Hi, this series has gone through multiple rounds of review and there are no outstanding comments. It seems it should be ready to land, or is there anything left that needs to be addressed? Thanks Matthias On Wed, Dec 19, 2018 at 03:55:20PM -0800, Matthias Kaehlcke wrote: > The MSM DSI PHY drivers currently hardcode the name and the rate of > the PHY ref clock. Get the ref clock from the device tree instead. > > Note: testing of this series was limited to SDM845 and the 10nm PHY > > Major changes in v5: > - none (see per-patch change log for minor changes) > > Major changes in v4: > - always use parent rate for 28nm and 28nm 8960 PHYs > > Major changes in v3: > - keep supporting DTs without ref clock for the 28nm and the 28nm > 8960 PHYs > - added patch to add ref clock to qcom-apq8064.dtsi > > Major changes in v2: > - apply to all MSM DSI PHY drivers, not only 10nm > > Matthias Kaehlcke (8): > dt-bindings: msm/dsi: Add ref clock for PHYs > drm/msm/dsi: 28nm 8960 PHY: Get ref clock from the DT > drm/msm/dsi: 28nm PHY: Get ref clock from the DT > drm/msm/dsi: 14nm PHY: Get ref clock from the DT > drm/msm/dsi: 10nm PHY: Get ref clock from the DT > arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY > arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs > ARM: dts: qcom-apq8064: Set 'xo_board' as ref clock of the DSI PHY > > .../devicetree/bindings/display/msm/dsi.txt | 1 + > arch/arm/boot/dts/qcom-apq8064.dtsi | 5 +-- > arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +-- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 +++--- > drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 20 +++++++++-- > drivers/gpu/drm/msm/dsi/pll/dsi_pll_14nm.c | 23 +++++++++--- > drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 36 +++++++++++++------ > .../gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 24 ++++++++++--- > 8 files changed, 92 insertions(+), 32 deletions(-) > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
