Re: [PATCH] drm: rcar-du: Fix DU3 start/stop on M3-N

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Laurent-san

Thank you for your comments on my patches! I understand.

With this patch,  the problem has been improved.

CC Simon-san

If you wait a little longer, the error log will look like this:

[    2.825800] [drm] No driver support for vblank timestamp query.
[   13.027591] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* [CRTC:55:crtc-2] flip_done timed out [   23.267575] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:55:crtc-2] flip_done timed out [   33.507572] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:57:VGA-1] flip_done timed out [   43.747572] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-1] flip_done timed out [   53.987572] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* [CRTC:55:crtc-2] flip_done timed out
[   53.990386] Console: switching to colour frame buffer device 128x48
[   64.227573] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:55:crtc-2] flip_done timed out [   74.467571] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:57:VGA-1] flip_done timed out [   84.707570] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:30:plane-1] flip_done timed out [   94.947573] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* [CRTC:55:crtc-2] flip_done timed out [   95.040503] rcar-du feb00000.display: fb0: DRM emulated frame buffer device [   95.048144] [drm] Initialized rcar-du 1.0.0 20130110 for feb00000.display on minor 0
[   95.055907] [drm] Device feb00000.display probed
...

Thank you

Jinso/Hoan


On 2018/11/26 17:21, Simon Horman wrote:
On Fri, Nov 23, 2018 at 01:48:08PM +0200, Laurent Pinchart wrote:
Group start/stop is controlled by the DRES and DEN bits of DSYSR0 for
the first group and DSYSR2 for the second group. On most DU instances,
this maps to the first CRTC of the group. On M3-N, however, DU2 doesn't
exist, but DSYSR2 does. There is no CRTC object there that maps to the
correct DSYSR register.

Commit 9144adc5e5a9 ("drm: rcar-du: Cache DSYSR value to ensure known
initial value") switched group start/stop from using group read/write
access to DSYSR to a CRTC-based API to cache the DSYSR value. While
doing so, it introduced a regression on M3-N by accessing DSYSR3 instead
of DSYSR2 to start/stop the second group.

To fix this, access the DSYSR register directly through group read/write
if the SoC is missing the first DU channel of the group. Keep using the
rcar_du_crtc_dsysr_clr_set() function otherwise, to retain the DSYSR
caching feature.

Fixes: 9144adc5e5a9 ("drm: rcar-du: Cache DSYSR value to ensure known initial value")
Reported-by: Hoan Nguyen An <na-hoan@xxxxxxxxxxx>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Thanks Laurent,

I have confirmed that with this patch applied on top of
renesas-devel-20181123-v4.20-rc3 Salvator-XS / M3-N ES1.0
boots to user-space when the kernel is compiled using renesas_defconfig.

Tested-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>


Without this patch applied the boot log looks this:

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd073]
[    0.000000] Linux version 4.20.0-rc3-arm64-renesas
(horms@xxxxxxxxxxxxxxx) (gcc version 7.3.0 (GCC)) #283 SMP PREEMPT Mon Nov
26 09:14:14 CET 2018
[    0.000000] Machine model: Renesas Salvator-X 2nd version board based on
r8a77965
[    0.000000] printk: debug: ignoring loglevel setting.
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 128 MiB at 0x00000000b8000000
[    0.000000] On node 0 totalpages: 491520
[    0.000000]   DMA32 zone: 7680 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 491520 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS resident on physical CPU 0x0
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] random: get_random_bytes called from start_kernel+0xac/0x480
with crng_init=0
[    0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s64648 r0
d29560 u94208
[    0.000000] pcpu-alloc: s64648 r0 d29560 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for EL2 vector hardening
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages:
483840
[    0.000000] Kernel command line: ignore_loglevel rw root=/dev/nfs
nfsroot=10.7.3.162:/srv/nfs/arm64 ip=on
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152
bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576
bytes)
[    0.000000] Memory: 1771168K/1966080K available (9980K kernel code,
1122K rwdata, 3008K rodata, 768K init, 12111K bss, 63840K reserved, 131072K
cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Running RCU self tests
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU lockdep checking is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=64 to
nr_cpu_ids=2.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is
25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] arch_timer: cp15 timer(s) running at 8.32MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x1eb398c07, max_idle_ns: 440795202503 ns
[    0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every
2199023255503ns
[    0.000142] Console: colour dummy device 80x25
[    0.001298] printk: console [tty0] enabled
[    0.001326] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
Ingo Molnar
[    0.001366] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001391] ... MAX_LOCK_DEPTH:          48
[    0.001415] ... MAX_LOCKDEP_KEYS:        8191
[    0.001441] ... CLASSHASH_SIZE:          4096
[    0.001466] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001492] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001518] ... CHAINHASH_SIZE:          32768
[    0.001543]  memory used by lock dependency info: 7263 kB
[    0.001573]  per task-struct memory footprint: 1920 bytes
[    0.001636] Calibrating delay loop (skipped), value calculated using
timer frequency.. 16.64 BogoMIPS (lpj=33280)
[    0.001692] pid_max: default: 32768 minimum: 301
[    0.001878] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.001928] Mountpoint-cache hash table entries: 4096 (order: 3, 32768
bytes)
[    0.024092] ASID allocator initialised with 32768 entries
[    0.032076] rcu: Hierarchical SRCU implementation.
[    0.040670] Detected Renesas R-Car Gen3 r8a77965 ES1.0
[    0.041374] EFI services will not be available.
[    0.048148] smp: Bringing up secondary CPUs ...
[    0.080449] Detected PIPT I-cache on CPU1
[    0.080499] CPU1: Booted secondary processor 0x0000000001 [0x411fd073]
[    0.080808] smp: Brought up 1 node, 2 CPUs
[    0.080895] SMP: Total of 2 processors activated.
[    0.080928] CPU features: detected: 32-bit EL0 Support
[    0.080959] CPU features: detected: CRC32 instructions
[    0.083973] CPU: All CPU(s) started at EL1
[    0.084025] alternatives: patching kernel code
[    0.085610] devtmpfs: initialized
[    0.101022] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.101100] futex hash table entries: 512 (order: 4, 65536 bytes)
[    0.102979] pinctrl core: initialized pinctrl subsystem
[    0.104177] DMI not present or invalid.
[    0.104879] NET: Registered protocol family 16
[    0.105422] audit: initializing netlink subsys (disabled)
[    0.105718] audit: type=2000 audit(0.104:1): state=initialized
audit_enabled=0 res=1
[    0.106460] cpuidle: using governor menu
[    0.106691] vdso: 2 pages (1 code @ (____ptrval____), 1 data @
(____ptrval____))
[    0.106749] hw-breakpoint: found 6 breakpoint and 4 watchpoint
registers.
[    0.108376] DMA: preallocated 256 KiB pool for atomic allocations
[    0.112247] sh-pfc e6060000.pin-controller: r8a77965_pfc support
registered
[    0.146202] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.146965] cryptd: max_cpu_qlen set to 1000
[    0.153209] vgaarb: loaded
[    0.153581] SCSI subsystem initialized
[    0.153927] libata version 3.00 loaded.
[    0.154165] usbcore: registered new interface driver usbfs
[    0.154249] usbcore: registered new interface driver hub
[    0.154374] usbcore: registered new device driver usb
[    0.156184] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 400000
Hz
[    0.156730] media: Linux media interface: v0.10
[    0.156800] videodev: Linux video capture interface: v2.00
[    0.156924] pps_core: LinuxPPS API ver. 1 registered
[    0.156956] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giometti@xxxxxxxx>
[    0.157020] PTP clock support registered
[    0.157073] EDAC MC: Ver: 3.0.0
[    0.158364] Advanced Linux Sound Architecture Driver Initialized.
[    0.159529] clocksource: Switched to clocksource arch_sys_counter
[    0.238280] VFS: Disk quotas dquot_6.6.0
[    0.238398] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[    0.249396] NET: Registered protocol family 2
[    0.250315] tcp_listen_portaddr_hash hash table entries: 1024 (order: 4,
73728 bytes)
[    0.250492] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[    0.250587] TCP bind hash table entries: 16384 (order: 8, 1048576 bytes)
[    0.252472] TCP: Hash tables configured (established 16384 bind 16384)
[    0.252824] UDP hash table entries: 1024 (order: 5, 163840 bytes)
[    0.253116] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
[    0.253609] NET: Registered protocol family 1
[    0.254765] RPC: Registered named UNIX socket transport module.
[    0.254820] RPC: Registered udp transport module.
[    0.254850] RPC: Registered tcp transport module.
[    0.254880] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.254923] PCI: CLS 0 bytes, default 64
[    0.256118] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7
counters available
[    0.256712] kvm [1]: HYP mode not available
[    0.262582] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.273506] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.274481] NFS: Registering the id_resolver key type
[    0.274599] Key type id_resolver registered
[    0.274642] Key type id_legacy registered
[    0.274682] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.274733] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver
Registering...
[    0.279467] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 245)
[    0.279647] io scheduler noop registered
[    0.279876] io scheduler cfq registered (default)
[    0.279911] io scheduler mq-deadline registered
[    0.279942] io scheduler kyber registered
[    0.285126] gpio_rcar e6050000.gpio: driving 16 GPIOs
[    0.285649] gpio_rcar e6051000.gpio: driving 29 GPIOs
[    0.286129] gpio_rcar e6052000.gpio: driving 15 GPIOs
[    0.286568] gpio_rcar e6053000.gpio: driving 16 GPIOs
[    0.287005] gpio_rcar e6054000.gpio: driving 18 GPIOs
[    0.287438] gpio_rcar e6055000.gpio: driving 26 GPIOs
[    0.288056] gpio_rcar e6055400.gpio: driving 32 GPIOs
[    0.288498] gpio_rcar e6055800.gpio: driving 4 GPIOs
[    0.290158] rcar-pcie fe000000.pcie: host bridge /soc/pcie@fe000000
ranges:
[    0.290238] rcar-pcie fe000000.pcie:    IO 0xfe100000..0xfe1fffff ->
0x00000000
[    0.290325] rcar-pcie fe000000.pcie:   MEM 0xfe200000..0xfe3fffff ->
0xfe200000
[    0.290388] rcar-pcie fe000000.pcie:   MEM 0x30000000..0x37ffffff ->
0x30000000
[    0.290442] rcar-pcie fe000000.pcie:   MEM 0x38000000..0x3fffffff ->
0x38000000
[    0.355586] rcar-pcie fe000000.pcie: PCIe link down
[    0.356211] rcar-pcie ee800000.pcie: host bridge /soc/pcie@ee800000
ranges:
[    0.356282] rcar-pcie ee800000.pcie:    IO 0xee900000..0xee9fffff ->
0x00000000
[    0.356348] rcar-pcie ee800000.pcie:   MEM 0xeea00000..0xeebfffff ->
0xeea00000
[    0.356410] rcar-pcie ee800000.pcie:   MEM 0xc0000000..0xc7ffffff ->
0xc0000000
[    0.356464] rcar-pcie ee800000.pcie:   MEM 0xc8000000..0xcfffffff ->
0xc8000000
[    0.423444] rcar-pcie ee800000.pcie: PCIe link down
[    0.424698] pwm-backlight backlight: Linked as a consumer to regulator.3
[    0.497733] SuperH (H)SCI(F) driver initialized
[    0.498836] e6550000.serial: ttySC1 at MMIO 0xe6550000 (irq = 28,
base_baud = 0) is a hscif
[    0.500165] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 110,
base_baud = 0) is a scif
[    1.381522] printk: console [ttySC0] enabled
[    1.388623] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.395328] [drm] No driver support for vblank timestamp query.
[    1.402388] rcar-dw-hdmi fead0000.hdmi: Detected HDMI TX controller
v2.01a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.412740] rcar-dw-hdmi fead0000.hdmi: registered DesignWare HDMI I2C
bus driver
[    1.435731] loop: module loaded
[    1.441987] scsi host0: sata_rcar
[    1.445954] ata1: SATA max UDMA/133 irq 160
[    1.452142] libphy: Fixed MDIO Bus: probed
[    1.456656] tun: Universal TUN/TAP device driver, 1.6
[    1.462124] CAN device driver interface
[    1.467692] VFIO - User Level meta-driver version: 0.3
[    1.473231] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.479822] ehci-pci: EHCI PCI platform driver
[    1.484335] ehci-platform: EHCI generic platform driver
[    1.490520] ehci-platform ee0a0100.usb: EHCI Host Controller
[    1.496334] ehci-platform ee0a0100.usb: new USB bus registered, assigned
bus number 1
[    1.504725] ehci-platform ee0a0100.usb: irq 156, io mem 0xee0a0100
[    1.523548] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10
[    1.531082] hub 1-0:1.0: USB hub found
[    1.534991] hub 1-0:1.0: 1 port detected
[    1.539907] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.546183] ohci-pci: OHCI PCI platform driver
[    1.550714] ohci-platform: OHCI generic platform driver
[    1.556697] ohci-platform ee0a0000.usb: Generic Platform OHCI controller
[    1.563486] ohci-platform ee0a0000.usb: new USB bus registered, assigned
bus number 2
[    1.571643] ohci-platform ee0a0000.usb: irq 156, io mem 0xee0a0000
[    1.666522] hub 2-0:1.0: USB hub found
[    1.670371] hub 2-0:1.0: 1 port detected
[    1.675757] xhci-hcd ee000000.usb: xHCI Host Controller
[    1.681059] xhci-hcd ee000000.usb: new USB bus registered, assigned bus
number 3
[    1.688800] xhci-hcd ee000000.usb: Direct firmware load for
r8a779x_usb3_v3.dlmem failed with error -2
[    1.698350] xhci-hcd ee000000.usb: can't setup: -2
[    1.703211] xhci-hcd ee000000.usb: USB bus 3 deregistered
[    1.708823] xhci-hcd: probe of ee000000.usb failed with error -2
[    1.715167] usbcore: registered new interface driver usb-storage
[    1.722160] renesas_usbhs e6590000.usb: host probed
[    1.727128] renesas_usbhs e6590000.usb: no transceiver found
[    1.733140] renesas_usbhs e6590000.usb: gadget probed
[    1.738490] renesas_usbhs e6590000.usb: probed
[    1.744707] renesas_usb3 ee020000.usb: probed with phy
[    1.750684] i2c /dev entries driver
[    1.763154] cs2000-cp 2-004f: revision - C1
[    1.767553] i2c-rcar e6510000.i2c: probed
[    1.772529] pca953x 4-0020: 4-0020 supply vcc not found, using dummy
regulator
[    1.780030] pca953x 4-0020: Linked as a consumer to regulator.0
[    1.787205] GPIO line 355 (PCIE/SATA switch) hogged as output/low
[    1.801115] random: fast init done
[    1.806749] i2c-rcar e66d8000.i2c: probed
[    1.811689] adv748x 4-0070: Endpoint
/soc/i2c@e66d8000/video-receiver@70/port@7/endpoint on port 7
[    1.820728] adv748x 4-0070: Endpoint
/soc/i2c@e66d8000/video-receiver@70/port@8/endpoint on port 8
[    1.829755] adv748x 4-0070: Endpoint
/soc/i2c@e66d8000/video-receiver@70/port@a/endpoint on port 10
[    1.838868] adv748x 4-0070: Endpoint
/soc/i2c@e66d8000/video-receiver@70/port@b/endpoint on port 11
[    1.848533] adv748x 4-0070: chip found @ 0xe0 revision 2143
[    1.867574] ata1: link resume succeeded after 1 retries
[    1.965229] rcar_fdp1 fe940000.fdp1: Device registered as /dev/video0
[    1.971904] rcar_fdp1 fe940000.fdp1: FDP1 Unidentifiable (0x02010204)
[    1.979446] ata1: SATA link down (SStatus 0 SControl 300)
[    1.996718] rcar-csi2 fea80000.csi2: 1 lanes found
[    2.001841] rcar-csi2 feaa0000.csi2: 4 lanes found
[    2.010703]
[    2.012201] ======================================================
[    2.018379] WARNING: possible circular locking dependency detected
[    2.024558] 4.20.0-rc3-arm64-renesas #283 Not tainted
[    2.029607] ------------------------------------------------------
[    2.035785] swapper/0/1 is trying to acquire lock:
[    2.040573] (____ptrval____) (&group->lock){+.+.}, at:
rvin_group_notify_bound+0x30/0xa8
[    2.048677]
[    2.048677] but task is already holding lock:
[    2.054507] (____ptrval____) (list_lock){+.+.}, at:
__v4l2_async_notifier_register+0x48/0x158
[    2.063041]
[    2.063041] which lock already depends on the new lock.
[    2.063041]
[    2.071218]
[    2.071218] the existing dependency chain (in reverse order) is:
[    2.078699]
[    2.078699] -> #1 (list_lock){+.+.}:
[    2.083757]        __mutex_lock+0x70/0x840
[    2.087851]        mutex_lock_nested+0x1c/0x28
[    2.092292]        v4l2_async_notifier_init+0x28/0x48
[    2.097341]        rcar_vin_probe+0x504/0x6a0
[    2.101700]        platform_drv_probe+0x50/0xa0
[    2.106228]        really_probe+0x20c/0x2b0
[    2.110409]        driver_probe_device+0x58/0x108
[    2.115112]        __driver_attach+0xe4/0xe8
[    2.119379]        bus_for_each_dev+0x74/0xc8
[    2.123734]        driver_attach+0x20/0x28
[    2.127828]        bus_add_driver+0x1b0/0x220
[    2.132182]        driver_register+0x60/0x110
[    2.136537]        __platform_driver_register+0x40/0x48
[    2.141763]        rcar_vin_driver_init+0x18/0x20
[    2.146467]        do_one_initcall+0x180/0x36c
[    2.150907]        kernel_init_freeable+0x478/0x51c
[    2.155784]        kernel_init+0x10/0x100
[    2.159793]        ret_from_fork+0x10/0x1c
[    2.163885]
[    2.163885] -> #0 (&group->lock){+.+.}:
[    2.169200]        lock_acquire+0xc0/0x230
[    2.173293]        __mutex_lock+0x70/0x840
[    2.177386]        mutex_lock_nested+0x1c/0x28
[    2.181826]        rvin_group_notify_bound+0x30/0xa8
[    2.186788]        v4l2_async_match_notify+0x54/0x138
[    2.191838]        v4l2_async_notifier_try_all_subdevs+0x5c/0xc0
[    2.197843]        __v4l2_async_notifier_register+0xe8/0x158
[    2.203500]        v4l2_async_notifier_register+0x40/0x68
[    2.208895]        rcar_vin_probe+0x588/0x6a0
[    2.213249]        platform_drv_probe+0x50/0xa0
[    2.217777]        really_probe+0x20c/0x2b0
[    2.221958]        driver_probe_device+0x58/0x108
[    2.226659]        __driver_attach+0xe4/0xe8
[    2.230927]        bus_for_each_dev+0x74/0xc8
[    2.235281]        driver_attach+0x20/0x28
[    2.239374]        bus_add_driver+0x1b0/0x220
[    2.243728]        driver_register+0x60/0x110
[    2.248082]        __platform_driver_register+0x40/0x48
[    2.253304]        rcar_vin_driver_init+0x18/0x20
[    2.258005]        do_one_initcall+0x180/0x36c
[    2.262446]        kernel_init_freeable+0x478/0x51c
[    2.267321]        kernel_init+0x10/0x100
[    2.271327]        ret_from_fork+0x10/0x1c
[    2.275419]
[    2.275419] other info that might help us debug this:
[    2.275419]
[    2.283423]  Possible unsafe locking scenario:
[    2.283423]
[    2.289340]        CPU0                    CPU1
[    2.293865]        ----                    ----
[    2.298391]   lock(list_lock);
[    2.301442]                                lock(&group->lock);
[    2.307272]                                lock(list_lock);
[    2.312842]   lock(&group->lock);
[    2.316153]
[    2.316153]  *** DEADLOCK ***
[    2.316153]
[    2.322073] 2 locks held by swapper/0/1:
[    2.325991]  #0: (____ptrval____) (&dev->mutex){....}, at:
__driver_attach+0x5c/0xe8
[    2.333737]  #1: (____ptrval____) (list_lock){+.+.}, at:
__v4l2_async_notifier_register+0x48/0x158
[    2.342699]
[    2.342699] stack backtrace:
[    2.347057] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.20.0-rc3-arm64-renesas #283
[    2.354712] Hardware name: Renesas Salvator-X 2nd version board based on
r8a77965 (DT)
[    2.362628] Call trace:
[    2.365073]  dump_backtrace+0x0/0x1c0
[    2.368732]  show_stack+0x14/0x20
[    2.372046]  dump_stack+0xbc/0xf4
[    2.375358]  print_circular_bug.isra.19+0x1d4/0x2e8
[    2.380233]  __lock_acquire+0x12e8/0x1800
[    2.384239]  lock_acquire+0xc0/0x230
[    2.387811]  __mutex_lock+0x70/0x840
[    2.391383]  mutex_lock_nested+0x1c/0x28
[    2.395302]  rvin_group_notify_bound+0x30/0xa8
[    2.399743]  v4l2_async_match_notify+0x54/0x138
[    2.404271]  v4l2_async_notifier_try_all_subdevs+0x5c/0xc0
[    2.409754]  __v4l2_async_notifier_register+0xe8/0x158
[    2.414890]  v4l2_async_notifier_register+0x40/0x68
[    2.419765]  rcar_vin_probe+0x588/0x6a0
[    2.423598]  platform_drv_probe+0x50/0xa0
[    2.427605]  really_probe+0x20c/0x2b0
[    2.431264]  driver_probe_device+0x58/0x108
[    2.435444]  __driver_attach+0xe4/0xe8
[    2.439190]  bus_for_each_dev+0x74/0xc8
[    2.443023]  driver_attach+0x20/0x28
[    2.446595]  bus_add_driver+0x1b0/0x220
[    2.450428]  driver_register+0x60/0x110
[    2.454261]  __platform_driver_register+0x40/0x48
[    2.458962]  rcar_vin_driver_init+0x18/0x20
[    2.463142]  do_one_initcall+0x180/0x36c
[    2.467061]  kernel_init_freeable+0x478/0x51c
[    2.471415]  kernel_init+0x10/0x100
[    2.474901]  ret_from_fork+0x10/0x1c
[    2.479311] rcar-vin e6ef0000.video: Device registered as video11
[    2.485571] rcar-vin e6ef1000.video: Device registered as video12
[    2.491808] rcar-vin e6ef2000.video: Device registered as video13
[    2.498039] rcar-vin e6ef3000.video: Device registered as video14
[    2.504291] rcar-vin e6ef4000.video: Device registered as video15
[    2.510527] rcar-vin e6ef5000.video: Device registered as video16
[    2.516772] rcar-vin e6ef6000.video: Device registered as video17
[    2.523000] rcar-vin e6ef7000.video: Device registered as video18
[    2.534628] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 1 trip
points
[    2.545646] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 1 trip
points
[    2.556637] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 1 trip
points
[    2.565665] cpufreq: cpufreq_online: CPU0: Running at unlisted freq:
1497600 KHz
[    2.573145] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency
changed to: 1500000 KHz
[    2.582928] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
[    2.588933] renesas_sdhi_internal_dmac ee100000.sd: Got WP GPIO
[    2.595712] renesas_sdhi_internal_dmac ee140000.sd: Linked as a consumer
to regulator.2
[    2.603846] renesas_sdhi_internal_dmac ee140000.sd: Linked as a consumer
to regulator.1
[    2.660495] renesas_sdhi_internal_dmac ee140000.sd: mmc0 base at
0xee140000 max clock rate 200 MHz
[    2.670133] renesas_sdhi_internal_dmac ee160000.sd: Got CD GPIO
[    2.676212] renesas_sdhi_internal_dmac ee160000.sd: Got WP GPIO
[    2.683001] ledtrig-cpu: registered to indicate activity on CPUs
[    2.689793] usbcore: registered new interface driver usbhid
[    2.695434] usbhid: USB HID core driver
[    2.720993] rcar_sound ec500000.sound: probed
[    2.725796] NET: Registered protocol family 17
[    2.730284] can: controller area network core (rev 20170425 abi 9)
[    2.736572] NET: Registered protocol family 29
[    2.741050] can: raw protocol (rev 20170425)
[    2.745348] can: broadcast manager protocol (rev 20170425 t)
[    2.751042] can: netlink gateway (rev 20170425) max_hops=1
[    2.756751] Key type dns_resolver registered
[    2.761614] registered taskstats version 1
[    2.773596] mmc0: new HS200 MMC card at address 0001
[    2.779233] mmcblk0: mmc0:0001 BGSD3R 29.1 GiB
[    2.783483] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs
[    2.784162] mmcblk0boot0: mmc0:0001 BGSD3R partition 1 16.0 MiB
[    2.792685] phy_rcar_gen3_usb2 ee080200.usb-phy: Linked as a consumer to
regulator.4
[    2.796641] mmcblk0boot1: mmc0:0001 BGSD3R partition 2 16.0 MiB
[    2.805663] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.810272] mmcblk0rpmb: mmc0:0001 BGSD3R partition 3 4.00 MiB, chardev
(243:0)
[    2.816755] [drm] No driver support for vblank timestamp query.
<no more output>

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux