|
On 12/13/2018 1:52 PM, Winkler, Tomas
wrote:
Implements the HDCP2.2 repeaters authentication steps such as verifying the
downstream topology and sending stream management information.
v2: Rebased.
v3:
-EINVAL is returned for topology error and rollover scenario.
Endianness conversion func from drm_hdcp.h is used [Uma]
v4:
Rebased as part of patches reordering.
Defined the mei service functions [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
v6:
%s/uintxx_t/uxx
Check for comp_master is removed.
v7:
Adjust to the new mei interface.
style issue fixed.
v8:
drm_hdcp.h change is moved into separate patch [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_hdcp.c | 123
+++++++++++++++++++++++++++++++++++++-
1 file changed, 121 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_hdcp.c
b/drivers/gpu/drm/i915/intel_hdcp.c
index f1f0ef294e20..b52da5c3159d 100644
--- a/drivers/gpu/drm/i915/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/intel_hdcp.c
@@ -978,7 +978,7 @@ static int hdcp2_prepare_skey(struct intel_connector
*connector,
return ret;
}
-static __attribute__((unused)) int
+static int
hdcp2_verify_rep_topology_prepare_ack(struct intel_connector *connector,
struct hdcp2_rep_send_receiverid_list
*rep_topology,
@@ -999,7 +999,7 @@ hdcp2_verify_rep_topology_prepare_ack(struct
intel_connector *connector,
return ret;
}
-static __attribute__((unused)) int
+static int
hdcp2_verify_mprime(struct intel_connector *connector,
struct hdcp2_rep_stream_ready *stream_ready) { @@ -
1182,6 +1182,119 @@ static int hdcp2_session_key_exchange(struct
intel_connector *connector)
return 0;
}
+static
+int hdcp2_propagate_stream_management_info(struct intel_connector
+*connector) {
+ struct intel_digital_port *intel_dig_port =
conn_to_dig_port(connector);
+ struct intel_hdcp *hdcp = &connector->hdcp;
+ union {
+ struct hdcp2_rep_stream_manage stream_manage;
+ struct hdcp2_rep_stream_ready stream_ready;
+ } msgs;
+ const struct intel_hdcp_shim *shim = hdcp->shim;
+ int ret;
+
+ /* Prepare RepeaterAuth_Stream_Manage msg */
+ msgs.stream_manage.msg_id = HDCP_2_2_REP_STREAM_MANAGE;
+ drm_hdcp2_u32_to_seq_num(msgs.stream_manage.seq_num_m,
+hdcp->seq_num_m);
+
+ /* K no of streams is fixed as 1. Stored as big-endian. */
+ msgs.stream_manage.k = __swab16(1);
cpu_to_be16(1);
Sure. Tomas. That will suit better.
BTW, whether current mei- i915 interface suits to your preference?
Thanks
Ram
+
+ /* For HDMI this is forced to be 0x0. For DP SST also this is 0x0. */
+ msgs.stream_manage.streams[0].stream_id = 0;
+ msgs.stream_manage.streams[0].stream_type = hdcp->content_type;
+
+ /* Send it to Repeater */
+ ret = shim->write_2_2_msg(intel_dig_port, &msgs.stream_manage,
+ sizeof(msgs.stream_manage));
+ if (ret < 0)
+ return ret;
+
+ ret = shim->read_2_2_msg(intel_dig_port,
HDCP_2_2_REP_STREAM_READY,
+ &msgs.stream_ready,
sizeof(msgs.stream_ready));
+ if (ret < 0)
+ return ret;
+
+ hdcp->port_data.seq_num_m = hdcp->seq_num_m;
+ hdcp->port_data.streams[0].stream_type = hdcp->content_type;
+
+ ret = hdcp2_verify_mprime(connector, &msgs.stream_ready);
+ if (ret < 0)
+ return ret;
+
+ hdcp->seq_num_m++;
+
+ if (hdcp->seq_num_m > HDCP_2_2_SEQ_NUM_MAX) {
+ DRM_DEBUG_KMS("seq_num_m roll over.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static
+int hdcp2_authenticate_repeater_topology(struct intel_connector
+*connector) {
+ struct intel_digital_port *intel_dig_port =
conn_to_dig_port(connector);
+ struct intel_hdcp *hdcp = &connector->hdcp;
+ union {
+ struct hdcp2_rep_send_receiverid_list recvid_list;
+ struct hdcp2_rep_send_ack rep_ack;
+ } msgs;
+ const struct intel_hdcp_shim *shim = hdcp->shim;
+ u8 *rx_info;
+ u32 seq_num_v;
+ int ret;
+
+ ret = shim->read_2_2_msg(intel_dig_port,
HDCP_2_2_REP_SEND_RECVID_LIST,
+ &msgs.recvid_list, sizeof(msgs.recvid_list));
+ if (ret < 0)
+ return ret;
+
+ rx_info = msgs.recvid_list.rx_info;
+
+ if (HDCP_2_2_MAX_CASCADE_EXCEEDED(rx_info[1]) ||
+ HDCP_2_2_MAX_DEVS_EXCEEDED(rx_info[1])) {
+ DRM_DEBUG_KMS("Topology Max Size Exceeded\n");
+ return -EINVAL;
+ }
+
+ /* Converting and Storing the seq_num_v to local variable as DWORD
*/
+ drm_hdcp2_seq_num_to_u32(&seq_num_v,
msgs.recvid_list.seq_num_v);
+
+ if (seq_num_v < hdcp->seq_num_v) {
+ /* Roll over of the seq_num_v from repeater. Reauthenticate.
*/
+ DRM_DEBUG_KMS("Seq_num_v roll over.\n");
+ return -EINVAL;
+ }
+
+ ret = hdcp2_verify_rep_topology_prepare_ack(connector,
+ &msgs.recvid_list,
+ &msgs.rep_ack);
+ if (ret < 0)
+ return ret;
+
+ hdcp->seq_num_v = seq_num_v;
+ ret = shim->write_2_2_msg(intel_dig_port, &msgs.rep_ack,
+ sizeof(msgs.rep_ack));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int hdcp2_authenticate_repeater(struct intel_connector
+*connector) {
+ int ret;
+
+ ret = hdcp2_authenticate_repeater_topology(connector);
+ if (ret < 0)
+ return ret;
+
+ return hdcp2_propagate_stream_management_info(connector);
+}
+
static int hdcp2_authenticate_sink(struct intel_connector *connector) {
struct intel_digital_port *intel_dig_port =
conn_to_dig_port(connector); @@ -1223,6 +1336,12 @@ static int
hdcp2_authenticate_sink(struct intel_connector *connector)
sizeof(stream_type_msg));
if (ret < 0)
return ret;
+ } else if (hdcp->is_repeater) {
+ ret = hdcp2_authenticate_repeater(connector);
+ if (ret < 0) {
+ DRM_DEBUG_KMS("Repeater Auth Failed. Err: %d\n",
ret);
+ return ret;
+ }
}
hdcp->port_data.streams[0].stream_type = hdcp->content_type;
--
2.7.4
|
