[PATCH 1/3] drm/tegra: vic: Implement explicit reset support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Thierry Reding <treding@xxxxxxxxxx>

Tegra supports generic PM domains on 64-bit ARM, and if that is enabled,
the power domain code will make sure that resets are asserted and
deasserted at appropriate points in time.

If generic PM domains are not implemented, such as on 32-bit Tegra, the
resets need to be asserted and deasserted explicitly by the driver.

Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
 drivers/gpu/drm/tegra/vic.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/vic.c b/drivers/gpu/drm/tegra/vic.c
index 9fa77405db01..23f530db45ad 100644
--- a/drivers/gpu/drm/tegra/vic.c
+++ b/drivers/gpu/drm/tegra/vic.c
@@ -38,6 +38,7 @@ struct vic {
 	struct iommu_domain *domain;
 	struct device *dev;
 	struct clk *clk;
+	struct reset_control *rst;
 
 	/* Platform configuration */
 	const struct vic_config *config;
@@ -56,13 +57,37 @@ static void vic_writel(struct vic *vic, u32 value, unsigned int offset)
 static int vic_runtime_resume(struct device *dev)
 {
 	struct vic *vic = dev_get_drvdata(dev);
+	int err;
+
+	err = clk_prepare_enable(vic->clk);
+	if (err < 0)
+		return err;
+
+	usleep_range(2000, 4000);
+
+	err = reset_control_deassert(vic->rst);
+	if (err < 0)
+		goto disable;
+
+	usleep_range(2000, 4000);
+
+	return 0;
 
-	return clk_prepare_enable(vic->clk);
+disable:
+	clk_disable_unprepare(vic->clk);
+	return err;
 }
 
 static int vic_runtime_suspend(struct device *dev)
 {
 	struct vic *vic = dev_get_drvdata(dev);
+	int err;
+
+	err = reset_control_assert(vic->rst);
+	if (err < 0)
+		return err;
+
+	usleep_range(2000, 4000);
 
 	clk_disable_unprepare(vic->clk);
 
@@ -324,6 +349,14 @@ static int vic_probe(struct platform_device *pdev)
 		return PTR_ERR(vic->clk);
 	}
 
+	if (!dev->pm_domain) {
+		vic->rst = devm_reset_control_get(dev, "vic");
+		if (IS_ERR(vic->rst)) {
+			dev_err(&pdev->dev, "failed to get reset\n");
+			return PTR_ERR(vic->rst);
+		}
+	}
+
 	vic->falcon.dev = dev;
 	vic->falcon.regs = vic->regs;
 	vic->falcon.ops = &vic_falcon_ops;
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux