Techstar TS8550B MIPI DSI panel is 480x854, 2-lane MIPI DSI LCD panel with inbuilt ST7701 chip. The default regulator names in ST7701 chip is renamed in Techstar TS8550B so, add specific binding names for them. Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> --- Changes for v6: - none .../display/panel/sitronix,st7701.txt | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt new file mode 100644 index 000000000000..ccd17597f1f6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.txt @@ -0,0 +1,30 @@ +Sitronix ST7701 based LCD panels + +ST7701 designed for small and medium sizes of TFT LCD display, is +capable of supporting up to 480RGBX864 in resolution. It provides +several system interfaces like MIPI/RGB/SPI. + +Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has +inbuilt ST7701 chip. + +Required properties: +- compatible: must be "sitronix,st7701" and one of + * "techstar,ts8550b" +- reset-gpios: a GPIO phandle for the reset pin + +Required properties for techstar,ts8550b: +- reg: DSI virtual channel used by that screen +- VCC-supply: analog regulator for MIPI circuit +- IOVCC-supply: I/O system regulator + +Optional properties: +- backlight: phandle for the backlight control. + +panel@0 { + compatible = "techstar,ts8550b", "sitronix,st7701"; + reg = <0>; + VCC-supply = <®_dldo2>; + IOVCC-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; +}; -- 2.18.0.321.gffc6fa0e3 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel