Re: [v8 2/2] drm/i915: Attach colorspace property and enable modeset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 29, 2019 at 03:57:29PM +0000, Shankar, Uma wrote:
> 
> 
> >-----Original Message-----
> >From: dri-devel [mailto:dri-devel-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of
> >Ville Syrjälä
> >Sent: Tuesday, January 29, 2019 9:14 PM
> >To: Shankar, Uma <uma.shankar@xxxxxxxxx>
> >Cc: emil.l.velikov@xxxxxxxxx; intel-gfx@xxxxxxxxxxxxxxxxxxxxx; Syrjala, Ville
> ><ville.syrjala@xxxxxxxxx>; Lankhorst, Maarten <maarten.lankhorst@xxxxxxxxx>;
> >dri-devel@xxxxxxxxxxxxxxxxxxxxx
> >Subject: Re: [v8 2/2] drm/i915: Attach colorspace property and enable modeset
> >
> >On Tue, Jan 29, 2019 at 09:22:56PM +0530, Uma Shankar wrote:
> >> This patch attaches the colorspace connector property to the hdmi
> >> connector. Based on colorspace change, modeset will be triggered to
> >> switch to new colorspace.
> >>
> >> Based on colorspace property value create an infoframe with
> >> appropriate colorspace. This can be used to send an infoframe packet
> >> with proper colorspace value set which will help to enable wider color
> >> gamut like BT2020 on sink.
> >>
> >> This patch attaches and enables HDMI colorspace, DP will be taken care
> >> separately.
> >>
> >> v2: Merged the changes of creating infoframe as well to this patch as
> >> per Maarten's suggestion.
> >>
> >> v3: Addressed review comments from Shashank. Separated HDMI and DP
> >> colorspaces as suggested by Ville and Maarten.
> >>
> >> v4: Addressed Chris and Ville's review comments, and created a common
> >> colorspace property for DP and HDMI, filtered the list based on the
> >> colorspaces supported by the respective protocol standard. Handle the
> >> default case properly.
> >>
> >> v5: Added Platform specific colorspace enums and called the property
> >> creation helper using the same.
> >>
> >> v6: Addressed Shashank's review comments.
> >>
> >> v7: Rebase
> >>
> >> v8: Addressed Maarten's review comments.
> >>
> >> Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
> >> Reviewed-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
> >> ---
> >>  drivers/gpu/drm/i915/intel_atomic.c    |  1 +
> >>  drivers/gpu/drm/i915/intel_connector.c | 63
> >++++++++++++++++++++++++++++++++++
> >>  drivers/gpu/drm/i915/intel_drv.h       |  1 +
> >>  drivers/gpu/drm/i915/intel_hdmi.c      | 24 +++++++++++++
> >>  4 files changed, 89 insertions(+)
> >>
> >> diff --git a/drivers/gpu/drm/i915/intel_atomic.c
> >> b/drivers/gpu/drm/i915/intel_atomic.c
> >> index 16263ad..76b7114 100644
> >> --- a/drivers/gpu/drm/i915/intel_atomic.c
> >> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> >> @@ -124,6 +124,7 @@ int intel_digital_connector_atomic_check(struct
> >drm_connector *conn,
> >>  	 */
> >>  	if (new_conn_state->force_audio != old_conn_state->force_audio ||
> >>  	    new_conn_state->broadcast_rgb != old_conn_state->broadcast_rgb
> >> ||
> >> +	    new_state->colorspace != old_state->colorspace ||
> >>  	    new_conn_state->base.picture_aspect_ratio != old_conn_state-
> >>base.picture_aspect_ratio ||
> >>  	    new_conn_state->base.content_type != old_conn_state-
> >>base.content_type ||
> >>  	    new_conn_state->base.scaling_mode !=
> >> old_conn_state->base.scaling_mode)
> >> diff --git a/drivers/gpu/drm/i915/intel_connector.c
> >> b/drivers/gpu/drm/i915/intel_connector.c
> >> index ee16758..9a12d5e 100644
> >> --- a/drivers/gpu/drm/i915/intel_connector.c
> >> +++ b/drivers/gpu/drm/i915/intel_connector.c
> >> @@ -30,6 +30,48 @@
> >>  #include "intel_drv.h"
> >>  #include "i915_drv.h"
> >>
> >> +static const struct drm_prop_enum_list gen10_hdmi_colorspaces[] = {
> >> +	/* For Default case, driver will set the colorspace */
> >> +	{ DRM_MODE_COLORIMETRY_DEFAULT, "Default" },
> >> +	/* Standard Definition Colorimetry based on CEA 861 */
> >> +	{ DRM_MODE_COLORIMETRY_ITU_601, "ITU_601" },
> >> +	{ DRM_MODE_COLORIMETRY_ITU_709, "ITU_709" },
> >> +	/* Standard Definition Colorimetry based on IEC 61966-2-4 */
> >> +	{ DRM_MODE_COLORIMETRY_XV_YCC_601, "XV_YCC_601" },
> >> +	/* High Definition Colorimetry based on IEC 61966-2-4 */
> >> +	{ DRM_MODE_COLORIMETRY_XV_YCC_709, "XV_YCC_709" },
> >> +	/* Colorimetry based on IEC 61966-2-1/Amendment 1 */
> >> +	{ DRM_MODE_COLORIMETRY_S_YCC_601, "S_YCC_601" },
> >> +	/* Colorimetry based on IEC 61966-2-5 [33] */
> >> +	{ DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" },
> >> +	/* Colorimetry based on IEC 61966-2-5 */
> >> +	{ DRM_MODE_COLORIMETRY_OPRGB, "opRGB" },
> >> +	/* Colorimetry based on ITU-R BT.2020 */
> >> +	{ DRM_MODE_COLORIMETRY_BT2020_RGB, "BT2020_RGB" },
> >> +	/* Colorimetry based on ITU-R BT.2020 */
> >> +	{ DRM_MODE_COLORIMETRY_BT2020_YCC, "BT2020_YCC" },
> >> +	/* Colorimetry based on ITU-R BT.2020 */
> >> +	{ DRM_MODE_COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" }, };
> >> +
> >> +static const struct drm_prop_enum_list legacy_hdmi_colorspaces[] = {
> >> +	/* For Default case, driver will set the colorspace */
> >> +	{ DRM_MODE_COLORIMETRY_DEFAULT, "Default" },
> >> +	/* Standard Definition Colorimetry based on CEA 861 */
> >> +	{ DRM_MODE_COLORIMETRY_ITU_601, "ITU_601" },
> >> +	{ DRM_MODE_COLORIMETRY_ITU_709, "ITU_709" },
> >> +	/* Standard Definition Colorimetry based on IEC 61966-2-4 */
> >> +	{ DRM_MODE_COLORIMETRY_XV_YCC_601, "XV_YCC_601" },
> >> +	/* High Definition Colorimetry based on IEC 61966-2-4 */
> >> +	{ DRM_MODE_COLORIMETRY_XV_YCC_709, "XV_YCC_709" },
> >> +	/* Colorimetry based on IEC 61966-2-1/Amendment 1 */
> >> +	{ DRM_MODE_COLORIMETRY_S_YCC_601, "S_YCC_601" },
> >> +	/* Colorimetry based on IEC 61966-2-5 [33] */
> >> +	{ DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" },
> >> +	/* Colorimetry based on IEC 61966-2-5 */
> >> +	{ DRM_MODE_COLORIMETRY_OPRGB, "opRGB" }, };
> >
> >Why are we duplicating these in the driver code? And why do we have different
> >sets for gen10 and older?
> 
> This is to expose colorspaces which a particular platforms supports instead of giving
> full HDMI protocol supported list as some platforms may not support all of it.
> 
> Here, BT2020 support is added for Gen10 onwards, while older platforms support
> all  the rest apart from BT2020.

This is just about the infoframe. I don't think we have any platform
limitations there.

> 
> For sink supported colorspaces, userspace will retrieve it from EDID and set the colorspace
> which is supported by both platform as well as sink.
> 
> Regards,
> Uma Shankar
> 
> >> +
> >>  int intel_connector_init(struct intel_connector *connector)  {
> >>  	struct intel_digital_connector_state *conn_state; @@ -265,3 +307,24
> >> @@ int intel_ddc_get_modes(struct drm_connector *connector,
> >>  			connector->dev->mode_config.aspect_ratio_property,
> >>  			DRM_MODE_PICTURE_ASPECT_NONE);
> >>  }
> >> +
> >> +void
> >> +intel_attach_colorspace_property(struct drm_connector *connector) {
> >> +	struct drm_device *dev = connector->dev;
> >> +	struct drm_i915_private *dev_priv = to_i915(dev);
> >> +
> >> +	if (INTEL_GEN(dev_priv) >= 10) {
> >> +		if (!drm_mode_create_colorspace_property(connector,
> >> +			gen10_hdmi_colorspaces,
> >> +			ARRAY_SIZE(gen10_hdmi_colorspaces)))
> >> +			drm_object_attach_property(&connector->base,
> >> +				connector->colorspace_property, 0);
> >> +	} else {
> >> +		if (!drm_mode_create_colorspace_property(connector,
> >> +			legacy_hdmi_colorspaces,
> >> +			ARRAY_SIZE(legacy_hdmi_colorspaces)))
> >> +			drm_object_attach_property(&connector->base,
> >> +				connector->colorspace_property, 0);
> >> +	}
> >> +}
> >> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> >> b/drivers/gpu/drm/i915/intel_drv.h
> >> index 85b913e..5178a9a 100644
> >> --- a/drivers/gpu/drm/i915/intel_drv.h
> >> +++ b/drivers/gpu/drm/i915/intel_drv.h
> >> @@ -1783,6 +1783,7 @@ int intel_connector_update_modes(struct
> >> drm_connector *connector,  void
> >> intel_attach_force_audio_property(struct drm_connector *connector);
> >> void intel_attach_broadcast_rgb_property(struct drm_connector
> >> *connector);  void intel_attach_aspect_ratio_property(struct
> >> drm_connector *connector);
> >> +void intel_attach_colorspace_property(struct drm_connector
> >> +*connector);
> >>
> >>  /* intel_csr.c */
> >>  void intel_csr_ucode_init(struct drm_i915_private *); diff --git
> >> a/drivers/gpu/drm/i915/intel_hdmi.c
> >> b/drivers/gpu/drm/i915/intel_hdmi.c
> >> index 97a98e1..9ed00e3 100644
> >> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> >> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> >> @@ -498,6 +498,24 @@ static void intel_hdmi_set_avi_infoframe(struct
> >intel_encoder *encoder,
> >>  	else
> >>  		frame.avi.colorspace = HDMI_COLORSPACE_RGB;
> >>
> >> +	if (conn_state->colorspace == DRM_MODE_COLORIMETRY_DEFAULT) {
> >> +		/* Set ITU 709 as default for HDMI */
> >> +		frame.avi.colorimetry = DRM_MODE_COLORIMETRY_ITU_709;
> >> +	} else if (conn_state->colorspace <
> >DRM_MODE_COLORIMETRY_XV_YCC_601) {
> >> +		frame.avi.colorimetry = conn_state->colorspace;
> >> +	} else {
> >> +		frame.avi.colorimetry = HDMI_COLORIMETRY_EXTENDED;
> >> +		/*
> >> +		 * Starting from extended list where COLORIMETRY_XV_YCC_601
> >> +		 * is the first extended mode and its value is 0 as per HDMI
> >> +		 * specification.
> >> +		 * TODO: This needs to be extended for LSPCON implementation
> >> +		 * as well. Will be implemented separately.
> >> +		 */
> >> +		frame.avi.extended_colorimetry = conn_state->colorspace -
> >> +			DRM_MODE_COLORIMETRY_XV_YCC_601;
> >> +	}
> >> +
> >>  	drm_hdmi_avi_infoframe_quant_range(&frame.avi,
> >>  					   conn_state->connector,
> >>  					   adjusted_mode,
> >> @@ -2143,10 +2161,16 @@ static void intel_hdmi_destroy(struct
> >> drm_connector *connector)  intel_hdmi_add_properties(struct intel_hdmi
> >> *intel_hdmi, struct drm_connector *connector)  {
> >>  	struct drm_i915_private *dev_priv = to_i915(connector->dev);
> >> +	struct intel_digital_port *intel_dig_port =
> >> +				hdmi_to_dig_port(intel_hdmi);
> >>
> >>  	intel_attach_force_audio_property(connector);
> >>  	intel_attach_broadcast_rgb_property(connector);
> >>  	intel_attach_aspect_ratio_property(connector);
> >> +	/* Attach Colorspace property for Non LSPCON based device */
> >> +	if (!intel_dig_port->lspcon.active)
> >> +		intel_attach_colorspace_property(connector);
> >> +
> >>  	drm_connector_attach_content_type_property(connector);
> >>  	connector->state->picture_aspect_ratio =
> >HDMI_PICTURE_ASPECT_NONE;
> >>
> >> --
> >> 1.9.1
> >>
> >> _______________________________________________
> >> dri-devel mailing list
> >> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> >> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >
> >--
> >Ville Syrjälä
> >Intel
> >_______________________________________________
> >dri-devel mailing list
> >dri-devel@xxxxxxxxxxxxxxxxxxxxx
> >https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux