Re: [PATCH v10 08/23] drm/i915/dp: Compute DSC pipe config in atomic check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 20, 2018 at 10:37:21AM -0800, Manasi Navare wrote:
> DSC params like the enable, compressed bpp, slice count and
> dsc_split are added to the intel_crtc_state. These parameters
> are set based on the requested mode and available link parameters
> during the pipe configuration in atomic check phase.
> These values are then later used to populate the remaining DSC
> and RC parameters before enbaling DSC in atomic commit.
> 
> v14:
> Remove leftovers, use dsc_bpc, refine dsc_compute_config (Ville)
> v13:
> * Compute DSC bpc only when DSC is req to be enabled (Ville)
> v12:
> * Override bpp with dsc dpcd color depth (Manasi)
> v11:
> * Const crtc_state, reject DSC on DP without FEC (Ville)
> * Dont set dsc_split to false (Ville)
> v10:
> * Add a helper for dp_dsc support (Ville)
> * Set pipe_config to max bpp, link params for DSC for now (Ville)
> * Compute bpp - use dp dsc support helper (Ville)
> v9:
> * Rebase on top of drm-tip that now uses fast_narrow config
> for edp (Manasi)
> v8:
> * Check for DSC bpc not 0 (manasi)
> 
> v7:
> * Fix indentation in compute_m_n (Manasi)
> 
> v6 (From Gaurav):
> * Remove function call of intel_dp_compute_dsc_params() and
> invoke intel_dp_compute_dsc_params() in the patch where
> it is defined to fix compilation warning (Gaurav)
> 
> v5:
> Add drm_dsc_cfg in intel_crtc_state (Manasi)
> 
> v4:
> * Rebase on refactoring of intel_dp_compute_config on tip (Manasi)
> * Add a comment why we need to check PSR while enabling DSC (Gaurav)
> 
> v3:
> * Check PPR > max_cdclock to use 2 VDSC instances (Ville)
> 
> v2:
> * Add if-else for eDP/DP (Gaurav)
> 
> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
> Cc: Gaurav K Singh <gaurav.k.singh@xxxxxxxxx>
> Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
> Acked-by: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/intel_display.c |   2 +-
>  drivers/gpu/drm/i915/intel_display.h |   2 +-
>  drivers/gpu/drm/i915/intel_dp.c      | 191 ++++++++++++++++++++++++---
>  3 files changed, 171 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 132e978227fb..f2e6425d09ef 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -6723,7 +6723,7 @@ static void compute_m_n(unsigned int m, unsigned int n,
>  }
>  
>  void
> -intel_link_compute_m_n(int bits_per_pixel, int nlanes,
> +intel_link_compute_m_n(u16 bits_per_pixel, int nlanes,
>  		       int pixel_clock, int link_clock,
>  		       struct intel_link_m_n *m_n,
>  		       bool constant_n)
> diff --git a/drivers/gpu/drm/i915/intel_display.h b/drivers/gpu/drm/i915/intel_display.h
> index 5d50decbcbb5..afb6435887df 100644
> --- a/drivers/gpu/drm/i915/intel_display.h
> +++ b/drivers/gpu/drm/i915/intel_display.h
> @@ -407,7 +407,7 @@ struct intel_link_m_n {
>  	     (__i)++) \
>  		for_each_if(plane)
>  
> -void intel_link_compute_m_n(int bpp, int nlanes,
> +void intel_link_compute_m_n(u16 bpp, int nlanes,
>  			    int pixel_clock, int link_clock,
>  			    struct intel_link_m_n *m_n,
>  			    bool constant_n);
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 2b090609bee2..78ec775aa90a 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -47,6 +47,8 @@
>  
>  /* DP DSC small joiner has 2 FIFOs each of 640 x 6 bytes */
>  #define DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER	61440
> +#define DP_DSC_MIN_SUPPORTED_BPC		8
> +#define DP_DSC_MAX_SUPPORTED_BPC		10
>  
>  /* DP DSC throughput values used for slice count calculations KPixels/s */
>  #define DP_DSC_PEAK_PIXEL_RATE			2720000
> @@ -1708,6 +1710,26 @@ struct link_config_limits {
>  	int min_bpp, max_bpp;
>  };
>  
> +static bool intel_dp_source_supports_dsc(struct intel_dp *intel_dp,
> +					 const struct intel_crtc_state *pipe_config)
> +{
> +	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> +
> +	/* FIXME: FEC needed for external DP until then reject DSC on DP */
> +	if (!intel_dp_is_edp(intel_dp))
> +		return false;
> +
> +	return INTEL_GEN(dev_priv) >= 10 &&
> +		pipe_config->cpu_transcoder != TRANSCODER_A;
> +}
> +
> +static bool intel_dp_supports_dsc(struct intel_dp *intel_dp,
> +				  const struct intel_crtc_state *pipe_config)
> +{
> +	return intel_dp_source_supports_dsc(intel_dp, pipe_config) &&
> +		drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd);
> +}
> +
>  static int intel_dp_compute_bpp(struct intel_dp *intel_dp,
>  				struct intel_crtc_state *pipe_config)
>  {
> @@ -1842,14 +1864,114 @@ intel_dp_compute_link_config_fast(struct intel_dp *intel_dp,
>  	return false;
>  }
>  
> +static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc)
> +{
> +	int i, num_bpc;
> +	u8 dsc_bpc[3] = {0};
> +
> +	num_bpc = drm_dp_dsc_sink_supported_input_bpcs(intel_dp->dsc_dpcd,
> +						       dsc_bpc);
> +	for (i = 0; i < num_bpc; i++) {
> +		if (dsc_max_bpc >= dsc_bpc[i])
> +			return dsc_bpc[i] * 3;
> +	}
> +
> +	return 0;
> +}
> +
> +static bool intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> +					struct intel_crtc_state *pipe_config,
> +					struct drm_connector_state *conn_state,
> +					struct link_config_limits *limits)
> +{
> +	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> +	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
> +	struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
> +	u8 dsc_max_bpc;
> +	u16 dsc_max_output_bpp = 0;
> +	u8 dsc_dp_slice_count = 0;

Pointless initialization, and these can be moved to narrower scope.

> +	int pipe_bpp;
> +
> +	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
> +		return false;
> +
> +	dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
> +			    conn_state->max_requested_bpc);
> +
> +	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, dsc_max_bpc);
> +	if (pipe_bpp < DP_DSC_MIN_SUPPORTED_BPC * 3) {
> +		DRM_DEBUG_KMS("No DSC support for less than 8bpc\n");
> +		return false;
> +	}
> +
> +	/*
> +	 * For now enable DSC for max bpp, max link rate, max lane count.
> +	 * Optimize this later for the minimum possible link rate/lane count
> +	 * with DSC enabled for the requested mode.
> +	 */
> +	pipe_config->pipe_bpp = pipe_bpp;
> +	pipe_config->port_clock = intel_dp->common_rates[limits->max_clock];
> +	pipe_config->lane_count = limits->max_lane_count;
> +
> +	if (intel_dp_is_edp(intel_dp)) {
> +		pipe_config->dsc_params.compressed_bpp =
> +			min_t(u16, drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4,
> +			      pipe_config->pipe_bpp);
> +		pipe_config->dsc_params.slice_count =
> +			drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
> +							true);
> +	} else {
> +		dsc_max_output_bpp =
> +			intel_dp_dsc_get_output_bpp(pipe_config->port_clock,
> +						    pipe_config->lane_count,
> +						    adjusted_mode->crtc_clock,
> +						    adjusted_mode->crtc_hdisplay);
> +			dsc_dp_slice_count =
> +				intel_dp_dsc_get_slice_count(intel_dp,
> +							     adjusted_mode->crtc_clock,
> +							     adjusted_mode->crtc_hdisplay);

There's some kind of indent fail here.

> +		if (!(dsc_max_output_bpp && dsc_dp_slice_count)) {

'!a || !b' might be a bit more legible.

The logic seems good now so
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

> +			DRM_DEBUG_KMS("Compressed BPP/Slice Count not supported\n");
> +			return false;
> +		}
> +		pipe_config->dsc_params.compressed_bpp = min_t(u16,
> +							       dsc_max_output_bpp >> 4,
> +							       pipe_config->pipe_bpp);
> +		pipe_config->dsc_params.slice_count = dsc_dp_slice_count;
> +	}
> +	/*
> +	 * VDSC engine operates at 1 Pixel per clock, so if peak pixel rate
> +	 * is greater than the maximum Cdclock and if slice count is even
> +	 * then we need to use 2 VDSC instances.
> +	 */
> +	if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq) {
> +		if (pipe_config->dsc_params.slice_count > 1) {
> +			pipe_config->dsc_params.dsc_split = true;
> +		} else {
> +			DRM_DEBUG_KMS("Cannot split stream to use 2 VDSC instances\n");
> +			return false;
> +		}
> +	}
> +	pipe_config->dsc_params.compression_enable = true;
> +	DRM_DEBUG_KMS("DP DSC computed with Input Bpp = %d "
> +		      "Compressed Bpp = %d Slice Count = %d\n",
> +		      pipe_config->pipe_bpp,
> +		      pipe_config->dsc_params.compressed_bpp,
> +		      pipe_config->dsc_params.slice_count);
> +
> +	return true;
> +}
> +
>  static bool
>  intel_dp_compute_link_config(struct intel_encoder *encoder,
> -			     struct intel_crtc_state *pipe_config)
> +			     struct intel_crtc_state *pipe_config,
> +			     struct drm_connector_state *conn_state)
>  {
>  	struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
>  	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
>  	struct link_config_limits limits;
>  	int common_len;
> +	bool ret;
>  
>  	common_len = intel_dp_common_len_rate_limit(intel_dp,
>  						    intel_dp->max_link_rate);
> @@ -1888,7 +2010,7 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
>  		      intel_dp->common_rates[limits.max_clock],
>  		      limits.max_bpp, adjusted_mode->crtc_clock);
>  
> -	if (intel_dp_is_edp(intel_dp)) {
> +	if (intel_dp_is_edp(intel_dp))
>  		/*
>  		 * Optimize for fast and narrow. eDP 1.3 section 3.3 and eDP 1.4
>  		 * section A.1: "It is recommended that the minimum number of
> @@ -1898,26 +2020,42 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
>  		 * Note that we use the max clock and lane count for eDP 1.3 and
>  		 * earlier, and fast vs. wide is irrelevant.
>  		 */
> -		if (!intel_dp_compute_link_config_fast(intel_dp, pipe_config,
> -						       &limits))
> -			return false;
> -	} else {
> +		ret = intel_dp_compute_link_config_fast(intel_dp, pipe_config,
> +							&limits);
> +	 else
>  		/* Optimize for slow and wide. */
> -		if (!intel_dp_compute_link_config_wide(intel_dp, pipe_config,
> -						       &limits))
> +		ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config,
> +							&limits);
> +
> +	/* enable compression if the mode doesn't fit available BW */
> +	if (!ret) {
> +		if (!intel_dp_dsc_compute_config(intel_dp, pipe_config,
> +						 conn_state, &limits))
>  			return false;
>  	}
>  
> -	DRM_DEBUG_KMS("DP lane count %d clock %d bpp %d\n",
> -		      pipe_config->lane_count, pipe_config->port_clock,
> -		      pipe_config->pipe_bpp);
> +	if (pipe_config->dsc_params.compression_enable) {
> +		DRM_DEBUG_KMS("DP lane count %d clock %d Input bpp %d Compressed bpp %d\n",
> +			      pipe_config->lane_count, pipe_config->port_clock,
> +			      pipe_config->pipe_bpp,
> +			      pipe_config->dsc_params.compressed_bpp);
>  
> -	DRM_DEBUG_KMS("DP link rate required %i available %i\n",
> -		      intel_dp_link_required(adjusted_mode->crtc_clock,
> -					     pipe_config->pipe_bpp),
> -		      intel_dp_max_data_rate(pipe_config->port_clock,
> -					     pipe_config->lane_count));
> +		DRM_DEBUG_KMS("DP link rate required %i available %i\n",
> +			      intel_dp_link_required(adjusted_mode->crtc_clock,
> +						     pipe_config->dsc_params.compressed_bpp),
> +			      intel_dp_max_data_rate(pipe_config->port_clock,
> +						     pipe_config->lane_count));
> +	} else {
> +		DRM_DEBUG_KMS("DP lane count %d clock %d bpp %d\n",
> +			      pipe_config->lane_count, pipe_config->port_clock,
> +			      pipe_config->pipe_bpp);
>  
> +		DRM_DEBUG_KMS("DP link rate required %i available %i\n",
> +			      intel_dp_link_required(adjusted_mode->crtc_clock,
> +						     pipe_config->pipe_bpp),
> +			      intel_dp_max_data_rate(pipe_config->port_clock,
> +						     pipe_config->lane_count));
> +	}
>  	return true;
>  }
>  
> @@ -1983,7 +2121,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
>  		return false;
>  
> -	if (!intel_dp_compute_link_config(encoder, pipe_config))
> +	if (!intel_dp_compute_link_config(encoder, pipe_config, conn_state))
>  		return false;
>  
>  	if (intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) {
> @@ -2001,11 +2139,20 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  			intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_LIMITED;
>  	}
>  
> -	intel_link_compute_m_n(pipe_config->pipe_bpp, pipe_config->lane_count,
> -			       adjusted_mode->crtc_clock,
> -			       pipe_config->port_clock,
> -			       &pipe_config->dp_m_n,
> -			       constant_n);
> +	if (!pipe_config->dsc_params.compression_enable)
> +		intel_link_compute_m_n(pipe_config->pipe_bpp,
> +				       pipe_config->lane_count,
> +				       adjusted_mode->crtc_clock,
> +				       pipe_config->port_clock,
> +				       &pipe_config->dp_m_n,
> +				       constant_n);
> +	else
> +		intel_link_compute_m_n(pipe_config->dsc_params.compression_enable,
> +				       pipe_config->lane_count,
> +				       adjusted_mode->crtc_clock,
> +				       pipe_config->port_clock,
> +				       &pipe_config->dp_m_n,
> +				       constant_n);
>  
>  	if (intel_connector->panel.downclock_mode != NULL &&
>  		dev_priv->drrs.type == SEAMLESS_DRRS_SUPPORT) {
> -- 
> 2.19.1

-- 
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux