From: Thierry Reding <treding@xxxxxxxxxx>
Add the 5V HDMI regulator and hook up the VDD_1V0 and VDD_1V8HS supplies
from the PMIC to the display block. Also enable the display hub which is
responsible for instantiating the display controllers. Finally, enable
the third SOR that drives the TMDS signals to the HDMI connector.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 15 +++++++++--
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 25 +++++++++++++++++++
2 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 57d3f00464ce..204a207ff4bd 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -163,7 +163,7 @@
in-ldo4-6-supply = <&vdd_5v0_sys>;
in-ldo7-8-supply = <&vdd_1v8ls>;
- sd0 {
+ vdd_1v0: sd0 {
regulator-name = "VDD_1V0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -171,7 +171,7 @@
regulator-boot-on;
};
- sd1 {
+ vdd_1v8hs: sd1 {
regulator-name = "VDD_1V8HS";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -262,5 +262,16 @@
regulator-always-on;
regulator-boot-on;
};
+
+ vdd_hdmi: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+
+ regulator-name = "VDD_5V0_HDMI_CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 86f05504ca38..cbae8e8b1281 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -13,6 +13,31 @@
status = "okay";
};
+ host1x@13e00000 {
+ display-hub@15200000 {
+ status = "okay";
+ };
+
+ dpaux@155e0000 {
+ status = "okay";
+ };
+
+ sor@15b80000 {
+ status = "okay";
+
+ avdd-io-supply = <&vdd_1v0>;
+ vdd-pll-supply = <&vdd_1v8hs>;
+ hdmi-supply = <&vdd_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&ddc>;
+ nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 2) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ ddc: i2c@31c0000 {
+ status = "okay";
+ };
+
pwm@c340000 {
status = "okay";
};
--
2.19.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
