Regards
Shashank
On 12/11/2018 11:44 PM, Uma Shankar wrote:
This patch attaches the colorspace connector property to the
hdmi connector. Based on colorspace change, modeset will be
triggered to switch to new colorspace.
Based on colorspace property value create an infoframe
with appropriate colorspace. This can be used to send an
infoframe packet with proper colorspace value set which
will help to enable wider color gamut like BT2020 on sink.
This patch attaches and enables HDMI colorspace, DP will be
taken care separately.
v2: Merged the changes of creating infoframe as well to this
patch as per Maarten's suggestion.
v3: Addressed review comments from Shashank. Separated HDMI
and DP colorspaces as suggested by Ville and Maarten.
v4: Addressed Chris and Ville's review comments, and created a
common colorspace property for DP and HDMI, filtered the list
based on the colorspaces supported by the respective protocol
standard. Handle the default case properly.
v5: Added Platform specific colorspace enums and called the
property creation helper using the same.
Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_atomic.c | 1 +
drivers/gpu/drm/i915/intel_connector.c | 63 ++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_drv.h | 1 +
drivers/gpu/drm/i915/intel_hdmi.c | 18 ++++++++++
4 files changed, 83 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index a5a2c8f..35ef70a 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -125,6 +125,7 @@ int intel_digital_connector_atomic_check(struct drm_connector *conn,
*/
if (new_conn_state->force_audio != old_conn_state->force_audio ||
new_conn_state->broadcast_rgb != old_conn_state->broadcast_rgb ||
+ new_state->colorspace != old_state->colorspace ||
new_conn_state->base.picture_aspect_ratio != old_conn_state->base.picture_aspect_ratio ||
new_conn_state->base.content_type != old_conn_state->base.content_type ||
new_conn_state->base.scaling_mode != old_conn_state->base.scaling_mode)
diff --git a/drivers/gpu/drm/i915/intel_connector.c b/drivers/gpu/drm/i915/intel_connector.c
index 18e370f..59fa420 100644
--- a/drivers/gpu/drm/i915/intel_connector.c
+++ b/drivers/gpu/drm/i915/intel_connector.c
@@ -31,6 +31,48 @@
#include "intel_drv.h"
#include "i915_drv.h"
+static const struct drm_prop_enum_list gen10_hdmi_colorspace[] = {
+ /* For Default case, driver will set the colorspace */
+ { COLORIMETRY_DEFAULT, "Default" },
+ /* Standard Definition Colorimetry based on CEA 861 */
+ { COLORIMETRY_ITU_601, "ITU_601" },
+ { COLORIMETRY_ITU_709, "ITU_709" },
+ /* Standard Definition Colorimetry based on IEC 61966-2-4 */
+ { COLORIMETRY_XV_YCC_601, "XV_YCC_601" },
+ /* High Definition Colorimetry based on IEC 61966-2-4 */
+ { COLORIMETRY_XV_YCC_709, "XV_YCC_709" },
+ /* Colorimetry based on IEC 61966-2-1/Amendment 1 */
+ { COLORIMETRY_S_YCC_601, "S_YCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 [33] */
+ { COLORIMETRY_OPYCC_601, "opYCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 */
+ { COLORIMETRY_OPRGB, "opRGB" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { COLORIMETRY_BT2020_RGB, "BT2020_RGB" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { COLORIMETRY_BT2020_YCC, "BT2020_YCC" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" },
+};
+
+static const struct drm_prop_enum_list legacy_hdmi_colorspace[] = {
+ /* For Default case, driver will set the colorspace */
+ { COLORIMETRY_DEFAULT, "Default" },
+ /* Standard Definition Colorimetry based on CEA 861 */
+ { COLORIMETRY_ITU_601, "ITU_601" },
+ { COLORIMETRY_ITU_709, "ITU_709" },
+ /* Standard Definition Colorimetry based on IEC 61966-2-4 */
+ { COLORIMETRY_XV_YCC_601, "XV_YCC_601" },
+ /* High Definition Colorimetry based on IEC 61966-2-4 */
+ { COLORIMETRY_XV_YCC_709, "XV_YCC_709" },
+ /* Colorimetry based on IEC 61966-2-1/Amendment 1 */
+ { COLORIMETRY_S_YCC_601, "S_YCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 [33] */
+ { COLORIMETRY_OPYCC_601, "opYCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 */
+ { COLORIMETRY_OPRGB, "opRGB" },
+};
+
int intel_connector_init(struct intel_connector *connector)
{
struct intel_digital_connector_state *conn_state;
@@ -262,3 +304,24 @@ int intel_ddc_get_modes(struct drm_connector *connector,
connector->dev->mode_config.aspect_ratio_property,
DRM_MODE_PICTURE_ASPECT_NONE);
}
+
+void
+intel_attach_colorspace_property(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+
+ if (INTEL_GEN(dev_priv) >= 10) {
I am slightly unsure on if we should expose BT2020 colorspace support
for CNL/GEN10 too, even though on paper it supports it, but do we have a
proper color pipeline which can handle input degamma and more precisely
the output gamma lut precision, which might be required post blending to
restore BT2020 non-linearity. Can you please confirm on this, and until,
we should just keep it > 10, instead of >= 10.
+ if (!drm_mode_create_colorspace_property(connector,
+ gen10_hdmi_colorspace,
+ ARRAY_SIZE(gen10_hdmi_colorspace)))
+ drm_object_attach_property(&connector->base,
+ connector->colorspace_property, 0);
+ } else {
+ if (!drm_mode_create_colorspace_property(connector,
+ legacy_hdmi_colorspace,
+ ARRAY_SIZE(legacy_hdmi_colorspace)))
+ drm_object_attach_property(&connector->base,
+ connector->colorspace_property, 0);
+ }
+}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index a62d77b..891bc82 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1762,6 +1762,7 @@ int intel_connector_update_modes(struct drm_connector *connector,
void intel_attach_force_audio_property(struct drm_connector *connector);
void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
void intel_attach_aspect_ratio_property(struct drm_connector *connector);
+void intel_attach_colorspace_property(struct drm_connector *connector);
/* intel_csr.c */
void intel_csr_ucode_init(struct drm_i915_private *);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index e2c6a2b..7ddc723 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -486,6 +486,22 @@ static void intel_hdmi_set_avi_infoframe(struct intel_encoder *encoder,
else
frame.avi.colorspace = HDMI_COLORSPACE_RGB;
+ if (conn_state->colorspace == COLORIMETRY_DEFAULT) {
+ /* Set ITU 709 as default for HDMI */
+ frame.avi.colorimetry = COLORIMETRY_ITU_709;
+ } else if (conn_state->colorspace < COLORIMETRY_XV_YCC_601) {
+ frame.avi.colorimetry = conn_state->colorspace;
+ } else {
+ frame.avi.colorimetry = HDMI_COLORIMETRY_EXTENDED;
+ /*
+ * Starting from extended list where COLORIMETRY_XV_YCC_601
+ * is the first extended mode and its value is 0 as per HDMI
+ * specification.
+ */
+ frame.avi.extended_colorimetry = conn_state->colorspace -
+ COLORIMETRY_XV_YCC_601;
+ }
We will need these changes for lspcon_set_infoframes() function too, as
there are talks about needing HDR suppot using LSPCON. If you want to
defer this to next patch, I would like to see a TODO: note.
+
drm_hdmi_avi_infoframe_quant_range(&frame.avi, adjusted_mode,
crtc_state->limited_color_range ?
HDMI_QUANTIZATION_RANGE_LIMITED :
@@ -2135,6 +2151,8 @@ static void intel_hdmi_destroy(struct drm_connector *connector)
intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
intel_attach_aspect_ratio_property(connector);
+ intel_attach_colorspace_property(connector);
+
seems like extra blank line ?
drm_connector_attach_content_type_property(connector);
connector->state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
With the above minor comments fixed, patch looks good to me, feel free
to use:
Reviewed-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
