[v6 0/2] Add Colorspace connector property interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series creates a new connector property to program
colorspace to sink devices. Modern sink devices support more
than 1 type of colorspace like 601, 709, BT2020 etc. This helps
to switch based on content type which is to be displayed. The
decision lies with compositors as to in which scenarios, a
particular colorspace will be picked.

This will be helpful mostly to switch to higher gamut colorspaces
like BT2020 when the media content is encoded as BT2020. Thereby
giving a good visual experience to users.

The expectation from userspace is that it should parse the EDID
and get supported colorspaces. Use this property and switch to the
one supported. Kernel will not give the supported colorspaces since
this is panel dependent and our current property infrastructure is
not supporting it.

Basically the expectation from userspace is:
 - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink
   colorspace
 - Set this new property to let the sink know what it
   converted the CRTC output to.
 - This property is just to inform sink what colorspace
   source is trying to drive.

Have tested this using xrandr by using below command:
xrandr --output HDMI2 --set "Colorspace" "BT2020_rgb"

v2: Addressed Ville and Maarten's review comments. Merged the 2nd
and 3rd patch into one common logical patch.

v3: Removed Adobe references from enum definitions as per
Ville, Hans Verkuil and Jonas Karlman suggestions. Changed
default to an unset state where driver will assign the colorspace
when not chosen by user, suggested by Ville and Maarten. Addressed
other misc review comments from Maarten. Split the changes to
have separate colorspace property for DP and HDMI.

v4: Addressed Chris and Ville's review comments, and created a
common colorspace property for DP and HDMI, filtered the list
based on the colorspaces supported by the respective protocol
standard. Handled the default case more efficiently.

v5: Modified the colorspace property creation helper to take
platform specific enum list based on the capabilities of the
platform as suggested by Shashank. With this there is no need
for segregation between DP and HDMI.

v6: Addressed Shashank's review comments.

Uma Shankar (2):
  drm: Add colorspace connector property
  drm/i915: Attach colorspace property and enable modeset

 drivers/gpu/drm/drm_atomic_uapi.c      |  4 ++
 drivers/gpu/drm/drm_connector.c        | 82 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_atomic.c    |  1 +
 drivers/gpu/drm/i915/intel_connector.c | 63 ++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h       |  1 +
 drivers/gpu/drm/i915/intel_hdmi.c      | 18 ++++++++
 include/drm/drm_connector.h            | 17 +++++++
 include/uapi/drm/drm_mode.h            | 33 ++++++++++++++
 8 files changed, 219 insertions(+)

-- 
1.9.1

Uma Shankar (2):
  drm: Add colorspace connector property
  drm/i915: Attach colorspace property and enable modeset

 drivers/gpu/drm/drm_atomic_uapi.c      |  4 ++
 drivers/gpu/drm/drm_connector.c        | 79 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_atomic.c    |  1 +
 drivers/gpu/drm/i915/intel_connector.c | 63 +++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h       |  1 +
 drivers/gpu/drm/i915/intel_hdmi.c      | 19 ++++++++
 include/drm/drm_connector.h            | 17 ++++++++
 include/uapi/drm/drm_mode.h            | 33 ++++++++++++++
 8 files changed, 217 insertions(+)

-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux