Requests for the verification of AKE_Send_H_prime.
ME will calculate the H and comparing it with received H_Prime.
The result will be returned as status.
Here AKE_Send_H_prime is a HDCP2.2 Authentication msg.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Styles and typos fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc Addition [Tomas]
memcpy for const length.
Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
Reviewed-by: Uma Shankar <uma.shankar@xxxxxxxxx>
---
drivers/misc/mei/hdcp/mei_hdcp.c | 57 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 56 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c
index 24665fff640d..74219e1487d3 100644
--- a/drivers/misc/mei/hdcp/mei_hdcp.c
+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
@@ -169,12 +169,67 @@ mei_verify_receiver_cert_prepare_km(struct device *dev,
return 0;
}
+/**
+ * mei_verify_hprime() - Verify AKE_Send_H_prime at ME FW.
+ * @dev: device corresponding to the mei_cl_device
+ * @hdcp_data: Intel HW specific hdcp data
+ * @rx_hprime: AKE_Send_H_prime msg for ME FW verification
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int mei_verify_hprime(struct device *dev, struct hdcp_port_data *data,
+ struct hdcp2_ake_send_hprime *rx_hprime)
+{
+ struct wired_cmd_ake_send_hprime_in send_hprime_in = { { 0 } };
+ struct wired_cmd_ake_send_hprime_out send_hprime_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !rx_hprime)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ send_hprime_in.header.api_version = HDCP_API_VERSION;
+ send_hprime_in.header.command_id = WIRED_AKE_SEND_HPRIME;
+ send_hprime_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ send_hprime_in.header.buffer_len = WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN;
+
+ send_hprime_in.port.integrated_port_type = data->port_type;
+ send_hprime_in.port.physical_port = (u8)GET_MEI_DDI_INDEX(data->port);
+
+ memcpy(send_hprime_in.h_prime, rx_hprime->h_prime,
+ HDCP_2_2_H_PRIME_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&send_hprime_in,
+ sizeof(send_hprime_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&send_hprime_out,
+ sizeof(send_hprime_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (send_hprime_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+ WIRED_AKE_SEND_HPRIME, send_hprime_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
static __attribute__((unused))
struct i915_hdcp_component_ops mei_hdcp_ops = {
.owner = THIS_MODULE,
.initiate_hdcp2_session = mei_initiate_hdcp2_session,
.verify_receiver_cert_prepare_km = mei_verify_receiver_cert_prepare_km,
- .verify_hprime = NULL,
+ .verify_hprime = mei_verify_hprime,
.store_pairing_info = NULL,
.initiate_locality_check = NULL,
.verify_lprime = NULL,
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
