On Wed, 2019-01-09 at 17:58 +0100, Matthias Brugger wrote:
>
> On 04/01/2019 08:03, chunhui dai wrote:
> > DPI sample on rising and falling edge. It can reduce half data io.
> >
> > Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> > Signed-off-by: chunhui dai <chunhui.dai@xxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/mediatek/mtk_dpi.c | 30 ++++++++++++++++++++++++++++++
> > 1 file changed, 30 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index 4a2f4a6..acb4f47 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -117,6 +117,7 @@ struct mtk_dpi_conf {
> > unsigned int (*cal_factor)(int clock);
> > u32 reg_h_fre_con;
> > bool edge_sel_en;
> > + bool dual_edge;
> > };
> >
> > static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
> > @@ -353,6 +354,15 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi)
> > mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN);
> > }
> >
> > +static void mtk_dpi_config_dual_edge(struct mtk_dpi *dpi)
>
> I think it is clearer if you rename the function to something like:
> mtk_dpi_enable_dual_edge and call it in mtk_dpi_set_display_mode if
> dpi->conf->dual_edge is true.
>
> Regards,
> Matthias
>
I'll fix it in next patch.
Best Regards
Jitao
> > +{
> > + if (dpi->conf->dual_edge) {
> > + mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN |
> > + DDR_4PHASE, DDR_EN | DDR_4PHASE);
> > + mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, EDGE_SEL, EDGE_SEL);
> > + }
> > +}
> > +
> > static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> > enum mtk_dpi_out_color_format format)
> > {
> > @@ -509,6 +519,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
> > mtk_dpi_config_color_format(dpi, dpi->color_format);
> > mtk_dpi_config_2n_h_fre(dpi);
> > mtk_dpi_config_disable_edge(dpi);
> > + mtk_dpi_config_dual_edge(dpi);
> > mtk_dpi_sw_reset(dpi, false);
> >
> > return 0;
> > @@ -669,6 +680,16 @@ static unsigned int mt2701_calculate_factor(int clock)
> > return 1;
> > }
> >
> > +static unsigned int mt8183_calculate_factor(int clock)
> > +{
> > + if (clock <= 27000)
> > + return 8;
> > + else if (clock <= 167000)
> > + return 4;
> > + else
> > + return 2;
> > +}
> > +
> > static const struct mtk_dpi_conf mt8173_conf = {
> > .cal_factor = mt8173_calculate_factor,
> > .reg_h_fre_con = 0xe0,
> > @@ -680,6 +701,12 @@ static unsigned int mt2701_calculate_factor(int clock)
> > .edge_sel_en = true,
> > };
> >
> > +static const struct mtk_dpi_conf mt8183_conf = {
> > + .cal_factor = mt8183_calculate_factor,
> > + .reg_h_fre_con = 0xe0,
> > + .dual_edge = true,
> > +};
> > +
> > static int mtk_dpi_probe(struct platform_device *pdev)
> > {
> > struct device *dev = &pdev->dev;
> > @@ -775,6 +802,9 @@ static int mtk_dpi_remove(struct platform_device *pdev)
> > { .compatible = "mediatek,mt8173-dpi",
> > .data = &mt8173_conf,
> > },
> > + { .compatible = "mediatek,mt8183-dpi",
> > + .data = &mt8183_conf,
> > + },
> > { },
> > };
> >
> >
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
