On Thu, Dec 27, 2018 at 4:54 PM Peter Rosin <peda@xxxxxxxxxx> wrote: > > On 2018-12-27 22:27, Rob Herring wrote: > > On Wed, Dec 19, 2018 at 02:04:47PM +0100, Peter Rosin wrote: > >> From: Peter Rosin <peda@xxxxxxxxxx> > >> > >> DS90C185 has a shutdown pin which does not fit in the lvds-transmitter > >> binding, which is meant to be generic. > >> > >> The sister chip DS90C187 is similar to DS90C185, describe it here as well. > >> > >> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx> > >> --- > >> .../bindings/display/bridge/lvds-transmitter.txt | 8 +--- > >> .../bindings/display/bridge/ti,ds90c185.txt | 55 ++++++++++++++++++++++ > >> 2 files changed, 56 insertions(+), 7 deletions(-) > >> create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt > >> > >> diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt > >> index 50220190c203..fd39ad34c383 100644 > >> --- a/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt > >> +++ b/Documentation/devicetree/bindings/display/bridge/lvds-transmitter.txt > >> @@ -22,13 +22,7 @@ among others. > >> > >> Required properties: > >> > >> -- compatible: Must be one or more of the following > >> - - "ti,ds90c185" for the TI DS90C185 FPD-Link Serializer > >> - - "lvds-encoder" for a generic LVDS encoder device > >> - > >> - When compatible with the generic version, nodes must list the > >> - device-specific version corresponding to the device first > >> - followed by the generic version. > >> +- compatible: Must be "lvds-encoder" > >> > >> Required nodes: > >> > >> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt > >> new file mode 100644 > >> index 000000000000..a13e778503e6 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/display/bridge/ti,ds90c185.txt > >> @@ -0,0 +1,55 @@ > >> +Texas Instruments FPD-Link (LVDS) Serializer > >> +-------------------------------------------- > >> + > >> +The DS90C185 and DS90C187 are low-power serializers for portable > >> +battery-powered applications that reduces the size of the RGB > >> +interface between the host GPU and the display. > >> + > >> +Required properties: > >> + > >> +- compatible: Should be > >> + "ti,ds90c185", "lvds-encoder" for the TI DS90C185 FPD-Link Serializer > >> + "ti,ds90c187", "lvds-encoder" for the TI DS90C187 FPD-Link Serializer > >> + > >> +Optional properties: > >> + > >> +- pwdn-gpios: Power down control GPIO (the PDB pin, active-low) > > > > powerdown-gpios is the standard name. > > The lvds-encoder driver handles this binding, and that driver incidentally > also implements the thine,thc63lvdm83d binding which already has a > pwdn-gpios property. Should the thine,thc63lvdm83d binding be updated and > the driver be made to support both properties? > > Since the lvds-encoder driver never had support for the pwdn-gpios (at least > not upstream) I suppose there is also the option to simply go with > powerdown-gpios as you suggest and not bother with support for the > pwdn-gpios property. It is probably safe to just change it given it is not used in any dts nor supported in the driver. Rob _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
