[PATCH 2/2] phy: Add driver for mixel dphy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds support for the Mixel DPHY as found on i.MX8 CPUs but since
this is an IP core it will likely be found on others in the future. So
instead of adding this to the nwl host driver make it a generic PHY
driver.

The driver supports the i.MX8MQ. Support for i.MX8QM and i.MX8QXP can be
added once the necessary system controller bits are in via
mixel_dpy_ops.

Signed-off-by: Guido Günther <agx@xxxxxxxxxxx>
---
 drivers/phy/Kconfig               |   7 +
 drivers/phy/Makefile              |   1 +
 drivers/phy/phy-mixel-mipi-dphy.c | 449 ++++++++++++++++++++++++++++++
 3 files changed, 457 insertions(+)
 create mode 100644 drivers/phy/phy-mixel-mipi-dphy.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 250abe290ca1..9195b5876bcc 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -48,6 +48,13 @@ config PHY_XGENE
 	help
 	  This option enables support for APM X-Gene SoC multi-purpose PHY.
 
+config PHY_MIXEL_MIPI_DPHY
+	bool
+	depends on OF
+	select GENERIC_PHY
+	select GENERIC_PHY_MIPI_DPHY
+	default ARCH_MXC && ARM64
+
 source "drivers/phy/allwinner/Kconfig"
 source "drivers/phy/amlogic/Kconfig"
 source "drivers/phy/broadcom/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 0d9fddc498a6..264f570b67bf 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_MEDIATEK)		+= mediatek/
 obj-$(CONFIG_ARCH_RENESAS)		+= renesas/
 obj-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip/
 obj-$(CONFIG_ARCH_TEGRA)		+= tegra/
+obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)	+= phy-mixel-mipi-dphy.o
 obj-y					+= broadcom/	\
 					   cadence/	\
 					   freescale/	\
diff --git a/drivers/phy/phy-mixel-mipi-dphy.c b/drivers/phy/phy-mixel-mipi-dphy.c
new file mode 100644
index 000000000000..8a43dab79cee
--- /dev/null
+++ b/drivers/phy/phy-mixel-mipi-dphy.c
@@ -0,0 +1,449 @@
+/*
+ * Copyright 2017 NXP
+ * Copyright 2019 Purism SPC
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+/* #define DEBUG 1 */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* DPHY registers */
+#define DPHY_PD_DPHY			0x00
+#define DPHY_M_PRG_HS_PREPARE		0x04
+#define DPHY_MC_PRG_HS_PREPARE		0x08
+#define DPHY_M_PRG_HS_ZERO		0x0c
+#define DPHY_MC_PRG_HS_ZERO		0x10
+#define DPHY_M_PRG_HS_TRAIL		0x14
+#define DPHY_MC_PRG_HS_TRAIL		0x18
+#define DPHY_PD_PLL			0x1c
+#define DPHY_TST			0x20
+#define DPHY_CN				0x24
+#define DPHY_CM				0x28
+#define DPHY_CO				0x2c
+#define DPHY_LOCK			0x30
+#define DPHY_LOCK_BYP			0x34
+#define DPHY_TX_RCAL			0x38
+#define DPHY_AUTO_PD_EN			0x3c
+#define DPHY_RXLPRP			0x40
+#define DPHY_RXCDRP			0x44
+
+#define MBPS(x) ((x) * 1000000)
+
+#define DATA_RATE_MAX_SPEED MBPS(1500)
+#define DATA_RATE_MIN_SPEED MBPS(80)
+
+#define CN_BUF	0xcb7a89c0
+#define CO_BUF	0x63
+#define CM(x)	(				\
+		((x) <  32)?0xe0|((x)-16) :	\
+		((x) <  64)?0xc0|((x)-32) :	\
+		((x) < 128)?0x80|((x)-64) :	\
+		((x) - 128))
+#define CN(x)	(((x) == 1)?0x1f : (((CN_BUF)>>((x)-1))&0x1f))
+#define CO(x)	((CO_BUF)>>(8-(x))&0x3)
+
+/* PHY power on is LOW_ENABLE */
+#define PWR_ON	0
+#define PWR_OFF	1
+
+struct mixel_dphy_cfg {
+	u32 cm;
+	u32 cn;
+	u32 co;
+	unsigned long hs_clk_rate;
+	u8 mc_prg_hs_prepare;
+	u8 m_prg_hs_prepare;
+	u8 mc_prg_hs_zero;
+	u8 m_prg_hs_zero;
+	u8 mc_prg_hs_trail;
+	u8 m_prg_hs_trail;
+};
+
+struct mixel_dphy_priv;
+struct mixel_dphy_ops {
+	int (*probe)(struct mixel_dphy_priv *priv);
+	int (*power_on)(struct phy *phy);
+	int (*power_off)(struct phy *phy);
+};
+
+struct mixel_dphy_priv {
+	struct mixel_dphy_cfg cfg;
+	void __iomem *regs;
+	struct clk *phy_ref_clk;
+	struct mutex lock;
+	const struct mixel_dphy_ops *ops;
+};
+
+static inline u32 phy_read(struct phy *phy, unsigned int reg)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+	return readl(priv->regs + reg);
+}
+
+static inline void phy_write(struct phy *phy, u32 value, unsigned int reg)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+	writel(value, priv->regs + reg);
+}
+
+/* Find a ratio close to the desired one using continued fraction
+   approximation ending either at exact match or maximum allowed
+   nominator, denominator. */
+static void get_best_ratio(unsigned long *pnum, unsigned long *pdenom, unsigned max_n, unsigned max_d)
+{
+	unsigned long a = *pnum;
+	unsigned long b = *pdenom;
+	unsigned long c;
+	unsigned n[] = {0, 1};
+	unsigned d[] = {1, 0};
+	unsigned whole;
+	unsigned i = 1;
+	while (b) {
+		i ^= 1;
+		whole = a / b;
+		n[i] += (n[i ^ 1] * whole);
+		d[i] += (d[i ^ 1] * whole);
+		if ((n[i] > max_n) || (d[i] > max_d)) {
+			i ^= 1;
+			break;
+		}
+		c = a - (b * whole);
+		a = b;
+		b = c;
+	}
+	*pnum = n[i];
+	*pdenom = d[i];
+}
+
+static int mixel_dphy_config_from_opts(struct phy *phy,
+	       struct phy_configure_opts_mipi_dphy *dphy_opts,
+	       struct mixel_dphy_cfg *cfg)
+{
+	struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
+	unsigned long ref_clk = clk_get_rate(priv->phy_ref_clk);
+	int i;
+	unsigned long numerator, denominator, frequency;
+	unsigned step;
+
+	if (dphy_opts->hs_clk_rate > DATA_RATE_MAX_SPEED ||
+	    dphy_opts->hs_clk_rate < DATA_RATE_MIN_SPEED)
+		return -EINVAL;
+	cfg->hs_clk_rate = dphy_opts->hs_clk_rate;
+
+	numerator = dphy_opts->hs_clk_rate;
+	denominator = ref_clk;
+	get_best_ratio(&numerator, &denominator, 255, 256);
+	if (!numerator || !denominator) {
+		dev_dbg(&phy->dev, "Invalid %ld/%ld for %ld/%ld\n",
+			numerator, denominator,
+			dphy_opts->hs_clk_rate, ref_clk);
+		return -EINVAL;
+	}
+
+	while ((numerator < 16) && (denominator <= 128)) {
+		numerator <<= 1;
+		denominator <<= 1;
+	}
+	/*
+	 * CM ranges between 16 and 255
+	 * CN ranges between 1 and 32
+	 * CO is power of 2: 1, 2, 4, 8
+	 */
+	i = __ffs(denominator);
+	if (i > 3)
+		i = 3;
+	cfg->cn = denominator >> i;
+	cfg->co = 1 << i;
+	cfg->cm = numerator;
+
+	if (cfg->cm < 16 || cfg->cm > 255 ||
+	    cfg->cn < 1 || cfg->cn > 32 ||
+	    cfg->co < 1 || cfg->co > 8) {
+		dev_err(&phy->dev, "Invalid CM/CN/CO values: %u/%u/%u\n",
+			cfg->cm, cfg->cn, cfg->co);
+		dev_err(&phy->dev, "for hs_clk/ref_clk=%ld/%ld ⩰ %ld/%ld\n",
+			dphy_opts->hs_clk_rate, ref_clk,
+			numerator, denominator);
+		return -EINVAL;
+	}
+
+	frequency = ref_clk * numerator / (2 * denominator);
+	dev_info(&phy->dev, "freq=%ld, hs_clk/ref_clk=%ld/%ld ⩰ %ld/%ld\n",
+		 frequency, dphy_opts->hs_clk_rate, ref_clk,
+		 numerator, denominator);
+
+	/*
+	 * Section 13.5.11 in the imx8mq reference manual
+	 * IMX8MDQLQRM Rev. 0, 01/2018 does not document
+	 * the values so use the ones found in NXPs BSP.
+	 */
+	cfg->m_prg_hs_prepare = cfg->hs_clk_rate > MBPS(250) ? 0 : 1;
+	cfg->mc_prg_hs_prepare = cfg->hs_clk_rate < MBPS(1000) ? 0 : 1;
+	cfg->m_prg_hs_zero = cfg->hs_clk_rate < MBPS(1000) ? 9 : 10;
+	step = (DATA_RATE_MAX_SPEED - DATA_RATE_MIN_SPEED) / 48;
+	cfg->mc_prg_hs_zero = ((cfg->hs_clk_rate - DATA_RATE_MIN_SPEED) / step) + 1;
+	if (cfg->hs_clk_rate < MBPS(1000)) {
+		cfg->m_prg_hs_trail = 0x05;
+		cfg->mc_prg_hs_trail = 0x05;
+	} else if (cfg->hs_clk_rate < MBPS(1500)) {
+		cfg->m_prg_hs_trail = 0x0C;
+		cfg->mc_prg_hs_trail = 0x0C;
+	} else {
+		cfg->m_prg_hs_trail = 0x0F;
+		cfg->mc_prg_hs_trail = 0x0F;
+	}
+	dev_dbg(&phy->dev, "hs_prepare: %u, clk_prepare: %u, "
+		"hs_prepare: %u, clk_prepare: %u, "
+		"hs_trail: %u, clk_trail: %u\n",
+		cfg->m_prg_hs_prepare, cfg->mc_prg_hs_prepare,
+		cfg->m_prg_hs_zero, cfg->mc_prg_hs_zero,
+		cfg->m_prg_hs_trail, cfg->mc_prg_hs_trail);
+
+	return 0;
+}
+
+static void mixel_phy_set_hs_timings(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+	phy_write(phy, priv->cfg.m_prg_hs_prepare, DPHY_M_PRG_HS_PREPARE);
+	phy_write(phy, priv->cfg.mc_prg_hs_prepare, DPHY_MC_PRG_HS_PREPARE);
+	phy_write(phy, priv->cfg.m_prg_hs_zero, DPHY_M_PRG_HS_ZERO);
+	phy_write(phy, priv->cfg.mc_prg_hs_zero, DPHY_MC_PRG_HS_ZERO);
+	phy_write(phy, priv->cfg.m_prg_hs_trail, DPHY_M_PRG_HS_TRAIL);
+	phy_write(phy, priv->cfg.mc_prg_hs_trail, DPHY_MC_PRG_HS_TRAIL);
+}
+
+static int mixel_dphy_set_pll_params(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
+
+	if (priv->cfg.cm < 16 || priv->cfg.cm > 255 ||
+	    priv->cfg.cn < 1 || priv->cfg.cn > 32 ||
+	    priv->cfg.co < 1 || priv->cfg.co > 8) {
+		dev_err(&phy->dev, "Invalid CM/CN/CO values! (%u/%u/%u)\n",
+			priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
+		return -EINVAL;
+	}
+	dev_dbg(&phy->dev, "Using CM:%u CN:%u CO:%u\n",
+		priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
+	phy_write(phy, CM(priv->cfg.cm), DPHY_CM);
+	phy_write(phy, CN(priv->cfg.cn), DPHY_CN);
+	phy_write(phy, CO(priv->cfg.co), DPHY_CO);
+	return 0;
+}
+
+static int mixel_dphy_ref_power_on(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	u32 lock, timeout;
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
+	clk_prepare_enable(priv->phy_ref_clk);
+
+	phy_write(phy, PWR_ON, DPHY_PD_DPHY);
+	phy_write(phy, PWR_ON, DPHY_PD_PLL);
+
+	timeout = 100;
+	while (!(lock = phy_read(phy, DPHY_LOCK))) {
+		udelay(10);
+		if (--timeout == 0) {
+			dev_err(&phy->dev, "Could not get DPHY lock!\n");
+			mutex_unlock(&priv->lock);
+			return -EINVAL;
+		}
+	}
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int mixel_dphy_ref_power_off(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
+
+	phy_write(phy, PWR_OFF, DPHY_PD_PLL);
+	phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
+
+	clk_disable_unprepare(priv->phy_ref_clk);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int mixel_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	struct mixel_dphy_cfg cfg = { 0 };
+	int ret;
+
+	ret = mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+	if (ret)
+		return ret;
+
+	/* Update the configuration */
+	memcpy(&priv->cfg, &cfg, sizeof(struct mixel_dphy_cfg));
+
+	dev_dbg(&phy->dev, "Using CM:%u CN:%u CO:%u\n",
+		priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
+
+	mutex_lock(&priv->lock);
+
+	phy_write(phy, 0x00, DPHY_LOCK_BYP);
+	phy_write(phy, 0x01, DPHY_TX_RCAL);
+	phy_write(phy, 0x00, DPHY_AUTO_PD_EN);
+	phy_write(phy, 0x01, DPHY_RXLPRP);
+	phy_write(phy, 0x01, DPHY_RXCDRP);
+	phy_write(phy, 0x25, DPHY_TST);
+
+	mixel_phy_set_hs_timings(phy);
+	ret = mixel_dphy_set_pll_params(phy);
+	if (ret < 0) {
+		mutex_unlock(&priv->lock);
+		return ret;
+	}
+
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int mixel_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
+			       union phy_configure_opts *opts)
+{
+	struct mixel_dphy_cfg cfg = { 0 };
+
+	if (mode != PHY_MODE_MIPI_DPHY)
+		return -EINVAL;
+
+	return mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+}
+
+static int mixel_dphy_power_on(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->ops->power_on)
+		return priv->ops->power_on(phy);
+	return 0;
+}
+
+static int mixel_dphy_power_off(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->ops->power_off)
+		return priv->ops->power_off(phy);
+	return 0;
+}
+
+/*
+ * This is the reference implementation of DPHY hooks. Specific integration of
+ * this IP may have to re-implement some of them depending on how they decided
+ * to wire things in the SoC.
+ */
+static const struct mixel_dphy_ops mixel_dphy_ref_ops = {
+	.power_on = mixel_dphy_ref_power_on,
+	.power_off = mixel_dphy_ref_power_off,
+};
+
+static const struct phy_ops mixel_dphy_ops = {
+	.power_on = mixel_dphy_power_on,
+	.power_off = mixel_dphy_power_off,
+	.configure = mixel_dphy_configure,
+	.validate = mixel_dphy_validate,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id mixel_dphy_of_match[] = {
+	{ .compatible = "mixel,imx8mq-mipi-dphy", .data = &mixel_dphy_ref_ops },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mixel_dphy_of_match);
+
+static int mixel_dphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_provider *phy_provider;
+	struct mixel_dphy_priv *priv;
+	struct resource *res;
+	struct phy *phy;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->ops = of_device_get_match_data(&pdev->dev);
+	if (!priv->ops)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	priv->regs = devm_ioremap(dev, res->start, SZ_256);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	priv->phy_ref_clk = devm_clk_get(&pdev->dev, "phy_ref");
+	if (IS_ERR(priv->phy_ref_clk)) {
+		dev_err(dev, "No phy_ref clock found");
+		return PTR_ERR(priv->phy_ref_clk);
+	}
+	dev_dbg(dev, "phy_ref clock rate: %lu", clk_get_rate(priv->phy_ref_clk));
+
+	mutex_init(&priv->lock);
+	dev_set_drvdata(dev, priv);
+
+	if (priv->ops->probe) {
+		ret = priv->ops->probe(priv);
+		if (ret)
+			return ret;
+	}
+
+	phy = devm_phy_create(dev, np, &mixel_dphy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "Failed to create phy %ld\n", PTR_ERR(phy));
+		return PTR_ERR(phy);
+	}
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver mixel_dphy_driver = {
+	.probe	= mixel_dphy_probe,
+	.driver = {
+		.name = "mixel-mipi-dphy",
+		.of_match_table	= mixel_dphy_of_match,
+	}
+};
+module_platform_driver(mixel_dphy_driver);
+
+MODULE_AUTHOR("NXP Semiconductor");
+MODULE_DESCRIPTION("Mixel MIPI-DSI PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux