[PATCH 2/9] drm/i915/psr: Don't tell sink that main link will be active while is active PSR2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For PSR2 there is no register to tell HW to keep main link enabled
while PSR2 is active, so don't configure sink DPCD with a
misleading value.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_psr.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index f5d27a02eb28..888e348cc1b4 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -391,12 +391,14 @@ static void intel_psr_enable_sink(struct intel_dp *intel_dp)
 		drm_dp_dpcd_writeb(&intel_dp->aux, DP_RECEIVER_ALPM_CONFIG,
 				   DP_ALPM_ENABLE);
 		dpcd_val |= DP_PSR_ENABLE_PSR2;
+	} else {
+		if (dev_priv->psr.link_standby)
+			dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
+
+		if (INTEL_GEN(dev_priv) >= 8)
+			dpcd_val |= DP_PSR_CRC_VERIFICATION;
 	}
 
-	if (dev_priv->psr.link_standby)
-		dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
-	if (!dev_priv->psr.psr2_enabled && INTEL_GEN(dev_priv) >= 8)
-		dpcd_val |= DP_PSR_CRC_VERIFICATION;
 	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
 
 	drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
-- 
2.19.2

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux