Hi Johan, Am Samstag, 29. Dezember 2018, 14:33:14 CET schrieb Johan Jonker: > From: Mark Yao <mark.yao@xxxxxxxxxxxxxx> > > This patch adds the rk3066 VOP definitions. > > The VOP or LCD Controller serves as interface between > framebuffer memory and a display device (LCD panel or TV set). > > This SOC has two symmetrical LCDC's for a dual panel application. > > A LCDC has 5 display layers. > Only 3 are used here. > > - Video layer 0 (Win0) > - Video layer 1 (Win1) > - OSD layer (Win2) Patch itself looks good, we'll need to wait a bit to give Rob a chance to look at the (simple) dt-binding change and I'll drop the paragraph about the display layers when applying. Looking at the rk3066-manual, the lcdcs really only have 3 fully usable layers + the special cursor layer which is right now not really usable in a drm context, so the above paragraph is misleading, so I'll just drop it. Heiko > Win0 and Win1 are exchangeable. > Maximum resolution is 1920x1080. > > The LCDC0 output is connected to: > - LCDC0 IO (without IOMUX) > - HDMI TX video input > > The LCDC1 output is connected to: > - LCDC1 IO (with IOMUX) > - HDMI TX video input > > The HDMI TX input can switch between LCDC0 and LCDC1. > > Signed-off-by: Mark Yao <mark.yao@xxxxxxxxxxxxxx> > Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx> _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
