This switches the fb_tls8204.c to use GPIO descriptors
rather than numerical gpios.
Signed-off-by: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
---
drivers/staging/fbtft/fb_tls8204.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/fbtft/fb_tls8204.c b/drivers/staging/fbtft/fb_tls8204.c
index 277b6ed9c725..bec6dd0ffb01 100644
--- a/drivers/staging/fbtft/fb_tls8204.c
+++ b/drivers/staging/fbtft/fb_tls8204.c
@@ -12,7 +12,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
@@ -94,7 +94,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
/* The display is 102x68 but the LCD is 84x48.
* Set the write pointer at the start of each row.
*/
- gpio_set_value(par->gpio.dc, 0);
+ gpiod_set_value(par->gpio.dc, 0);
write_reg(par, 0x80 | 0);
write_reg(par, 0x40 | y);
@@ -109,7 +109,7 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
*buf++ = ch;
}
/* Write the row */
- gpio_set_value(par->gpio.dc, 1);
+ gpiod_set_value(par->gpio.dc, 1);
ret = par->fbtftops.write(par, par->txbuf.buf, WIDTH);
if (ret < 0) {
dev_err(par->info->device,
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
