Hi Laurent, On 23/11/2018 15:25, Laurent Pinchart wrote: > Hi Neil, > > Thank you for the patch. > > On Friday, 23 November 2018 16:02:14 EET Neil Armstrong wrote: >> Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS >> Scrambling when supported or mandatory. >> >> This patch also adds an helper to setup the control bit to support >> the hight TMDS Bit Period/TMDS Clock-Period Ratio as required with > > s/hight/high/ ? Thanks for catching ! > >> TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes. > > Why do you need a helper for this, is there no way it could be handled > internally ? I could, but all the platforms would also do it internally... seems better to have common helper, no ? And it will be usable by the PHY models handler in the dw-hdmi driver aswell. > >> These changes were based on work done by Huicong Xu <xhc@xxxxxxxxxxxxxx> >> and Nickey Yang <nickey.yang@xxxxxxxxxxxxxx> to support HDMI2.0 modes >> on the Rockchip 4.4 BSP kernel at [1] >> >> [1] https://github.com/rockchip-linux/kernel/tree/release-4.4 >> >> Cc: Nickey Yang <nickey.yang@xxxxxxxxxxxxxx> >> Cc: Huicong Xu <xhc@xxxxxxxxxxxxxx> >> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> >> --- >> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 45 +++++++++++++++++++++-- >> drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 1 + >> include/drm/bridge/dw_hdmi.h | 1 + >> 3 files changed, 44 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index >> 5971976284bf..523508af70b0 100644 >> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c >> @@ -28,6 +28,7 @@ >> #include <drm/drm_crtc_helper.h> >> #include <drm/drm_edid.h> >> #include <drm/drm_encoder_slave.h> >> +#include <drm/drm_scdc_helper.h> >> #include <drm/bridge/dw_hdmi.h> >> >> #include <uapi/linux/media-bus-format.h> >> @@ -1015,6 +1016,20 @@ void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, >> unsigned short data, } >> EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write); >> >> +void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi) >> +{ >> + unsigned long mtmdsclock = hdmi->hdmi_data.video_mode.mpixelclock; >> + >> + /* Control for TMDS Bit Period/TMDS Clock-Period Ratio */ >> + if (hdmi->connector.display_info.hdmi.scdc.supported) { >> + if (mtmdsclock > 340000000) > > You use the 3.4GHz frequency in a few places, how about creating a macro ? Good idea. > >> + drm_scdc_set_high_tmds_clock_ratio(hdmi->ddc, 1); >> + else >> + drm_scdc_set_high_tmds_clock_ratio(hdmi->ddc, 0); >> + } >> +} >> +EXPORT_SYMBOL_GPL(dw_hdmi_set_high_tmds_clock_ratio); >> + >> static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool enable) >> { >> hdmi_mask_writeb(hdmi, !enable, HDMI_PHY_CONF0, >> @@ -1340,11 +1355,12 @@ static void hdmi_tx_hdcp_config(struct dw_hdmi >> *hdmi) >> >> static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode >> *mode) { >> + bool is_hdmi2_sink = hdmi->connector.display_info.hdmi.scdc.supported; >> struct hdmi_avi_infoframe frame; >> u8 val; >> >> /* Initialise info frame from DRM mode */ >> - drm_hdmi_avi_infoframe_from_display_mode(&frame, mode, false); >> + drm_hdmi_avi_infoframe_from_display_mode(&frame, mode, is_hdmi2_sink); >> >> if (hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format)) >> frame.colorspace = HDMI_COLORSPACE_YUV444; >> @@ -1503,7 +1519,8 @@ static void >> hdmi_config_vendor_specific_infoframe(struct dw_hdmi *hdmi, static void >> hdmi_av_composer(struct dw_hdmi *hdmi, >> const struct drm_display_mode *mode) >> { >> - u8 inv_val; >> + u8 inv_val, bytes; >> + struct drm_hdmi_info *hdmi_info = &hdmi->connector.display_info.hdmi; >> struct hdmi_vmode *vmode = &hdmi->hdmi_data.video_mode; >> int hblank, vblank, h_de_hs, v_de_vs, hsync_len, vsync_len; >> unsigned int vdisplay; >> @@ -1513,7 +1530,9 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi, >> dev_dbg(hdmi->dev, "final pixclk = %d\n", vmode->mpixelclock); >> >> /* Set up HDMI_FC_INVIDCONF */ >> - inv_val = (hdmi->hdmi_data.hdcp_enable ? >> + inv_val = (hdmi->hdmi_data.hdcp_enable || >> + vmode->mpixelclock > 340000000 || >> + hdmi_info->scdc.scrambling.low_rates ? >> HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE : >> HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE); >> >> @@ -1562,6 +1581,26 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi, >> vsync_len /= 2; >> } >> >> + /* Scrambling Control */ >> + if (hdmi_info->scdc.supported) { >> + if (vmode->mpixelclock > 340000000 || >> + hdmi_info->scdc.scrambling.low_rates) { >> + drm_scdc_readb(&hdmi->i2c->adap, SCDC_SINK_VERSION, >> + &bytes); >> + drm_scdc_writeb(&hdmi->i2c->adap, SCDC_SOURCE_VERSION, >> + bytes); > > Shouldn't the source version be min(sink version, highest supported source > version) ? How should the "highest supported source version" be defined ? > >> + drm_scdc_set_scrambling(&hdmi->i2c->adap, 1); >> + hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, >> + HDMI_MC_SWRSTZ); >> + hdmi_writeb(hdmi, 1, HDMI_FC_SCRAMBLER_CTRL); >> + } else { >> + hdmi_writeb(hdmi, 0, HDMI_FC_SCRAMBLER_CTRL); >> + hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, >> + HDMI_MC_SWRSTZ); >> + drm_scdc_set_scrambling(&hdmi->i2c->adap, 0); >> + } >> + } >> + >> /* Set up horizontal active pixel width */ >> hdmi_writeb(hdmi, mode->hdisplay >> 8, HDMI_FC_INHACTV1); >> hdmi_writeb(hdmi, mode->hdisplay, HDMI_FC_INHACTV0); >> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h >> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h index >> 9d90eb9c46e5..3f3c616eba97 100644 >> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h >> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h >> @@ -255,6 +255,7 @@ >> #define HDMI_FC_MASK2 0x10DA >> #define HDMI_FC_POL2 0x10DB >> #define HDMI_FC_PRCONF 0x10E0 >> +#define HDMI_FC_SCRAMBLER_CTRL 0x10E1 >> >> #define HDMI_FC_GMD_STAT 0x1100 >> #define HDMI_FC_GMD_EN 0x1101 >> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h >> index ccb5aa8468e0..d7cc5d094270 100644 >> --- a/include/drm/bridge/dw_hdmi.h >> +++ b/include/drm/bridge/dw_hdmi.h >> @@ -156,6 +156,7 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool >> hpd, bool rx_sense); void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, >> unsigned int rate); void dw_hdmi_audio_enable(struct dw_hdmi *hdmi); >> void dw_hdmi_audio_disable(struct dw_hdmi *hdmi); >> +void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi); >> >> /* PHY configuration */ >> void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address); > > Thanks for the review, Neil _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel