On 29.10.2018 12:47, Tomi Valkeinen wrote: > tc358767 driver sets the connector type always to eDP. > > This patch sets the type to DP if there is no panel defined, which > implies that there's a DP connector on the board. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> > --- > drivers/gpu/drm/bridge/tc358767.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c > index be013bd7b30b..db93d927cb9a 100644 > --- a/drivers/gpu/drm/bridge/tc358767.c > +++ b/drivers/gpu/drm/bridge/tc358767.c > @@ -1207,7 +1207,8 @@ static int tc_bridge_attach(struct drm_bridge *bridge) > /* Create eDP connector */ > drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs); > ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs, > - DRM_MODE_CONNECTOR_eDP); > + tc->panel ? DRM_MODE_CONNECTOR_eDP : > + DRM_MODE_CONNECTOR_DisplayPort); > if (ret) > return ret; > Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx> -- Regards Andrzej _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
