This series implements support for YUV formats using the display engine
frontend in the sun4i DRM driver, with various fixes along the way.
Scaling is supported for every format handled by the frontend.
The tiling mode used by the VPU on Allwinner platforms is also supported
by this series and a dedicated fourcc modifier is introduced, along with
a specific ioctl for allocating tiled buffers.
New common fourcc helpers are also introduced in this series, especially
related to YUV formats.
This was tested on the A33 and A20 platforms and all supported features
work properly on both. Framebuffer offsets and source positions are not
supported at this point.
Changes since v2:
* Removed DRM format helpers taking the format fourcc;
* Passed the DRM format info structure when needed instead of iterating
through the list;
* Removed the sun4i-specific ioctl for allocating tiled buffers, which
will be rebranded as a generic one in an upcoming patch;
* Improved comment for X1 tiled offset and simplified its calculation;
* Corrected author email and added SoB where needed;
* Rebased on latest drm-misc next.
Changes since v1:
* Extended source selected cleanup to both YUV and video channels;
* Split and reworded comment about backend scaling;
* Sorted newly-introduced lists alphabetically;
* Simplified functions to check if a format is supported;
* Reworked frontend selection logic as discussed;
* Made YUV helpers common, with fourcc and drm_info fashions;
* Changed the CREATE_TILED ioctl flags to match the CREATE_DUMB ioctl;
* Reworked YUV dimensions calculations to use drm_format_info;
* Dropped MB32 part in modifier to match V4L2 definition name;
* Improved the description of the tiling modifier;
* Avoided splitting CSC coefficients to avoid introducing a new module;
* Fixed building the driver as modules;
* Various code simplifications and cleanups;
* Split commits into logical changes.
Maxime Ripard (5):
drm/sun4i: Move access control before setting the register as
documented
drm/sun4i: frontend: Add a quirk structure
drm/sun4i: Set the coef_rdy bit right after the coef have been set
drm/sun4i: Make COEF_RDY conditional
drm/sun4i: frontend: Move the FIR filter phases to our quirks
Paul Kocialkowski (16):
drm/fourcc: Add format info helpers for checking YUV planes
disposition
drm/fourcc: Add format info helpers for checking YUV sub-sampling
drm/sun4i: backend: Use explicit fourcc helpers for packed YUV422
check
drm/sun4i: frontend: Pass DRM format info to input mode helper
drm/sun4i: frontend: Determine input format based on colorspace
drm/sun4i: frontend: Configure and enable YUV to RGB CSC when needed
drm/sun4i: frontend: Add support for packed YUV422 input formats
drm/sun4i: frontend: Add support for semi-planar YUV input formats
drm/sun4i: frontend: Add support for planar YUV input formats
drm/fourcc: Add definitions for Allwinner vendor and VPU tiled format
drm/sun4i: frontend: Add support for tiled YUV input mode
configuration
drm/sun4i: Add buffer stride and offset configuration for tiling mode
drm/sun4i: frontend: Add and use helper for checking tiling support
drm/sun4i: layer: Add tiled modifier support and helper
drm/sun4i: drv: Allow framebuffer modifiers in mode config
drm/sun4i: frontend: Add A20-specific device-tree compatible and
quirks
drivers/gpu/drm/sun4i/sun4i_backend.c | 3 +-
drivers/gpu/drm/sun4i/sun4i_drv.c | 1 +
drivers/gpu/drm/sun4i/sun4i_frontend.c | 356 ++++++++++++++++++++++---
drivers/gpu/drm/sun4i/sun4i_frontend.h | 40 +++
drivers/gpu/drm/sun4i/sun4i_layer.c | 28 +-
include/drm/drm_fourcc.h | 117 ++++++++
include/uapi/drm/drm_fourcc.h | 16 ++
7 files changed, 528 insertions(+), 33 deletions(-)
--
2.19.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
