct ld9040 *ctx, const u8 *data, size_t len) if (ctx->error < 0 || len == 0) return; - dev_dbg(ctx->dev, "writing dcs seq: %*ph\n", (int)len, data); + DRM_DEV_DEBUG(ctx->dev, "writing dcs seq: %*ph\n", (int)len, data); ret = ld9040_spi_write_word(ctx, *data); while (!ret && --len) { @@ -158,8 +158,8 @@ static void ld9040_dcs_write(struct ld9040 *ctx, const u8 *data, size_t len) } if (ret) { - dev_err(ctx->dev, "error %d writing dcs seq: %*ph\n", ret, - (int)len, data); + DRM_DEV_ERROR(ctx->dev, "error %d writing dcs seq: %*ph\n", + ret, (int)len, data); ctx->error = ret; } @@ -342,15 +342,15 @@ static int ld9040_probe(struct spi_device *spi) ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(ctx->reset_gpio)) { - dev_err(dev, "cannot get reset-gpios %ld\n", - PTR_ERR(ctx->reset_gpio)); + DRM_DEV_ERROR(dev, "cannot get reset-gpios %ld\n", + PTR_ERR(ctx->reset_gpio)); return PTR_ERR(ctx->reset_gpio); } spi->bits_per_word = 9; ret = spi_setup(spi); if (ret < 0) { - dev_err(dev, "spi setup failed.\n"); + DRM_DEV_ERROR(dev, "spi setup failed.\n"); return ret; } diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c index 813afee82ec9..e2f2ee252409 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c @@ -458,7 +458,8 @@ static int s6e3ha2_set_brightness(struct backlight_device *bl_dev) if (brightness < S6E3HA2_MIN_BRIGHTNESS || brightness > bl_dev->props.max_brightness) { - dev_err(ctx->dev, "Invalid brightness: %u\n", brightness); + DRM_DEV_ERROR(ctx->dev, "Invalid brightness: %u\n", + brightness); return -EINVAL; } @@ -706,28 +707,28 @@ static int s6e3ha2_probe(struct mipi_dsi_device *dsi) ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), ctx->supplies); if (ret < 0) { - dev_err(dev, "failed to get regulators: %d\n", ret); + DRM_DEV_ERROR(dev, "failed to get regulators: %d\n", ret); return ret; } ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(ctx->reset_gpio)) { - dev_err(dev, "cannot get reset-gpios %ld\n", - PTR_ERR(ctx->reset_gpio)); + DRM_DEV_ERROR(dev, "cannot get reset-gpios %ld\n", + PTR_ERR(ctx->reset_gpio)); return PTR_ERR(ctx->reset_gpio); } ctx->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH); if (IS_ERR(ctx->enable_gpio)) { - dev_err(dev, "cannot get enable-gpios %ld\n", - PTR_ERR(ctx->enable_gpio)); + DRM_DEV_ERROR(dev, "cannot get enable-gpios %ld\n", + PTR_ERR(ctx->enable_gpio)); return PTR_ERR(ctx->enable_gpio); } ctx->bl_dev = backlight_device_register("s6e3ha2", dev, ctx, &s6e3ha2_bl_ops, NULL); if (IS_ERR(ctx->bl_dev)) { - dev_err(dev, "failed to register backlight device\n"); + DRM_DEV_ERROR(dev, "failed to register backlight device\n"); return PTR_ERR(ctx->bl_dev); } diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c index f1c8000e0386..dd50f4089923 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c @@ -458,14 +458,14 @@ static int s6e63j0x03_probe(struct mipi_dsi_device *dsi) ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), ctx->supplies); if (ret < 0) { - dev_err(dev, "failed to get regulators: %d\n", ret); + DRM_DEV_ERROR(dev, "failed to get regulators: %d\n", ret); return ret; } ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(ctx->reset_gpio)) { - dev_err(dev, "cannot get reset-gpio: %ld\n", - PTR_ERR(ctx->reset_gpio)); + DRM_DEV_ERROR(dev, "cannot get reset-gpio: %ld\n", + PTR_ERR(ctx->reset_gpio)); return PTR_ERR(ctx->reset_gpio); } @@ -476,7 +476,7 @@ static int s6e63j0x03_probe(struct mipi_dsi_device *dsi) ctx->bl_dev = backlight_device_register("s6e63j0x03", dev, ctx, &s6e63j0x03_bl_ops, NULL); if (IS_ERR(ctx->bl_dev)) { - dev_err(dev, "failed to register backlight device\n"); + DRM_DEV_ERROR(dev, "failed to register backlight device\n"); return PTR_ERR(ctx->bl_dev); } diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c index b252d23f386f..e3e0766c3a17 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c @@ -147,8 +147,8 @@ static void s6e8aa0_dcs_write(struct s6e8aa0 *ctx, const void *data, size_t len) ret = mipi_dsi_dcs_write_buffer(dsi, data, len); if (ret < 0) { - dev_err(ctx->dev, "error %zd writing dcs seq: %*ph\n", ret, - (int)len, data); + DRM_DEV_ERROR(ctx->dev, "error %zd writing dcs seq: %*ph\n", + ret, (int)len, data); ctx->error = ret; } } @@ -163,7 +163,8 @@ static int s6e8aa0_dcs_read(struct s6e8aa0 *ctx, u8 cmd, void *data, size_t len) ret = mipi_dsi_dcs_read(dsi, cmd, data, len); if (ret < 0) { - dev_err(ctx->dev, "error %d reading dcs seq(%#x)\n", ret, cmd); + DRM_DEV_ERROR(ctx->dev, "error %d reading dcs seq(%#x)\n", + ret, cmd); ctx->error = ret; } @@ -814,9 +815,9 @@ static void s6e8aa0_set_maximum_return_packet_size(struct s6e8aa0 *ctx, ret = mipi_dsi_set_maximum_return_packet_size(dsi, size); if (ret < 0) { - dev_err(ctx->dev, - "error %d setting maximum return packet size to %d\n", - ret, size); + DRM_DEV_ERROR(ctx->dev, + "error %d setting maximum return packet size to %d\n", + ret, size); ctx->error = ret; } } @@ -825,22 +826,23 @@ static void s6e8aa0_read_mtp_id(struct s6e8aa0 *ctx) { u8 id[3]; int ret, i; + struct device *dev = ctx->dev; ret = s6e8aa0_dcs_read(ctx, 0xd1, id, ARRAY_SIZE(id)); if (ret < 0 || ret < ARRAY_SIZE(id) || id[0] == 0x00) { - dev_err(ctx->dev, "read id failed\n"); + DRM_DEV_ERROR(dev, "read id failed\n"); ctx->error = -EIO; return; } - dev_info(ctx->dev, "ID: 0x%2x, 0x%2x, 0x%2x\n", id[0], id[1], id[2]); + DRM_DEV_INFO(dev, "ID: 0x%2x, 0x%2x, 0x%2x\n", id[0], id[1], id[2]); for (i = 0; i < ARRAY_SIZE(s6e8aa0_variants); ++i) { if (id[1] == s6e8aa0_variants[i].version) break; } if (i >= ARRAY_SIZE(s6e8aa0_variants)) { - dev_err(ctx->dev, "unsupported display version %d\n", id[1]); + DRM_DEV_ERROR(dev, "unsupported display version %d\n", id[1]); ctx->error = -EINVAL; return; } @@ -1007,14 +1009,14 @@ static int s6e8aa0_probe(struct mipi_dsi_device *dsi) ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), ctx->supplies); if (ret < 0) { - dev_err(dev, "failed to get regulators: %d\n", ret); + DRM_DEV_ERROR(dev, "failed to get regulators: %d\n", ret); return ret; } ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(ctx->reset_gpio)) { - dev_err(dev, "cannot get reset-gpios %ld\n", - PTR_ERR(ctx->reset_gpio)); + DRM_DEV_ERROR(dev, "cannot get reset-gpios %ld\n", + PTR_ERR(ctx->reset_gpio)); return PTR_ERR(ctx->reset_gpio); } -- 2.12.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel