[PATCH 03/48] drm/radeon/kms: upstream atombios.h updates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Alex Deucher <alexander.deucher@xxxxxxx>

Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
 drivers/gpu/drm/radeon/atombios.h |  929 +++++++++++++++++++++++++++++++++++--
 1 files changed, 883 insertions(+), 46 deletions(-)

diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 1b50ad8..4760466 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -101,6 +101,7 @@
 #define ATOM_LCD_SELFTEST_START									(ATOM_DISABLE+5)
 #define ATOM_LCD_SELFTEST_STOP									(ATOM_ENABLE+5)
 #define ATOM_ENCODER_INIT			                  (ATOM_DISABLE+7)
+#define ATOM_INIT			                          (ATOM_DISABLE+7)
 #define ATOM_GET_STATUS                         (ATOM_DISABLE+8)
 
 #define ATOM_BLANKING         1
@@ -251,25 +252,25 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
   USHORT SetEngineClock;                         //Function Table,directly used by various SW components,latest version 1.1
   USHORT SetMemoryClock;                         //Function Table,directly used by various SW components,latest version 1.1
   USHORT SetPixelClock;                          //Function Table,directly used by various SW components,latest version 1.2  
-  USHORT DynamicClockGating;                     //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
+  USHORT EnableDispPowerGating;                  //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
   USHORT ResetMemoryDLL;                         //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
   USHORT ResetMemoryDevice;                      //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
-  USHORT MemoryPLLInit;
-  USHORT AdjustDisplayPll;												//only used by Bios
+  USHORT MemoryPLLInit;                          //Atomic Table,  used only by Bios
+  USHORT AdjustDisplayPll;											 //Atomic Table,  used by various SW componentes. 
   USHORT AdjustMemoryController;                 //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock                
   USHORT EnableASIC_StaticPwrMgt;                //Atomic Table,  only used by Bios
   USHORT ASIC_StaticPwrMgtStatusChange;          //Obsolete ,     only used by Bios   
   USHORT DAC_LoadDetection;                      //Atomic Table,  directly used by various SW components,latest version 1.2  
   USHORT LVTMAEncoderControl;                    //Atomic Table,directly used by various SW components,latest version 1.3
-  USHORT LCD1OutputControl;                      //Atomic Table,  directly used by various SW components,latest version 1.1 
+  USHORT HW_Misc_Operation;                      //Atomic Table,  directly used by various SW components,latest version 1.1 
   USHORT DAC1EncoderControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1  
   USHORT DAC2EncoderControl;                     //Atomic Table,  directly used by various SW components,latest version 1.1 
   USHORT DVOOutputControl;                       //Atomic Table,  directly used by various SW components,latest version 1.1 
   USHORT CV1OutputControl;                       //Atomic Table,  Atomic Table,  Obsolete from Ry6xx, use DAC2 Output instead 
-  USHORT GetConditionalGoldenSetting;            //only used by Bios
+  USHORT GetConditionalGoldenSetting;            //Only used by Bios
   USHORT TVEncoderControl;                       //Function Table,directly used by various SW components,latest version 1.1
-  USHORT TMDSAEncoderControl;                    //Atomic Table,  directly used by various SW components,latest version 1.3
-  USHORT LVDSEncoderControl;                     //Atomic Table,  directly used by various SW components,latest version 1.3
+  USHORT PatchMCSetting;                         //only used by BIOS
+  USHORT MC_SEQ_Control;                         //only used by BIOS
   USHORT TV1OutputControl;                       //Atomic Table,  Obsolete from Ry6xx, use DAC2 Output instead
   USHORT EnableScaler;                           //Atomic Table,  used only by Bios
   USHORT BlankCRTC;                              //Atomic Table,  directly used by various SW components,latest version 1.1 
@@ -282,7 +283,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
   USHORT SetCRTC_Replication;                    //Atomic Table,  used only by Bios
   USHORT SelectCRTC_Source;                      //Atomic Table,  directly used by various SW components,latest version 1.1 
   USHORT EnableGraphSurfaces;                    //Atomic Table,  used only by Bios
-  USHORT UpdateCRTC_DoubleBufferRegisters;
+  USHORT UpdateCRTC_DoubleBufferRegisters;			 //Atomic Table,  used only by Bios
   USHORT LUT_AutoFill;                           //Atomic Table,  only used by Bios
   USHORT EnableHW_IconCursor;                    //Atomic Table,  only used by Bios
   USHORT GetMemoryClock;                         //Atomic Table,  directly used by various SW components,latest version 1.1 
@@ -308,27 +309,36 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
   USHORT SetVoltage;                             //Function Table,directly and/or indirectly used by various SW components,latest version 1.1
   USHORT DAC1OutputControl;                      //Atomic Table,  directly used by various SW components,latest version 1.1
   USHORT DAC2OutputControl;                      //Atomic Table,  directly used by various SW components,latest version 1.1
-  USHORT SetupHWAssistedI2CStatus;               //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
+  USHORT ComputeMemoryClockParam;                //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
   USHORT ClockSource;                            //Atomic Table,  indirectly used by various SW components,called from ASIC_Init
   USHORT MemoryDeviceInit;                       //Atomic Table,  indirectly used by various SW components,called from SetMemoryClock
-  USHORT EnableYUV;                              //Atomic Table,  indirectly used by various SW components,called from EnableVGARender
+  USHORT GetDispObjectInfo;                      //Atomic Table,  indirectly used by various SW components,called from EnableVGARender
   USHORT DIG1EncoderControl;                     //Atomic Table,directly used by various SW components,latest version 1.1
   USHORT DIG2EncoderControl;                     //Atomic Table,directly used by various SW components,latest version 1.1
   USHORT DIG1TransmitterControl;                 //Atomic Table,directly used by various SW components,latest version 1.1
   USHORT DIG2TransmitterControl;	               //Atomic Table,directly used by various SW components,latest version 1.1 
   USHORT ProcessAuxChannelTransaction;					 //Function Table,only used by Bios
   USHORT DPEncoderService;											 //Function Table,only used by Bios
+  USHORT GetVoltageInfo;                         //Function Table,only used by Bios since SI
 }ATOM_MASTER_LIST_OF_COMMAND_TABLES;   
 
 // For backward compatible 
 #define ReadEDIDFromHWAssistedI2C                ProcessI2cChannelTransaction
-#define UNIPHYTransmitterControl						     DIG1TransmitterControl
-#define LVTMATransmitterControl							     DIG2TransmitterControl
+#define DPTranslatorControl                      DIG2EncoderControl
+#define UNIPHYTransmitterControl			     DIG1TransmitterControl
+#define LVTMATransmitterControl				     DIG2TransmitterControl
 #define SetCRTC_DPM_State                        GetConditionalGoldenSetting
 #define SetUniphyInstance                        ASIC_StaticPwrMgtStatusChange
 #define HPDInterruptService                      ReadHWAssistedI2CStatus
 #define EnableVGA_Access                         GetSCLKOverMCLKRatio
-#define GetDispObjectInfo                        EnableYUV 
+#define EnableYUV                                GetDispObjectInfo                         
+#define DynamicClockGating                       EnableDispPowerGating
+#define SetupHWAssistedI2CStatus                 ComputeMemoryClockParam
+
+#define TMDSAEncoderControl                      PatchMCSetting
+#define LVDSEncoderControl                       MC_SEQ_Control
+#define LCD1OutputControl                        HW_Misc_Operation
+
 
 typedef struct _ATOM_MASTER_COMMAND_TABLE
 {
@@ -495,6 +505,34 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5
 // ucInputFlag
 #define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN  1   // 1-StrobeMode, 0-PerformanceMode
 
+// use for ComputeMemoryClockParamTable
+typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1
+{
+  union
+  {
+    ULONG  ulClock;         
+    ATOM_S_MPLL_FB_DIVIDER   ulFbDiv;         //Output:UPPER_WORD=FB_DIV_INTEGER,  LOWER_WORD=FB_DIV_FRAC shl (16-FB_FRACTION_BITS)
+  };
+  UCHAR   ucDllSpeed;                         //Output 
+  UCHAR   ucPostDiv;                          //Output
+  union{
+    UCHAR   ucInputFlag;                      //Input : ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN: 1-StrobeMode, 0-PerformanceMode
+    UCHAR   ucPllCntlFlag;                    //Output: 
+  };
+  UCHAR   ucBWCntl;                       
+}COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1;
+
+// definition of ucInputFlag
+#define MPLL_INPUT_FLAG_STROBE_MODE_EN          0x01
+// definition of ucPllCntlFlag
+#define MPLL_CNTL_FLAG_VCO_MODE_MASK            0x03 
+#define MPLL_CNTL_FLAG_BYPASS_DQ_PLL            0x04
+#define MPLL_CNTL_FLAG_QDR_ENABLE               0x08
+#define MPLL_CNTL_FLAG_AD_HALF_RATE             0x10
+
+//MPLL_CNTL_FLAG_BYPASS_AD_PLL has a wrong name, should be BYPASS_DQ_PLL
+#define MPLL_CNTL_FLAG_BYPASS_AD_PLL            0x04
+
 typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER
 {
   ATOM_COMPUTE_CLOCK_FREQ ulClock;
@@ -562,6 +600,16 @@ typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS
 #define  DYNAMIC_CLOCK_GATING_PS_ALLOCATION  DYNAMIC_CLOCK_GATING_PARAMETERS
 
 /****************************************************************************/	
+// Structure used by EnableDispPowerGatingTable.ctb
+/****************************************************************************/	
+typedef struct _ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1 
+{
+  UCHAR ucDispPipeId;                 // ATOM_CRTC1, ATOM_CRTC2, ...
+  UCHAR ucEnable;                     // ATOM_ENABLE or ATOM_DISABLE
+  UCHAR ucPadding[2];
+}ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1;
+
+/****************************************************************************/	
 // Structure used by EnableASIC_StaticPwrMgtTable.ctb
 /****************************************************************************/	
 typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
@@ -807,6 +855,7 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ		  0x00
 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ		  0x01
 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ		  0x02
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_3_24GHZ		  0x03
 #define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL					  0x70
 #define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER					  0x00
 #define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER					  0x10
@@ -814,6 +863,7 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
 #define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER					  0x30
 #define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER					  0x40
 #define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER					  0x50
+#define ATOM_ENCODER_CONFIG_V4_DIG6_ENCODER					  0x60
 
 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4
 {
@@ -1171,6 +1221,106 @@ typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4
 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3           	0x80	//EF
 
 
+typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V5
+{
+#if ATOM_BIG_ENDIAN
+  UCHAR ucReservd1:1;
+  UCHAR ucHPDSel:3;
+  UCHAR ucPhyClkSrcId:2;            
+  UCHAR ucCoherentMode:1;            
+  UCHAR ucReserved:1;
+#else
+  UCHAR ucReserved:1;
+  UCHAR ucCoherentMode:1;            
+  UCHAR ucPhyClkSrcId:2;            
+  UCHAR ucHPDSel:3;
+  UCHAR ucReservd1:1;
+#endif
+}ATOM_DIG_TRANSMITTER_CONFIG_V5;
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
+{
+  USHORT usSymClock;		        // Encoder Clock in 10kHz,(DP mode)= linkclock/10, (TMDS/LVDS/HDMI)= pixel clock,  (HDMI deep color), =pixel clock * deep_color_ratio
+  UCHAR  ucPhyId;                   // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF
+  UCHAR  ucAction;				    // define as ATOM_TRANSMITER_ACTION_xxx
+  UCHAR  ucLaneNum;                 // indicate lane number 1-8
+  UCHAR  ucConnObjId;               // Connector Object Id defined in ObjectId.h
+  UCHAR  ucDigMode;                 // indicate DIG mode
+  union{
+  ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
+  UCHAR ucConfig;
+  };
+  UCHAR  ucDigEncoderSel;           // indicate DIG front end encoder 
+  UCHAR  ucDPLaneSet;
+  UCHAR  ucReserved;
+  UCHAR  ucReserved1;
+}DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5;
+
+//ucPhyId
+#define ATOM_PHY_ID_UNIPHYA                                 0  
+#define ATOM_PHY_ID_UNIPHYB                                 1
+#define ATOM_PHY_ID_UNIPHYC                                 2
+#define ATOM_PHY_ID_UNIPHYD                                 3
+#define ATOM_PHY_ID_UNIPHYE                                 4
+#define ATOM_PHY_ID_UNIPHYF                                 5
+#define ATOM_PHY_ID_UNIPHYG                                 6
+
+// ucDigEncoderSel
+#define ATOM_TRANMSITTER_V5__DIGA_SEL                       0x01
+#define ATOM_TRANMSITTER_V5__DIGB_SEL                       0x02
+#define ATOM_TRANMSITTER_V5__DIGC_SEL                       0x04
+#define ATOM_TRANMSITTER_V5__DIGD_SEL                       0x08
+#define ATOM_TRANMSITTER_V5__DIGE_SEL                       0x10
+#define ATOM_TRANMSITTER_V5__DIGF_SEL                       0x20
+#define ATOM_TRANMSITTER_V5__DIGG_SEL                       0x40
+
+// ucDigMode
+#define ATOM_TRANSMITTER_DIGMODE_V5_DP                      0
+#define ATOM_TRANSMITTER_DIGMODE_V5_LVDS                    1
+#define ATOM_TRANSMITTER_DIGMODE_V5_DVI                     2
+#define ATOM_TRANSMITTER_DIGMODE_V5_HDMI                    3
+#define ATOM_TRANSMITTER_DIGMODE_V5_SDVO                    4
+#define ATOM_TRANSMITTER_DIGMODE_V5_DP_MST                  5
+
+// ucDPLaneSet
+#define DP_LANE_SET__0DB_0_4V                               0x00
+#define DP_LANE_SET__0DB_0_6V                               0x01
+#define DP_LANE_SET__0DB_0_8V                               0x02
+#define DP_LANE_SET__0DB_1_2V                               0x03
+#define DP_LANE_SET__3_5DB_0_4V                             0x08  
+#define DP_LANE_SET__3_5DB_0_6V                             0x09
+#define DP_LANE_SET__3_5DB_0_8V                             0x0a
+#define DP_LANE_SET__6DB_0_4V                               0x10
+#define DP_LANE_SET__6DB_0_6V                               0x11
+#define DP_LANE_SET__9_5DB_0_4V                             0x18  
+
+// ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
+// Bit1
+#define ATOM_TRANSMITTER_CONFIG_V5_COHERENT				          0x02
+
+// Bit3:2
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_MASK 	        0x0c
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_SHIFT		    0x02
+
+#define ATOM_TRANSMITTER_CONFIG_V5_P1PLL         		        0x00
+#define ATOM_TRANSMITTER_CONFIG_V5_P2PLL		                0x04
+#define ATOM_TRANSMITTER_CONFIG_V5_P0PLL		                0x08   
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SRC_EXT           0x0c
+// Bit6:4
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_MASK		          0x70
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_SHIFT		      0x04
+
+#define ATOM_TRANSMITTER_CONFIG_V5_NO_HPD_SEL				        0x00
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD1_SEL				          0x10
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD2_SEL				          0x20
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD3_SEL				          0x30
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD4_SEL				          0x40
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD5_SEL				          0x50
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD6_SEL				          0x60
+
+#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION_V1_5            DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
+
+
 /****************************************************************************/	
 // Structures used by ExternalEncoderControlTable V1.3
 // ASIC Families: Evergreen, Llano, NI
@@ -1793,6 +1943,7 @@ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2
 #define ATOM_PPLL_SS_TYPE_V3_P1PLL            0x00
 #define ATOM_PPLL_SS_TYPE_V3_P2PLL            0x04
 #define ATOM_PPLL_SS_TYPE_V3_DCPLL            0x08
+#define ATOM_PPLL_SS_TYPE_V3_P0PLL            ATOM_PPLL_SS_TYPE_V3_DCPLL
 #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK     0x00FF
 #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT    0
 #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK     0x0F00
@@ -2030,12 +2181,77 @@ typedef struct	_SET_VOLTAGE_PARAMETERS_V2
   USHORT   usVoltageLevel;              // real voltage level
 }SET_VOLTAGE_PARAMETERS_V2;
 
