Hello,
On Fri, Jan 11, 2019 at 08:49:04AM -0600, Rob Herring wrote:
> On Sat, Dec 29, 2018 at 07:07:19AM +0000, Peter Rosin wrote:
> > DS90C185 has a shutdown pin which does not fit in the lvds-transmitter
> > binding, which is meant to be generic.
> >
> > The sister chip DS90C187 is similar to DS90C185, describe it here as well.
> >
> > Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
> > ---
> > .../bindings/display/bridge/lvds-transmitter.txt | 8 +---
> > .../bindings/display/bridge/ti,ds90c185.txt | 55 ++++++++++++++++++++++
> > 2 files changed, 56 insertions(+), 7 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> > index 50220190c203..fd39ad34c383 100644
> > --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> > +++ b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt
> > @@ -22,13 +22,7 @@ among others.
> >
> > Required properties:
> >
> > -- compatible: Must be one or more of the following
> > - - "ti,ds90c185" for the TI DS90C185 FPD-Link Serializer
> > - - "lvds-encoder" for a generic LVDS encoder device
> > -
> > - When compatible with the generic version, nodes must list the
> > - device-specific version corresponding to the device first
> > - followed by the generic version.
>
> I think you should keep something here. I'd reword it to say any encoder
> with additional properties must have a device specific compatible in
> addition.
I was going to mention this too. Maybe
- compatible: Shall contain a device-specific compatible string follow
by "lvds-encoder".
That's stronger than Rob's suggestion, as I don't think we should allow
omitting the device-specific compatible string in any case to make sure
we can preserve backward compatibility in the future.
> > +- compatible: Must be "lvds-encoder"
> >
> > Required nodes:
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt
> > new file mode 100644
> > index 000000000000..e575f996959a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt
> > @@ -0,0 +1,55 @@
> > +Texas Instruments FPD-Link (LVDS) Serializer
> > +--------------------------------------------
> > +
> > +The DS90C185 and DS90C187 are low-power serializers for portable
> > +battery-powered applications that reduces the size of the RGB
> > +interface between the host GPU and the display.
> > +
> > +Required properties:
> > +
> > +- compatible: Should be
> > + "ti,ds90c185", "lvds-encoder" for the TI DS90C185 FPD-Link Serializer
> > + "ti,ds90c187", "lvds-encoder" for the TI DS90C187 FPD-Link Serializer
s/ for/ for/
With these fixed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > +
> > +Optional properties:
> > +
> > +- powerdown-gpios: Power down control GPIO (the PDB pin, active-low)
> > +
> > +Required nodes:
> > +
> > +The devices have two video ports. Their connections are modeled using the OF
> > +graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> > +
> > +- Video port 0 for parallel input
> > +- Video port 1 for LVDS output
> > +
> > +
> > +Example
> > +-------
> > +
> > +lvds-encoder {
> > + compatible = "ti,ds90c185", "lvds-encoder";
> > +
> > + powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + lvds_enc_in: endpoint {
> > + remote-endpoint = <&lcdc_out_rgb>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + lvds_enc_out: endpoint {
> > + remote-endpoint = <&lvds_panel_in>;
> > + };
> > + };
> > + };
> > +};
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
