From: "james qian wang (Arm Technology China)" <james.qian.wang@xxxxxxx>
Add DT bindings documentation for the ARM display processor D71 and later
IPs.
Changes in v4:
- Deleted unnecessary address-cells, size-cells [Liviu Dudau]
Changes in v3:
- Deleted unnecessary property: interrupt-names.
- Dropped 'ports' and moving 'port' up a level.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@xxxxxxx>
Reviewed-by: Liviu Dudau <liviu.dudau@xxxxxxx>
---
.../bindings/display/arm/arm,komeda.txt | 73 +++++++++++++++++++
1 file changed, 73 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/arm/arm,komeda.txt
diff --git a/Documentation/devicetree/bindings/display/arm/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm/arm,komeda.txt
new file mode 100644
index 000000000000..919d651d3e8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm/arm,komeda.txt
@@ -0,0 +1,73 @@
+Device Tree bindings for Arm Komeda display driver
+
+Required properties:
+- compatible: Should be "arm,mali-d71"
+- reg: Physical base address and length of the registers in the system
+- interrupts: the interrupt line number of the device in the system
+- clocks: A list of phandle + clock-specifier pairs, one for each entry
+ in 'clock-names'
+- clock-names: A list of clock names. It should contain:
+ - "mclk": for the main processor clock
+ - "pclk": for the APB interface clock
+- #address-cells: Must be 1
+- #size-cells: Must be 0
+
+Required properties for sub-node: pipeline@nq
+Each device contains one or two pipeline sub-nodes (at least one), each
+pipeline node should provide properties:
+- reg: Zero-indexed identifier for the pipeline
+- clocks: A list of phandle + clock-specifier pairs, one for each entry
+ in 'clock-names'
+- clock-names: should contain:
+ - "pxclk": pixel clock
+ - "aclk": AXI interface clock
+
+- port: each pipeline connect to an encoder input port. The connection is
+ modeled using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt
+
+Optional properties:
+ - memory-region: phandle to a node describing memory (see
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+ to be used for the framebuffer; if not present, the framebuffer may
+ be located anywhere in memory.
+
+Example:
+/ {
+ ...
+
+ dp0: display@c00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,mali-d71";
+ reg = <0xc00000 0x20000>;
+ interrupts = <0 168 4>;
+ clocks = <&dpu_mclk>, <&dpu_aclk>;
+ clock-names = "mclk", "pclk";
+
+ dp0_pipe0: pipeline@0 {
+ clocks = <&fpgaosc2>, <&dpu_aclk>;
+ clock-names = "pxclk", "aclk";
+ reg = <0>;
+
+ port@0 {
+ dp0_pipe0_out: endpoint {
+ remote-endpoint = <&db_dvi0_in>;
+ };
+ };
+ };
+
+ dp0_pipe1: pipeline@1 {
+ clocks = <&fpgaosc2>, <&dpu_aclk>;
+ clock-names = "pxclk", "aclk";
+ reg = <1>;
+
+ port@0 {
+ dp0_pipe1_out: endpoint {
+ remote-endpoint = <&db_dvi1_in>;
+ };
+ };
+ };
+ };
+ ...
+};
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
