Hi, On Fri, Jan 25, 2019 at 11:56:09AM +0000, Russell King - ARM Linux admin wrote: > (Removed what I assume is a typo on the Cc line - nd@xxxxxxx) Sadly not. I have to Cc (not Bcc!) nd@xxxxxxx to remove the confidentiality disclaimer which would otherwise be added. Ugly, but my only option. > > On Fri, Jan 25, 2019 at 11:45:10AM +0000, Brian Starkey wrote: > > Hi Russell, > > > > On Fri, Jan 25, 2019 at 09:40:38AM +0000, Russell King - ARM Linux admin wrote: > > > Hi, > > > > > > This series adds support for programming the SPD and vendor infoframes. > > > > > > It also adds support for pixel repeated modes - we were not rejecting > > > these modes, but we also didn't have the implementation to support > > > them. As their implementation is simple, add it rather than rejecting > > > the modes. > > > > > > Support is also added for the bridge timing information, that upstream > > > components may wish to use to adjust their output appropriately. > > > > > > Lastly, rather than merely passing through the full-range RGB from the > > > CRTC, adapt the RGB range to the capabilities of the display and the > > > default range for the mode. This means that if the display does not > > > support the Q bit in the video infoframe, and the mode is defined to > > > have limited range RGB, we will compress the output RGB range to > > > limited range. > > > > > > Tested on 4.20 with a Panasonic TV. > > > > > > drm/i2c: tda998x: add support for pixel repeated modes > > > drm/i2c: tda998x: add bridge timing information > > > drm/i2c: tda998x: add support for writing SPD > > > drm/i2c: tda998x: add vendor specific infoframe support > > > drm/i2c: tda998x: improve correctness of quantisation range > > > > Only this cover letter made it to my inbox (and the dri-devel > > archives, for what they're worth). > > I think leave it a while longer - the series emails were accepted by > gabe.freedesktop.org at 09:51 UTC, maybe it's still thinking about > them. If not, I don't think there's anything I can do about it. > > > Is there somewhere I can take a look at the patches? > > http://git.armlinux.org.uk/cgit/linux-arm.git/log/?h=drm-tda998x-devel > > contains very similar patches, but based on 4.20. The series I posted > were those patches rebased on the linux-drm drm-next branch - and there > were some minor conflicts. Great, thanks. -Brian > > -- > RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ > FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up > According to speedtest.net: 11.9Mbps down 500kbps up _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