+
+typedef struct	_SET_VOLTAGE_PARAMETERS_V1_3
+{
+  UCHAR    ucVoltageType;               // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
+  UCHAR    ucVoltageMode;               // Indicate action: Set voltage level
+  USHORT   usVoltageLevel;              // real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. )
+}SET_VOLTAGE_PARAMETERS_V1_3;
+
+//ucVoltageType
+#define VOLTAGE_TYPE_VDDC                    1
+#define VOLTAGE_TYPE_MVDDC                   2
+#define VOLTAGE_TYPE_MVDDQ                   3
+#define VOLTAGE_TYPE_VDDCI                   4
+
+//SET_VOLTAGE_PARAMETERS_V3.ucVoltageMode
+#define ATOM_SET_VOLTAGE                     0        //Set voltage Level
+#define ATOM_INIT_VOLTAGE_REGULATOR          3        //Init Regulator
+#define ATOM_SET_VOLTAGE_PHASE               4        //Set Vregulator Phase
+#define ATOM_GET_MAX_VOLTAGE                 6        //Get Max Voltage, not used in SetVoltageTable v1.3
+#define ATOM_GET_VOLTAGE_LEVEL               6        //Get Voltage level from vitual voltage ID
+
+// define vitual voltage id in usVoltageLevel
+#define ATOM_VIRTUAL_VOLTAGE_ID0             0xff01
+#define ATOM_VIRTUAL_VOLTAGE_ID1             0xff02
+#define ATOM_VIRTUAL_VOLTAGE_ID2             0xff03
+#define ATOM_VIRTUAL_VOLTAGE_ID3             0xff04
+
 typedef struct _SET_VOLTAGE_PS_ALLOCATION
 {
   SET_VOLTAGE_PARAMETERS sASICSetVoltage;
   WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
 }SET_VOLTAGE_PS_ALLOCATION;
 
+// New Added from SI for GetVoltageInfoTable, input parameter structure
+typedef struct  _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1
+{
+  UCHAR    ucVoltageType;               // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
+  UCHAR    ucVoltageMode;               // Input: Indicate action: Get voltage info
+  USHORT   usVoltageLevel;              // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id 
+  ULONG    ulReserved;
+}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1;
+
+// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_VID
+typedef struct  _GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
+{
+  ULONG    ulVotlageGpioState;
+  ULONG    ulVoltageGPioMask;
+}GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
+
+// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_STATEx_LEAKAGE_VID
+typedef struct  _GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
+{
+  USHORT   usVoltageLevel;
+  USHORT   usVoltageId;                                  // Voltage Id programmed in Voltage Regulator
+  ULONG    ulReseved;
+}GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
+
+
+// GetVoltageInfo v1.1 ucVoltageMode
+#define	ATOM_GET_VOLTAGE_VID                0x00
+#define ATOM_GET_VOTLAGE_INIT_SEQ           0x03
+#define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID   0x04
+// for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state
+#define	ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10
+
+// for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state
+#define	ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11
+// undefined power state
+#define	ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12
+#define	ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13
+
 /****************************************************************************/	
 // Structures used by TVEncoderControlTable
 /****************************************************************************/	
@@ -2065,9 +2281,9 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
   USHORT        MultimediaConfigInfo;     // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios
   USHORT        StandardVESA_Timing;      // Only used by Bios
   USHORT        FirmwareInfo;             // Shared by various SW components,latest version 1.4
-  USHORT        DAC_Info;                 // Will be obsolete from R600
+  USHORT        PaletteData;              // Only used by BIOS
   USHORT        LCD_Info;                 // Shared by various SW components,latest version 1.3, was called LVDS_Info 
-  USHORT        TMDS_Info;                // Will be obsolete from R600
+  USHORT        DIGTransmitterInfo;       // Internal used by VBIOS only version 3.1
   USHORT        AnalogTV_Info;            // Shared by various SW components,latest version 1.1 
   USHORT        SupportedDevicesInfo;     // Will be obsolete from R600
   USHORT        GPIO_I2C_Info;            // Shared by various SW components,latest version 1.2 will be used from R600           
@@ -2096,15 +2312,16 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
 	USHORT				PowerSourceInfo;					// Shared by various SW components, latest versoin 1.1
 }ATOM_MASTER_LIST_OF_DATA_TABLES;
 
-// For backward compatible 
-#define LVDS_Info                LCD_Info
-
 typedef struct _ATOM_MASTER_DATA_TABLE
 { 
   ATOM_COMMON_TABLE_HEADER sHeader;  
   ATOM_MASTER_LIST_OF_DATA_TABLES   ListOfDataTables;
 }ATOM_MASTER_DATA_TABLE;
 
+// For backward compatible 
+#define LVDS_Info                LCD_Info
+#define DAC_Info                 PaletteData
+#define TMDS_Info                DIGTransmitterInfo
 
 /****************************************************************************/	
 // Structure used in MultimediaCapabilityInfoTable
@@ -2171,7 +2388,9 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
 typedef struct _ATOM_FIRMWARE_CAPABILITY
 {
 #if ATOM_BIG_ENDIAN
-  USHORT Reserved:3;
+  USHORT Reserved:1;
+  USHORT SCL2Redefined:1;
+  USHORT PostWithoutModeSet:1;
   USHORT HyperMemory_Size:4;
   USHORT HyperMemory_Support:1;
   USHORT PPMode_Assigned:1;
@@ -2193,7 +2412,9 @@ typedef struct _ATOM_FIRMWARE_CAPABILITY
   USHORT PPMode_Assigned:1;
   USHORT HyperMemory_Support:1;
   USHORT HyperMemory_Size:4;
-  USHORT Reserved:3;
+  USHORT PostWithoutModeSet:1;
+  USHORT SCL2Redefined:1;
+  USHORT Reserved:1;
 #endif
 }ATOM_FIRMWARE_CAPABILITY;
 
@@ -2418,7 +2639,8 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2
   USHORT                          usLcdMaxPixelClockPLL_Output; // In MHz unit
   ULONG                           ulReserved4;                //Was ulAsicMaximumVoltage
   ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
-  ULONG                           ulReserved5;                //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
+  UCHAR                           ucRemoteDisplayConfig;
+  UCHAR                           ucReserved5[3];             //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
   ULONG                           ulReserved6;                //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input
   ULONG                           ulReserved7;                //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output
   USHORT                          usReserved11;               //Was usMaxPixelClock;  //In 10Khz unit, Max.  Pclk used only for DAC
@@ -2438,6 +2660,11 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2
 
 #define ATOM_FIRMWARE_INFO_LAST  ATOM_FIRMWARE_INFO_V2_2
 
+
+// definition of ucRemoteDisplayConfig
+#define REMOTE_DISPLAY_DISABLE                   0x00
+#define REMOTE_DISPLAY_ENABLE                    0x01
+
 /****************************************************************************/	
 // Structures used in IntegratedSystemInfoTable
 /****************************************************************************/	
@@ -2660,8 +2887,9 @@ usMinDownStreamHTLinkWidth:  same as above.
 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND      2
 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__K8             3
 #define    INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH        4
+#define    INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI         5
 
-#define    INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE       INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH    // this deff reflects max defined CPU code
+#define    INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE       INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI    // this deff reflects max defined CPU code
 
 #define SYSTEM_CONFIG_POWEREXPRESS_ENABLE                 0x00000001
 #define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE             0x00000002
@@ -2753,6 +2981,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V5
 #define ASIC_INT_DIG4_ENCODER_ID													0x0b
 #define ASIC_INT_DIG5_ENCODER_ID													0x0c
 #define ASIC_INT_DIG6_ENCODER_ID													0x0d
+#define ASIC_INT_DIG7_ENCODER_ID													0x0e
 
 //define Encoder attribute
 #define ATOM_ANALOG_ENCODER																0
@@ -3226,15 +3455,23 @@ typedef struct _ATOM_LCD_INFO_V13
 
   UCHAR               ucPowerSequenceDIGONtoDE_in4Ms;
   UCHAR               ucPowerSequenceDEtoVARY_BL_in4Ms;
-  UCHAR               ucPowerSequenceDEtoDIGON_in4Ms;
   UCHAR               ucPowerSequenceVARY_BLtoDE_in4Ms;
+  UCHAR               ucPowerSequenceDEtoDIGON_in4Ms;
 
   UCHAR               ucOffDelay_in4Ms;
   UCHAR               ucPowerSequenceVARY_BLtoBLON_in4Ms;
   UCHAR               ucPowerSequenceBLONtoVARY_BL_in4Ms;
   UCHAR               ucReserved1;
 
-  ULONG               ulReserved[4];
+  UCHAR               ucDPCD_eDP_CONFIGURATION_CAP;     // dpcd 0dh
+  UCHAR               ucDPCD_MAX_LINK_RATE;             // dpcd 01h
+  UCHAR               ucDPCD_MAX_LANE_COUNT;            // dpcd 02h
+  UCHAR               ucDPCD_MAX_DOWNSPREAD;            // dpcd 03h
+
+  USHORT              usMaxPclkFreqInSingleLink;        // Max PixelClock frequency in single link mode. 
+  UCHAR               uceDPToLVDSRxId;
+  UCHAR               ucLcdReservd;
+  ULONG               ulReserved[2];
 }ATOM_LCD_INFO_V13;  
 
 #define ATOM_LCD_INFO_LAST  ATOM_LCD_INFO_V13    
@@ -3273,6 +3510,11 @@ typedef struct _ATOM_LCD_INFO_V13
 //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
 #define	LCDPANEL_CAP_V13_eDP                    0x4        // = LCDPANEL_CAP_eDP no change comparing to previous version
 
+//uceDPToLVDSRxId
+#define eDP_TO_LVDS_RX_DISABLE                  0x00       // no eDP->LVDS translator chip 
+#define eDP_TO_LVDS_COMMON_ID                   0x01       // common eDP->LVDS translator chip without AMD SW init
+#define eDP_TO_LVDS_RT_ID                       0x02       // RT tanslator which require AMD SW init
+
 typedef struct  _ATOM_PATCH_RECORD_MODE
 {
   UCHAR     ucRecordType;
@@ -3317,6 +3559,7 @@ typedef struct  _ATOM_PANEL_RESOLUTION_PATCH_RECORD
 #define LCD_CAP_RECORD_TYPE                   3
 #define LCD_FAKE_EDID_PATCH_RECORD_TYPE       4
 #define LCD_PANEL_RESOLUTION_RECORD_TYPE      5
+#define LCD_EDID_OFFSET_PATCH_RECORD_TYPE     6
 #define ATOM_RECORD_END_TYPE                  0xFF
 
 /****************************Spread Spectrum Info Table Definitions **********************/
@@ -3528,6 +3771,7 @@ else	//Non VGA case
 
 CAIL needs to claim an reserved area defined by FBAccessAreaOffset and usFBUsedbyDrvInKB in non VGA case.*/
 
+/***********************************************************************************/	
 #define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO			1
 
 typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO
@@ -3818,13 +4062,17 @@ typedef struct _EXT_DISPLAY_PATH
     ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping;
     ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping;
   };
-  UCHAR   ucReserved;
-  USHORT  usReserved[2]; 
+  UCHAR   ucChPNInvert;                   // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted
+  USHORT  usCaps;
+  USHORT  usReserved; 
 }EXT_DISPLAY_PATH;
    
 #define NUMBER_OF_UCHAR_FOR_GUID          16
 #define MAX_NUMBER_OF_EXT_DISPLAY_PATH    7
 
+//usCaps
+#define  EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE          0x01
+
 typedef  struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
 {
   ATOM_COMMON_TABLE_HEADER sHeader;
@@ -3832,7 +4080,9 @@ typedef  struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
   EXT_DISPLAY_PATH         sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries.
   UCHAR                    ucChecksum;                            // a  simple Checksum of the sum of whole structure equal to 0x0. 
   UCHAR                    uc3DStereoPinId;                       // use for eDP panel
-  UCHAR                    Reserved [6];                          // for potential expansion
+  UCHAR                    ucRemoteDisplayConfig;
+  UCHAR                    uceDPToLVDSRxId;
+  UCHAR                    Reserved[4];                           // for potential expansion
 }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
 
 //Related definitions, all records are different but they have a commond header
@@ -3977,6 +4227,7 @@ typedef struct  _ATOM_OBJECT_GPIO_CNTL_RECORD
 #define GPIO_PIN_STATE_ACTIVE_HIGH      0x1
 
 // Indexes to GPIO array in GLSync record 
+// GLSync record is for Frame Lock/Gen Lock feature.
 #define ATOM_GPIO_INDEX_GLSYNC_REFCLK    0
 #define ATOM_GPIO_INDEX_GLSYNC_HSYNC     1
 #define ATOM_GPIO_INDEX_GLSYNC_VSYNC     2
@@ -3984,7 +4235,9 @@ typedef struct  _ATOM_OBJECT_GPIO_CNTL_RECORD
 #define ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT  4
 #define ATOM_GPIO_INDEX_GLSYNC_INTERRUPT 5
 #define ATOM_GPIO_INDEX_GLSYNC_V_RESET   6
-#define ATOM_GPIO_INDEX_GLSYNC_MAX       7
+#define ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL 7
+#define ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL  8
+#define ATOM_GPIO_INDEX_GLSYNC_MAX       9
 
 typedef struct  _ATOM_ENCODER_DVO_CF_RECORD
 {
@@ -3994,7 +4247,8 @@ typedef struct  _ATOM_ENCODER_DVO_CF_RECORD
 }ATOM_ENCODER_DVO_CF_RECORD;
 
 // Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap
-#define ATOM_ENCODER_CAP_RECORD_HBR2     0x01         // DP1.2 HBR2 is supported by this path
+#define ATOM_ENCODER_CAP_RECORD_HBR2                  0x01         // DP1.2 HBR2 is supported by HW encoder
+#define ATOM_ENCODER_CAP_RECORD_HBR2_EN               0x02         // DP1.2 HBR2 setting is qualified and HBR2 can be enabled 
 
 typedef struct  _ATOM_ENCODER_CAP_RECORD
 {
@@ -4003,11 +4257,13 @@ typedef struct  _ATOM_ENCODER_CAP_RECORD
     USHORT                    usEncoderCap;         
     struct {
 #if ATOM_BIG_ENDIAN
-      USHORT                  usReserved:15;        // Bit1-15 may be defined for other capability in future
+      USHORT                  usReserved:14;        // Bit1-15 may be defined for other capability in future
+      USHORT                  usHBR2En:1;           // Bit1 is for DP1.2 HBR2 enable
       USHORT                  usHBR2Cap:1;          // Bit0 is for DP1.2 HBR2 capability. 
 #else
       USHORT                  usHBR2Cap:1;          // Bit0 is for DP1.2 HBR2 capability. 
-      USHORT                  usReserved:15;        // Bit1-15 may be defined for other capability in future
+      USHORT                  usHBR2En:1;           // Bit1 is for DP1.2 HBR2 enable
+      USHORT                  usReserved:14;        // Bit1-15 may be defined for other capability in future
 #endif
     };
   }; 
@@ -4157,6 +4413,7 @@ typedef struct _ATOM_VOLTAGE_CONTROL
 #define	VOLTAGE_CONTROL_ID_VT1556M						0x07									
 #define	VOLTAGE_CONTROL_ID_CHL822x						0x08									
 #define	VOLTAGE_CONTROL_ID_VT1586M						0x09
+#define VOLTAGE_CONTROL_ID_UP1637 						0x0A
 
 typedef struct  _ATOM_VOLTAGE_OBJECT
 {
@@ -4193,6 +4450,69 @@ typedef struct  _ATOM_LEAKID_VOLTAGE
 	USHORT	usVoltage;
 }ATOM_LEAKID_VOLTAGE;
 
+typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{
+ 	 UCHAR		ucVoltageType;									//Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI	 
+   UCHAR		ucVoltageMode;							    //Indicate voltage control mode: Init/Set/Leakage/Set phase 
+	 USHORT		usSize;													//Size of Object	
+}ATOM_VOLTAGE_OBJECT_HEADER_V3;
+
+typedef struct  _VOLTAGE_LUT_ENTRY_V2
+{
+	 ULONG		ulVoltageId;									  // The Voltage ID which is used to program GPIO register
+	 USHORT		usVoltageValue;									// The corresponding Voltage Value, in mV
+}VOLTAGE_LUT_ENTRY_V2;
+
+typedef struct  _LEAKAGE_VOLTAGE_LUT_ENTRY_V2
+{
+  USHORT	usVoltageLevel; 							  // The Voltage ID which is used to program GPIO register
+  USHORT  usVoltageId;                    
+	USHORT	usLeakageId;									  // The corresponding Voltage Value, in mV
+}LEAKAGE_VOLTAGE_LUT_ENTRY_V2;
+
+typedef struct  _ATOM_I2C_VOLTAGE_OBJECT_V3
+{
+   ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;
+   UCHAR	ucVoltageRegulatorId;					  //Indicate Voltage Regulator Id
+   UCHAR    ucVoltageControlI2cLine;
+   UCHAR    ucVoltageControlAddress;
+   UCHAR    ucVoltageControlOffset;	 	
+   ULONG    ulReserved;
+   VOLTAGE_LUT_ENTRY asVolI2cLut[1];        // end with 0xff
+}ATOM_I2C_VOLTAGE_OBJECT_V3;
+
+typedef struct  _ATOM_GPIO_VOLTAGE_OBJECT_V3
+{
+   ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;   
+   UCHAR    ucVoltageGpioCntlId;         // default is 0 which indicate control through CG VID mode 
+   UCHAR    ucGpioEntryNum;              // indiate the entry numbers of Votlage/Gpio value Look up table
+   UCHAR    ucPhaseDelay;                // phase delay in unit of micro second
+   UCHAR    ucReserved;   
+   ULONG    ulGpioMaskVal;               // GPIO Mask value
+   VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1];   
+}ATOM_GPIO_VOLTAGE_OBJECT_V3;
+
+typedef struct  _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+{
+   ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;
+   UCHAR    ucLeakageCntlId;             // default is 0
+   UCHAR    ucLeakageEntryNum;           // indicate the entry number of LeakageId/Voltage Lut table
+   UCHAR    ucReserved[2];               
+   ULONG    ulMaxVoltageLevel;
+   LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1];   
+}ATOM_LEAKAGE_VOLTAGE_OBJECT_V3;
+
+typedef union _ATOM_VOLTAGE_OBJECT_V3{
+  ATOM_GPIO_VOLTAGE_OBJECT_V3 asGpioVoltageObj;
+  ATOM_I2C_VOLTAGE_OBJECT_V3 asI2cVoltageObj;
+  ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 asLeakageObj;
+}ATOM_VOLTAGE_OBJECT_V3;
+
+typedef struct  _ATOM_VOLTAGE_OBJECT_INFO_V3_1
+{
+   ATOM_COMMON_TABLE_HEADER	sHeader; 
+	 ATOM_VOLTAGE_OBJECT_V3			asVoltageObj[3];	//Info for Voltage control	  	 
+}ATOM_VOLTAGE_OBJECT_INFO_V3_1;
+
 typedef struct  _ATOM_ASIC_PROFILE_VOLTAGE
 {
 	UCHAR		ucProfileId;
@@ -4305,7 +4625,18 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
   USHORT usHDMISSpreadRateIn10Hz;
   USHORT usDVISSPercentage;
   USHORT usDVISSpreadRateIn10Hz;
-  ULONG  ulReserved3[21]; 
+  ULONG  SclkDpmBoostMargin;
+  ULONG  SclkDpmThrottleMargin;
+  USHORT SclkDpmTdpLimitPG; 
+  USHORT SclkDpmTdpLimitBoost;
+  ULONG  ulBoostEngineCLock;
+  UCHAR  ulBoostVid_2bit;  
+  UCHAR  EnableBoost;
+  USHORT GnbTdpLimit;
+  USHORT usMaxLVDSPclkFreqInSingleLink;
+  UCHAR  ucLvdsMisc;
+  UCHAR  ucLVDSReserved;
+  ULONG  ulReserved3[15]; 
   ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;   
 }ATOM_INTEGRATED_SYSTEM_INFO_V6;   
 
@@ -4313,9 +4644,16 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE       0x01
 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION          0x08
 
-// ulOtherDisplayMisc
-#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT                       0x01
+//ucLVDSMisc:                   
+#define SYS_INFO_LVDSMISC__888_FPDI_MODE                                             0x01
+#define SYS_INFO_LVDSMISC__DL_CH_SWAP                                                0x02
+#define SYS_INFO_LVDSMISC__888_BPC                                                   0x04
+#define SYS_INFO_LVDSMISC__OVERRIDE_EN                                               0x08
+#define SYS_INFO_LVDSMISC__BLON_ACTIVE_LOW                                           0x10
 
+// not used any more
+#define SYS_INFO_LVDSMISC__VSYNC_ACTIVE_LOW                                          0x04
+#define SYS_INFO_LVDSMISC__HSYNC_ACTIVE_LOW                                          0x08
 
 /**********************************************************************************************************************
   ATOM_INTEGRATED_SYSTEM_INFO_V6 Description
@@ -4384,7 +4722,208 @@ ucUMAChannelNumber:      	        System memory channel numbers.
 ulCSR_M3_ARB_CNTL_DEFAULT[10]:    Arrays with values for CSR M3 arbiter for default
 ulCSR_M3_ARB_CNTL_UVD[10]:        Arrays with values for CSR M3 arbiter for UVD playback.
 ulCSR_M3_ARB_CNTL_FS3D[10]:       Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
-sAvail_SCLK[5]:                   Arrays to provide available list of SLCK and corresponding voltage, order from low to high  
+sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high  
+ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. 
+ulMinimumNClk:                    Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. 
+ulIdleNClk:                       NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
+ulDDR_DLL_PowerUpTime:            DDR PHY DLL power up time. Unit in ns.
+ulDDR_PLL_PowerUpTime:            DDR PHY PLL power up time. Unit in ns.
+usPCIEClkSSPercentage:            PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%.
+usPCIEClkSSType:                  PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread.
+usLvdsSSPercentage:               LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. 
+usLvdsSSpreadRateIn10Hz:          LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. 
+usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting. 
+usHDMISSpreadRateIn10Hz:          HDMI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting. 
+usDVISSPercentage:                DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting. 
+usDVISSpreadRateIn10Hz:           DVI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting. 
+usMaxLVDSPclkFreqInSingleLink:    Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
+ucLVDSMisc:                       [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
+                                  [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
+                                  [bit2] LVDS 888bit per color mode  =0: 666 bit per color =1:888 bit per color
+                                  [bit3] LVDS parameter override enable  =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
+                                  [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
+**********************************************************************************************************************/
+
+// this Table is used for Liano/Ontario APU
+typedef struct _ATOM_FUSION_SYSTEM_INFO_V1
+{
+  ATOM_INTEGRATED_SYSTEM_INFO_V6    sIntegratedSysInfo;   
+  ULONG  ulPowerplayTable[128];  
+}ATOM_FUSION_SYSTEM_INFO_V1; 
+/**********************************************************************************************************************
+  ATOM_FUSION_SYSTEM_INFO_V1 Description
+sIntegratedSysInfo:               refer to ATOM_INTEGRATED_SYSTEM_INFO_V6 definition.
+ulPowerplayTable[128]:            This 512 bytes memory is used to save ATOM_PPLIB_POWERPLAYTABLE3, starting form ulPowerplayTable[0]    
+**********************************************************************************************************************/ 
+
+// this IntegrateSystemInfoTable is used for Trinity APU
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7
+{
+  ATOM_COMMON_TABLE_HEADER   sHeader;
+  ULONG  ulBootUpEngineClock;
+  ULONG  ulDentistVCOFreq;
+  ULONG  ulBootUpUMAClock;
+  ATOM_CLK_VOLT_CAPABILITY   sDISPCLK_Voltage[4];
+  ULONG  ulBootUpReqDisplayVector;
+  ULONG  ulOtherDisplayMisc;
+  ULONG  ulGPUCapInfo;
+  ULONG  ulSB_MMIO_Base_Addr;
+  USHORT usRequestedPWMFreqInHz;
+  UCHAR  ucHtcTmpLmt;
+  UCHAR  ucHtcHystLmt;
+  ULONG  ulMinEngineClock;
+  ULONG  ulSystemConfig;            
+  ULONG  ulCPUCapInfo;
+  USHORT usNBP0Voltage;               
+  USHORT usNBP1Voltage;
+  USHORT usBootUpNBVoltage;                       
+  USHORT usExtDispConnInfoOffset;
+  USHORT usPanelRefreshRateRange;     
+  UCHAR  ucMemoryType;  
+  UCHAR  ucUMAChannelNumber;
+  UCHAR  strVBIOSMsg[40];
+  ULONG  ulReserved[20];
+  ATOM_AVAILABLE_SCLK_LIST   sAvail_SCLK[5];
+  ULONG  ulGMCRestoreResetTime;
+  ULONG  ulMinimumNClk;
+  ULONG  ulIdleNClk;
+  ULONG  ulDDR_DLL_PowerUpTime;
+  ULONG  ulDDR_PLL_PowerUpTime;
+  USHORT usPCIEClkSSPercentage;
+  USHORT usPCIEClkSSType;
+  USHORT usLvdsSSPercentage;
+  USHORT usLvdsSSpreadRateIn10Hz;
+  USHORT usHDMISSPercentage;
+  USHORT usHDMISSpreadRateIn10Hz;
+  USHORT usDVISSPercentage;
+  USHORT usDVISSpreadRateIn10Hz;
+  ULONG  SclkDpmBoostMargin;
+  ULONG  SclkDpmThrottleMargin;
+  USHORT SclkDpmTdpLimitPG; 
+  USHORT SclkDpmTdpLimitBoost;
+  ULONG  ulBoostEngineCLock;
+  UCHAR  ulBoostVid_2bit;  
+  UCHAR  EnableBoost;
+  USHORT GnbTdpLimit;
+  USHORT usMaxLVDSPclkFreqInSingleLink;
+  UCHAR  ucLvdsMisc;
+  UCHAR  ucLVDSReserved;
+  UCHAR  ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
+  UCHAR  ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
+  UCHAR  ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
+  UCHAR  ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
+  UCHAR  ucLVDSOffToOnDelay_in4Ms;
+  UCHAR  ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
+  UCHAR  ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
+  UCHAR  ucLVDSReserved1;
+  ULONG  ulLCDBitDepthControlVal;
+  ULONG  ulNbpStateMemclkFreq[4];
+  USHORT usNBP2Voltage;               
+  USHORT usNBP3Voltage;
+  ULONG  ulNbpStateNClkFreq[4];
+  UCHAR  ucNBDPMEnable;
+  UCHAR  ucReserved[3];
+  UCHAR  ucDPMState0VclkFid;
+  UCHAR  ucDPMState0DclkFid;
+  UCHAR  ucDPMState1VclkFid;
+  UCHAR  ucDPMState1DclkFid;
+  UCHAR  ucDPMState2VclkFid;
+  UCHAR  ucDPMState2DclkFid;
+  UCHAR  ucDPMState3VclkFid;
+  UCHAR  ucDPMState3DclkFid;
+  ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
+}ATOM_INTEGRATED_SYSTEM_INFO_V1_7;
+
+// ulOtherDisplayMisc
+#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT            0x01
+#define INTEGRATED_SYSTEM_INFO__GET_BOOTUP_DISPLAY_CALLBACK_FUNC_SUPPORT  0x02
+#define INTEGRATED_SYSTEM_INFO__GET_EXPANSION_CALLBACK_FUNC_SUPPORT       0x04
+#define INTEGRATED_SYSTEM_INFO__FAST_BOOT_SUPPORT                         0x08
+
+// ulGPUCapInfo
+#define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE                0x01
+#define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE                               0x02
+#define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT                         0x08
+
+/**********************************************************************************************************************
+  ATOM_INTEGRATED_SYSTEM_INFO_V1_7 Description
+ulBootUpEngineClock:              VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
+ulDentistVCOFreq:                 Dentist VCO clock in 10kHz unit. 
+ulBootUpUMAClock:                 System memory boot up clock frequency in 10Khz unit. 
+sDISPCLK_Voltage:                 Report Display clock voltage requirement.
+ 
+ulBootUpReqDisplayVector:         VBIOS boot up display IDs, following are supported devices in Trinity projects:
+                                  ATOM_DEVICE_CRT1_SUPPORT                  0x0001
+                                  ATOM_DEVICE_DFP1_SUPPORT                  0x0008 
+                                  ATOM_DEVICE_DFP6_SUPPORT                  0x0040 
+                                  ATOM_DEVICE_DFP2_SUPPORT                  0x0080       
+                                  ATOM_DEVICE_DFP3_SUPPORT                  0x0200       
+                                  ATOM_DEVICE_DFP4_SUPPORT                  0x0400        
+                                  ATOM_DEVICE_DFP5_SUPPORT                  0x0800
+                                  ATOM_DEVICE_LCD1_SUPPORT                  0x0002
+ulOtherDisplayMisc:      	        bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS. 
+                                        =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS. 
+                                  bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS
+                                        =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS
+                                  bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS
+                                        =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS
+                                  bit[3]=0: VBIOS fast boot is disable
+                                        =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open)
+ulGPUCapInfo:                     bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode.
+                                        =1: TMDS/HDMI Coherent Mode use signel PLL mode.
+                                  bit[1]=0: DP mode use cascade PLL mode ( New for Trinity )
+                                        =1: DP mode use single PLL mode
+                                  bit[3]=0: Enable AUX HW mode detection logic
+                                        =1: Disable AUX HW mode detection logic
+                                      
+ulSB_MMIO_Base_Addr:              Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage.
+
+usRequestedPWMFreqInHz:           When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). 
+                                  Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
+                                  
+                                  When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
+                                  1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
+                                  VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
+                                  Changing BL using VBIOS function is functional in both driver and non-driver present environment; 
+                                  and enabling VariBri under the driver environment from PP table is optional.
+
+                                  2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
+                                  that BL control from GPU is expected.
+                                  VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
+                                  Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
+                                  it's per platform 
+                                  and enabling VariBri under the driver environment from PP table is optional.
+
+ucHtcTmpLmt:                      Refer to D18F3x64 bit[22:16], HtcTmpLmt. 
+                                  Threshold on value to enter HTC_active state.
+ucHtcHystLmt:                     Refer to D18F3x64 bit[27:24], HtcHystLmt. 
+                                  To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
+ulMinEngineClock:                 Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings.
+ulSystemConfig:                   Bit[0]=0: PCIE Power Gating Disabled 
+                                        =1: PCIE Power Gating Enabled
+                                  Bit[1]=0: DDR-DLL shut-down feature disabled.
+                                         1: DDR-DLL shut-down feature enabled.
+                                  Bit[2]=0: DDR-PLL Power down feature disabled.
+                                         1: DDR-PLL Power down feature enabled.                                 
+ulCPUCapInfo:                     TBD
+usNBP0Voltage:                    VID for voltage on NB P0 State
+usNBP1Voltage:                    VID for voltage on NB P1 State  
+usNBP2Voltage:                    VID for voltage on NB P2 State
+usNBP3Voltage:                    VID for voltage on NB P3 State  
+usBootUpNBVoltage:                Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement.
+usExtDispConnInfoOffset:          Offset to sExtDispConnInfo inside the structure
+usPanelRefreshRateRange:          Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
+                                  to indicate a range.
+                                  SUPPORTED_LCD_REFRESHRATE_30Hz          0x0004
+                                  SUPPORTED_LCD_REFRESHRATE_40Hz          0x0008
+                                  SUPPORTED_LCD_REFRESHRATE_50Hz          0x0010
+                                  SUPPORTED_LCD_REFRESHRATE_60Hz          0x0020
+ucMemoryType:                     [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
+ucUMAChannelNumber:      	        System memory channel numbers. 
+ulCSR_M3_ARB_CNTL_DEFAULT[10]:    Arrays with values for CSR M3 arbiter for default
+ulCSR_M3_ARB_CNTL_UVD[10]:        Arrays with values for CSR M3 arbiter for UVD playback.
+ulCSR_M3_ARB_CNTL_FS3D[10]:       Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
+sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high  
 ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. 
 ulMinimumNClk:                    Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. 
 ulIdleNClk:                       NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
@@ -4398,6 +4937,41 @@ usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%;
 usHDMISSpreadRateIn10Hz:          HDMI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting. 
 usDVISSPercentage:                DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting. 
 usDVISSpreadRateIn10Hz:           DVI Spread Spectrum frequency in unit of 10Hz,  =0, use VBIOS default setting. 
+usMaxLVDSPclkFreqInSingleLink:    Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
+ucLVDSMisc:                       [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
+                                  [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
+                                  [bit2] LVDS 888bit per color mode  =0: 666 bit per color =1:888 bit per color
+                                  [bit3] LVDS parameter override enable  =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
+                                  [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
+ucLVDSPwrOnSeqDIGONtoDE_in4Ms:    LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ).
+                                  =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. 
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOnDEtoVARY_BL_in4Ms:     LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ).  
+                                  =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. 
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffVARY_BLtoDE_in4Ms:    LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off. 
+                                  =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffDEtoDIGON_in4Ms:      LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off. 
+                                  =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSOffToOnDelay_in4Ms:         LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active. 
+                                  =0 means to use VBIOS default delay which is 125 ( 500ms ).
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOnVARY_BLtoBLON_in4Ms:   LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active. 
+                                  =0 means to use VBIOS default delay which is 0 ( 0ms ).
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffBLONtoVARY_BL_in4Ms:  LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off. 
+                                  =0 means to use VBIOS default delay which is 0 ( 0ms ).
+                                  This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ulNbpStateMemclkFreq[4]:          system memory clock frequncey in unit of 10Khz in different NB pstate. 
+
 **********************************************************************************************************************/
 
 /**************************************************************************/
@@ -4459,6 +5033,7 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT
 #define ASIC_INTERNAL_SS_ON_DP      7
 #define ASIC_INTERNAL_SS_ON_DCPLL   8
 #define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9
+#define ASIC_INTERNAL_VCE_SS        10
 
 typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2
 {
@@ -4520,7 +5095,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_DOS_MODE_INFO_DEF        7
 #define ATOM_I2C_CHANNEL_STATUS_DEF   8
 #define ATOM_I2C_CHANNEL_STATUS1_DEF  9
-
+#define ATOM_INTERNAL_TIMER_DEF       10
 
 // BIOS_0_SCRATCH Definition 
 #define ATOM_S0_CRT1_MONO               0x00000001L
@@ -4648,6 +5223,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S2_DEVICE_DPMS_MASKw1      0x3FF
 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3     0x0C
 #define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3   0x10
+#define ATOM_S2_TMDS_COHERENT_MODEb3    0x10          // used by VBIOS code only, use coherent mode for TMDS/HDMI mode
 #define ATOM_S2_VRI_BRIGHT_ENABLEb3     0x20
 #define ATOM_S2_ROTATION_STATE_MASKb3   0xC0
 
@@ -5038,6 +5614,23 @@ typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3
   USHORT usDeviceId;                  // Active Device Id for this surface. If no device, set to 0. 
 }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3;
 
+typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4
+{
+  USHORT usHight;                     // Image Hight
+  USHORT usWidth;                     // Image Width
+  USHORT usGraphPitch;
+  UCHAR  ucColorDepth;
+  UCHAR  ucPixelFormat;
+  UCHAR  ucSurface;                   // Surface 1 or 2
+  UCHAR  ucEnable;                    // ATOM_ENABLE or ATOM_DISABLE
+  UCHAR  ucModeType;
+  UCHAR  ucReserved;
+}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4;
+
+// ucEnable
+#define ATOM_GRAPH_CONTROL_SET_PITCH             0x0f
+#define ATOM_GRAPH_CONTROL_SET_DISP_START        0x10
+
 typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION
 {
   ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface;          
@@ -5057,6 +5650,58 @@ typedef struct  _GET_DISPLAY_SURFACE_SIZE_PARAMETERS
   USHORT  usY_Size;
 }GET_DISPLAY_SURFACE_SIZE_PARAMETERS; 
 
+typedef struct  _GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2
+{
+  union{
+    USHORT  usX_Size;                     //When use as input parameter, usX_Size indicates which CRTC                 
+    USHORT  usSurface; 
+  };
+  USHORT usY_Size;
+  USHORT usDispXStart;               
+  USHORT usDispYStart;
+}GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2; 
+
+
+typedef struct _PALETTE_DATA_CONTROL_PARAMETERS_V3 
+{
+  UCHAR  ucLutId;
+  UCHAR  ucAction;
+  USHORT usLutStartIndex;
+  USHORT usLutLength;
+  USHORT usLutOffsetInVram;
+}PALETTE_DATA_CONTROL_PARAMETERS_V3;
+
+// ucAction:
+#define PALETTE_DATA_AUTO_FILL            1
+#define PALETTE_DATA_READ                 2
+#define PALETTE_DATA_WRITE                3
+
+
+typedef struct _INTERRUPT_SERVICE_PARAMETERS_V2
+{
+  UCHAR  ucInterruptId;
+  UCHAR  ucServiceId;
+  UCHAR  ucStatus;
+  UCHAR  ucReserved;
+}INTERRUPT_SERVICE_PARAMETER_V2;
+
+// ucInterruptId
+#define HDP1_INTERRUPT_ID                 1
+#define HDP2_INTERRUPT_ID                 2
+#define HDP3_INTERRUPT_ID                 3
+#define HDP4_INTERRUPT_ID                 4
+#define HDP5_INTERRUPT_ID                 5
+#define HDP6_INTERRUPT_ID                 6
+#define SW_INTERRUPT_ID                   11   
+
+// ucAction
+#define INTERRUPT_SERVICE_GEN_SW_INT      1
+#define INTERRUPT_SERVICE_GET_STATUS      2
+
+ // ucStatus
+#define INTERRUPT_STATUS__INT_TRIGGER     1
+#define INTERRUPT_STATUS__HPD_HIGH        2
+
 typedef struct _INDIRECT_IO_ACCESS
 {
   ATOM_COMMON_TABLE_HEADER sHeader;  
@@ -5189,7 +5834,7 @@ typedef struct _ATOM_INIT_REG_BLOCK{
 
 #define END_OF_REG_INDEX_BLOCK  0x0ffff
 #define END_OF_REG_DATA_BLOCK   0x00000000
-#define ATOM_INIT_REG_MASK_FLAG 0x80
+#define ATOM_INIT_REG_MASK_FLAG 0x80               //Not used in BIOS
 #define	CLOCK_RANGE_HIGHEST			0x00ffffff
 
 #define VALUE_DWORD             SIZEOF ULONG
@@ -5229,6 +5874,7 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE
 #define _128Mx8             0x51
 #define _128Mx16            0x52
 #define _256Mx8             0x61
+#define _256Mx16            0x62
 
 #define SAMSUNG             0x1
 #define INFINEON            0x2
@@ -5585,7 +6231,7 @@ typedef struct _ATOM_VRAM_MODULE_V7
   ULONG	  ulChannelMapCfg;	                // mmMC_SHARED_CHREMAP
   USHORT  usModuleSize;                     // Size of ATOM_VRAM_MODULE_V7
   USHORT  usPrivateReserved;                // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
-  USHORT  usReserved;
+  USHORT  usEnableChannels;                 // bit vector which indicate which channels are enabled
   UCHAR   ucExtMemoryID;                    // Current memory module ID
   UCHAR   ucMemoryType;                     // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5
   UCHAR   ucChannelNum;                     // Number of mem. channels supported in this module
@@ -5597,7 +6243,8 @@ typedef struct _ATOM_VRAM_MODULE_V7
   UCHAR   ucNPL_RT;                         // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2.
   UCHAR	  ucPreamble;                       // [7:4] Write Preamble, [3:0] Read Preamble
   UCHAR   ucMemorySize;                     // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
-  UCHAR   ucReserved[3];
+  USHORT  usSEQSettingOffset;
+  UCHAR   ucReserved;
 // Memory Module specific values
   USHORT  usEMRS2Value;                     // EMRS2/MR2 Value. 
   USHORT  usEMRS3Value;                     // EMRS3/MR3 Value.
@@ -5633,10 +6280,10 @@ typedef struct _ATOM_VRAM_INFO_V3
 typedef struct _ATOM_VRAM_INFO_V4
 {
   ATOM_COMMON_TABLE_HEADER   sHeader;
-	USHORT										 usMemAdjustTblOffset;													 // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
-	USHORT										 usMemClkPatchTblOffset;												 //	offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
-	USHORT										 usRerseved;
-	UCHAR           	         ucMemDQ7_0ByteRemap;													   // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
+  USHORT                     usMemAdjustTblOffset;													 // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
+  USHORT                     usMemClkPatchTblOffset;												 //	offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
+  USHORT										 usRerseved;
+  UCHAR           	         ucMemDQ7_0ByteRemap;													   // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
   ULONG                      ulMemDQ7_0BitRemap;                             // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21]
   UCHAR                      ucReservde[4]; 
   UCHAR                      ucNumOfVRAMModule;
@@ -5648,9 +6295,10 @@ typedef struct _ATOM_VRAM_INFO_V4
 typedef struct _ATOM_VRAM_INFO_HEADER_V2_1
 {
   ATOM_COMMON_TABLE_HEADER   sHeader;
-	USHORT										 usMemAdjustTblOffset;													 // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
-	USHORT										 usMemClkPatchTblOffset;												 //	offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
-	USHORT										 usReserved[4];
+  USHORT                     usMemAdjustTblOffset;													 // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
+  USHORT                     usMemClkPatchTblOffset;												 //	offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
+  USHORT                     usPerBytePresetOffset;                          // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings
+  USHORT                     usReserved[3];
   UCHAR                      ucNumOfVRAMModule;                              // indicate number of VRAM module
   UCHAR                      ucMemoryClkPatchTblVer;                         // version of memory AC timing register list
   UCHAR                      ucVramModuleVer;                                // indicate ATOM_VRAM_MODUE version
@@ -5935,6 +6583,52 @@ typedef struct _ATOM_DISP_OUT_INFO_V2
 	ASIC_ENCODER_INFO      asEncoderInfo[1];
 }ATOM_DISP_OUT_INFO_V2;
 
+
+typedef struct _ATOM_DISP_CLOCK_ID {
+  UCHAR ucPpllId; 
+  UCHAR ucPpllAttribute;
+}ATOM_DISP_CLOCK_ID;
+
+// ucPpllAttribute
+#define CLOCK_SOURCE_SHAREABLE            0x01
+#define CLOCK_SOURCE_DP_MODE              0x02
+#define CLOCK_SOURCE_NONE_DP_MODE         0x04
+
+//DispOutInfoTable
+typedef struct _ASIC_TRANSMITTER_INFO_V2
+{
+	USHORT usTransmitterObjId;
+	USHORT usDispClkIdOffset;    // point to clock source id list supported by Encoder Object
+  UCHAR  ucTransmitterCmdTblId;
+	UCHAR  ucConfig;
+	UCHAR  ucEncoderID;					 // available 1st encoder ( default )
+	UCHAR  ucOptionEncoderID;    // available 2nd encoder ( optional )
+	UCHAR  uc2ndEncoderID;
+	UCHAR  ucReserved;
+}ASIC_TRANSMITTER_INFO_V2;
+
+typedef struct _ATOM_DISP_OUT_INFO_V3
+{
+  ATOM_COMMON_TABLE_HEADER sHeader;  
+	USHORT ptrTransmitterInfo;
+	USHORT ptrEncoderInfo;
+  USHORT ptrMainCallParserFar;                  // direct address of main parser call in VBIOS binary. 
+  USHORT usReserved;
+  UCHAR  ucDCERevision;   
+  UCHAR  ucMaxDispEngineNum;
+  UCHAR  ucMaxActiveDispEngineNum;
+  UCHAR  ucMaxPPLLNum;
+  UCHAR  ucCoreRefClkSource;                          // value of CORE_REF_CLK_SOURCE
+  UCHAR  ucReserved[3];
+	ASIC_TRANSMITTER_INFO_V2  asTransmitterInfo[1];     // for alligment only
+}ATOM_DISP_OUT_INFO_V3;
+
+typedef enum CORE_REF_CLK_SOURCE{
+  CLOCK_SRC_XTALIN=0,
+  CLOCK_SRC_XO_IN=1,
+  CLOCK_SRC_XO_IN2=2,
+}CORE_REF_CLK_SOURCE;
+
 // DispDevicePriorityInfo
 typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO
 {
@@ -6070,6 +6764,39 @@ typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
 #define HW_I2C_READ         0
 #define I2C_2BYTE_ADDR      0x02
 
+/****************************************************************************/	
+// Structures used by HW_Misc_OperationTable
+/****************************************************************************/	
+typedef struct  _ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 
+{
+  UCHAR  ucCmd;                //  Input: To tell which action to take
+  UCHAR  ucReserved[3];
+  ULONG  ulReserved;
+}ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1; 
+
+typedef struct  _ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1 
+{
+  UCHAR  ucReturnCode;        // Output: Return value base on action was taken
+  UCHAR  ucReserved[3];
+  ULONG  ulReserved;
+}ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1;
+
+// Actions code
+#define  ATOM_GET_SDI_SUPPORT              0xF0
+
+// Return code 
+#define  ATOM_UNKNOWN_CMD                   0
+#define  ATOM_FEATURE_NOT_SUPPORTED         1
+#define  ATOM_FEATURE_SUPPORTED             2
+
+typedef struct _ATOM_HW_MISC_OPERATION_PS_ALLOCATION
+{
+	ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1        sInput_Output;
+	PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS         sReserved; 
+}ATOM_HW_MISC_OPERATION_PS_ALLOCATION;
+
+/****************************************************************************/	
+
 typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2
 {
    UCHAR ucHWBlkInst;                // HW block instance, 0, 1, 2, ...
@@ -6090,6 +6817,52 @@ typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2
 #define SELECT_CRTC_PIXEL_RATE        7
 #define SELECT_VGA_BLK                8
 
+// DIGTransmitterInfoTable structure used to program UNIPHY settings 
+typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_1{  
+  ATOM_COMMON_TABLE_HEADER sHeader;  
+  USHORT usDPVsPreEmphSettingOffset;     // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock 
+  USHORT usPhyAnalogRegListOffset;       // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info 
+  USHORT usPhyAnalogSettingOffset;       // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
+  USHORT usPhyPllRegListOffset;          // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info 
+  USHORT usPhyPllSettingOffset;          // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
+}DIG_TRANSMITTER_INFO_HEADER_V3_1;
+
+typedef struct _CLOCK_CONDITION_REGESTER_INFO{
+  USHORT usRegisterIndex;
+  UCHAR  ucStartBit;
+  UCHAR  ucEndBit;
+}CLOCK_CONDITION_REGESTER_INFO;
+
+typedef struct _CLOCK_CONDITION_SETTING_ENTRY{
+  USHORT usMaxClockFreq;
+  UCHAR  ucEncodeMode;
+  UCHAR  ucPhySel;
+  ULONG  ulAnalogSetting[1];
+}CLOCK_CONDITION_SETTING_ENTRY;
+
+typedef struct _CLOCK_CONDITION_SETTING_INFO{
+  USHORT usEntrySize;
+  CLOCK_CONDITION_SETTING_ENTRY asClkCondSettingEntry[1];
+}CLOCK_CONDITION_SETTING_INFO;
+
+typedef struct _PHY_CONDITION_REG_VAL{
+  ULONG  ulCondition;
+  ULONG  ulRegVal;
+}PHY_CONDITION_REG_VAL;
+
+typedef struct _PHY_CONDITION_REG_INFO{
+  USHORT usRegIndex;
+  USHORT usSize;
+  PHY_CONDITION_REG_VAL asRegVal[1];
+}PHY_CONDITION_REG_INFO;
+
+typedef struct _PHY_ANALOG_SETTING_INFO{
+  UCHAR  ucEncodeMode;
+  UCHAR  ucPhySel;
+  USHORT usSize;
+  PHY_CONDITION_REG_INFO  asAnalogSetting[1];
+}PHY_ANALOG_SETTING_INFO;
+
 /****************************************************************************/	
 //Portion VI: Definitinos for vbios MC scratch registers that driver used
 /****************************************************************************/
@@ -7020,4 +7793,68 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table
 
 #pragma pack() // BIOS data must use byte aligment
 
+//
+// AMD ACPI Table
+//
+#pragma pack(1)
+
+typedef struct {
+  ULONG Signature;
+  ULONG TableLength;      //Length
+  UCHAR Revision;
+  UCHAR Checksum;
+  UCHAR OemId[6];
+  UCHAR OemTableId[8];    //UINT64  OemTableId;
+  ULONG OemRevision;
+  ULONG CreatorId;
+  ULONG CreatorRevision;
+} AMD_ACPI_DESCRIPTION_HEADER;
+/*
+//EFI_ACPI_DESCRIPTION_HEADER from AcpiCommon.h
+typedef struct {
+  UINT32  Signature;       //0x0
+  UINT32  Length;          //0x4
+  UINT8   Revision;        //0x8
+  UINT8   Checksum;        //0x9
+  UINT8   OemId[6];        //0xA
+  UINT64  OemTableId;      //0x10
+  UINT32  OemRevision;     //0x18
+  UINT32  CreatorId;       //0x1C
+  UINT32  CreatorRevision; //0x20
+}EFI_ACPI_DESCRIPTION_HEADER;
+*/
+typedef struct {
+  AMD_ACPI_DESCRIPTION_HEADER SHeader;
+  UCHAR TableUUID[16];    //0x24
+  ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture.
+  ULONG Lib1ImageOffset;  //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture.
+  ULONG Reserved[4];      //0x3C
+}UEFI_ACPI_VFCT;
+
+typedef struct {
+  ULONG  PCIBus;          //0x4C
+  ULONG  PCIDevice;       //0x50
+  ULONG  PCIFunction;     //0x54
+  USHORT VendorID;        //0x58
+  USHORT DeviceID;        //0x5A
+  USHORT SSVID;           //0x5C
+  USHORT SSID;            //0x5E
+  ULONG  Revision;        //0x60
+  ULONG  ImageLength;     //0x64
+}VFCT_IMAGE_HEADER;
+
+
+typedef struct {
+  VFCT_IMAGE_HEADER	VbiosHeader;
+  UCHAR	VbiosContent[1];
+}GOP_VBIOS_CONTENT;
+
+typedef struct {
+  VFCT_IMAGE_HEADER	Lib1Header;
+  UCHAR	Lib1Content[1];
+}GOP_LIB1_CONTENT;
+
+#pragma pack()
+
+
 #endif /* _ATOMBIOS_H */
-- 
1.7.7.5

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux