On Sat, Dec 01, 2018 at 12:31:46PM +0100, Hans de Goede wrote: > The display engine has 2 dithering enable bits which both need to be set > for dithering to happen, 1 in the PIPECONF register which is taken care of > by i9xx_set_pipeconf() and a second bit at the encoder level. > > The dsi code was not setting the encoder level dithering enable bit causing > dithering to be disabled, this commit fixes this. > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > drivers/gpu/drm/i915/vlv_dsi.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c > index c10def5efa22..c21cbfa9653c 100644 > --- a/drivers/gpu/drm/i915/vlv_dsi.c > +++ b/drivers/gpu/drm/i915/vlv_dsi.c > @@ -711,6 +711,10 @@ static void intel_dsi_port_enable(struct intel_encoder *encoder, > LANE_CONFIGURATION_DUAL_LINK_B : > LANE_CONFIGURATION_DUAL_LINK_A; > } > + > + if (intel_dsi->pixel_format != MIPI_DSI_FMT_RGB888) > + temp |= DITHERING_ENABLE; The docs say this was only made to work in C0 stepping. Not sure any BYT-Ts were ever shipped with B2/3, nor am I sure if setting the bit would have any effect there. IMO let's just set the bit and hope for the best. Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > + > /* assert ip_tg_enable signal */ > I915_WRITE(port_ctrl, temp | DPI_ENABLE); > POSTING_READ(port_ctrl); > -- > 2.19.1 -- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
