Hi, Here is a series implementing the burst mode support for DSI. It's been tested on an A33 board with the panel supported on the 4th patch, which should remove all quirks due to a different SoC from the equation. Let me know what you think, Maxime Konstantin Sudakov (2): drm/sun4i: dsi: Add burst support drm/panel: Add Rondo RB070D30 panel Maxime Ripard (2): drm/sun4i: dsi: Restrict DSI tcon clock divider drm/sun4i: dsi: Change the start delay calculation drivers/gpu/drm/panel/Kconfig | 9 +- drivers/gpu/drm/panel/Makefile | 1 +- drivers/gpu/drm/panel/panel-rondo-rb070d30.c | 258 ++++++++++++++++++++- drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 +- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 185 ++++++++++---- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 2 +- 6 files changed, 414 insertions(+), 45 deletions(-) create mode 100644 drivers/gpu/drm/panel/panel-rondo-rb070d30.c base-commit: f6028e7e48b0f3865b0837d400ca783d3d200b62 -- git-series 0.9.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
