After adding the hs_rate and lp_rate fields to the DSI device we need to populate these accordingly so display drivers can respect them. Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx> Cc: Chris Zhong <zyw@xxxxxxxxxxxxxx> Cc: Lin Huang <hl@xxxxxxxxxxxxxx> Cc: Heiko Stuebner <heiko@xxxxxxxxx> Tested-by: Heiko Stuebner <heiko@xxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- ChangeLog v1->v2: - Collect Heiko's Test tag --- drivers/gpu/drm/panel/panel-innolux-p079zca.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c index ca4ae45dd307..2013cd3c58ba 100644 --- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c +++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c @@ -518,6 +518,9 @@ static int innolux_panel_probe(struct mipi_dsi_device *dsi) dsi->mode_flags = desc->flags; dsi->format = desc->format; dsi->lanes = desc->lanes; + /* This is presumably the HS rate */ + dsi->hs_rate = desc->mode->clock * 1000; + /* FIXME: LP rate not specified */ err = innolux_panel_add(dsi, desc); if (err < 0) -- 2.19.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
