Get the ref clock of the PHY from the device tree instead of hardcoding its name and rate. Note: This change could break old out-of-tree DTS files that use the 10nm PHY Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> --- Changes in v5: - pass the ref clock name to _register() instead of storing a point to the clk object in the PLL data structure Changes in v4: - none Changes in v3: - fixed check for EPROBE_DEFER - added note to commit message about breaking old DTS files - added 'Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>' tag Changes in v2: - remove anonymous array in clk_init_data assignment - log error code if devm_clk_get() fails - don't log devm_clk_get() failures for -EPROBE_DEFER - updated commit message --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c index 4c03f0b7343ed..adbe5395f4f38 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c @@ -625,12 +625,14 @@ static void dsi_pll_10nm_destroy(struct msm_dsi_pll *pll) * state to follow the master PLL's divider/mux state. Therefore, we don't * require special clock ops that also configure the slave PLL registers */ -static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm) +static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm, + const char *ref_clk_name) { char clk_name[32], parent[32], vco_name[32]; char parent2[32], parent3[32], parent4[32]; + struct clk_init_data vco_init = { - .parent_names = (const char *[]){ "xo" }, + .parent_names = &ref_clk_name, .num_parents = 1, .name = vco_name, .flags = CLK_IGNORE_UNUSED, @@ -771,6 +773,8 @@ struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id) { struct dsi_pll_10nm *pll_10nm; struct msm_dsi_pll *pll; + struct clk *vco_ref_clk; + const char *vco_ref_clk_name; int ret; if (!pdev) @@ -786,6 +790,16 @@ struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id) pll_10nm->id = id; pll_10nm_list[id] = pll_10nm; + vco_ref_clk = devm_clk_get(&pdev->dev, "ref"); + if (IS_ERR(vco_ref_clk)) { + ret = PTR_ERR(vco_ref_clk); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "couldn't get 'ref' clock: %d\n", + ret); + return ERR_PTR(ret); + } + vco_ref_clk_name = __clk_get_name(vco_ref_clk); + pll_10nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY"); if (IS_ERR_OR_NULL(pll_10nm->phy_cmn_mmio)) { dev_err(&pdev->dev, "failed to map CMN PHY base\n"); @@ -811,7 +825,7 @@ struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id) pll_10nm->vco_delay = 1; - ret = pll_10nm_register(pll_10nm); + ret = pll_10nm_register(pll_10nm, vco_ref_clk_name); if (ret) { dev_err(&pdev->dev, "failed to register PLL: %d\n", ret); return ERR_PTR(ret); -- 2.20.1.415.g653613c723-goog _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel