[Bug 47007] HDMI monitor polling causing 100ms rendering stalls

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



https://bugs.freedesktop.org/show_bug.cgi?id=47007

--- Comment #31 from Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxx> 2012-03-15 09:13:58 PDT ---
(In reply to comment #30)
> > Hm, shared_ddc is also set with single physical DVI-I connector, at least on
> > this motherboard. 
> 
> According to your vbios tables there are actually 3 physical connectors on this
> board, VGA, DVI-D, and DP.  If there are only two physical connectors DP and
> DVI-I port, then the oem set up the connector tables wrong and we need a quirk
> to properly expose it as single DVI-I connector.

It is a single DVI-I physically.

But even identifying it would not change anything with regards to polling
induced rendering stalls, right? 

Thinking again about my proposed solution from #20, then your failure case from
#22. I can see it is a real concern and presumably this setup is not that
uncommon since you worry about it? 

I just don't at the moment see how to fit all these requirements into a generic
solution. :(

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux