Re: [V5 PATCH 2/4] drivers-gpu-drm-i915-panel-invert-brightness-via-parameter.patch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 15 Mar 2012 15:56:25 +0100, Carsten Emde <C.Emde@xxxxxxxxx> wrote:
> Following the documentation of the Legacy Backlight Brightness (LBB)
> Register in the configuration space of some Intel PCI graphics adapters,
> setting the LBB register with the value 0x0 causes the backlight to be
> turned off, and 0xFF causes the backlight to be set to 100% intensity
> (http://download.intel.com/embedded/processors/Whitepaper/324567.pdf).
> The Acer Aspire 5734Z, however, turns the backlight off at 0xFF and sets
> it to maximum intensity at 0. In consequence, the screen of this systems
> becomes dark at an early boot stage which makes it unusable. The same
> inversion applies to the BLC_PWM_CTL I915 register. This problem was
> introduced in kernel version 2.6.38 when the PCI device of this system
> was first supported by the i915 KMS module.
> 
> This patch adds a parameter to the i915 module to enable inversion of
> the brightness variable (i915.invert_brightness).
> 
> Signed-off-by: Carsten Emde <C.Emde@xxxxxxxxx>
Reviewed-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
-Chris

-- 
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux