Hi, On Tue, Dec 4, 2018 at 3:54 PM Jeykumar Sankaran <jsanka@xxxxxxxxxxxxxx> wrote: > > DPU is short for the Display Processing Unit. It is the display > controller on Qualcomm SDM845 chips. > > This change adds MDSS and DSI nodes to enable display on the > target device. > > Changes in v2: > - Beefed up commit message > - Use SoC specific compatibles for mdss and dpu (Rob H) > - Use assigned-clocks to set initial clock frequency(Rob H) > Changes in v3: > - added IOMMU node > - Fix device naming (remove _phys) > - Use correct IRQ_TYPE in interrupt specifiers > Changes in v4: > - move mdss node to preserve the unit address sort order > - remove _clk suffix from dsi clocks > (both the comments are from Doug Anderson) > Changes in v5: > - Keep the device status "disabled" by default (Bjorn Andersson) > - Use MDSS_GDSC macro (Jordan) > - Fix phy-names (Jordan) > - List reg ranges in numerical order (Jordan) > Changes in v6: > - Separating this patch out of the series > - fix phy-names > > Signed-off-by: Jeykumar Sankaran <jsanka@xxxxxxxxxxxxxx> > Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 203 +++++++++++++++++++++++++++++++++++ > 1 file changed, 203 insertions(+) With my admittedly limited understanding of the device tree for graphics, this looks good to me. Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> ...this works for me on sdm845-cheza. Specifically I tested it on our 4.19 branch which has some display backports and a few picks from the mailing list. Anyone specifically interested in the tree I tested with can see https://crrev.com/c/1327901, which includes this patch. Thus: Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx> _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
