On Wed, Oct 10, 2018 at 02:54:32PM +0530, Sravanthi Kollukuduru wrote:
> Since the upstream interconnect bus framework has landed
> upstream, the existing references of custom bus scaling
> needs to be cleaned up.
Just a few nits below.
>
> Changes in v2:
> - Fixed build error due to partial clean up
>
> Signed-off-by: Sravanthi Kollukuduru <skolluku@xxxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 157 ++++++++++-------------
> drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 4 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++-----
> drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 ----------
> drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h | 21 +--
> 6 files changed, 86 insertions(+), 224 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> index 41c5191f9056..4ee6f0dd14f7 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> @@ -90,7 +90,6 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
> struct dpu_core_perf_params *perf)
> {
> struct dpu_crtc_state *dpu_cstate;
> - int i;
>
> if (!kms || !kms->catalog || !crtc || !state || !perf) {
> DPU_ERROR("invalid parameters\n");
> @@ -101,35 +100,24 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
> memset(perf, 0, sizeof(struct dpu_core_perf_params));
>
> if (!dpu_cstate->bw_control) {
> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
> - perf->bw_ctl[i] = kms->catalog->perf.max_bw_high *
> + perf->bw_ctl = kms->catalog->perf.max_bw_high *
> 1000ULL;
> - perf->max_per_pipe_ib[i] = perf->bw_ctl[i];
> - }
> + perf->max_per_pipe_ib = perf->bw_ctl;
> perf->core_clk_rate = kms->perf.max_core_clk_rate;
> } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
> - perf->bw_ctl[i] = 0;
> - perf->max_per_pipe_ib[i] = 0;
> - }
> + perf->bw_ctl = 0;
> + perf->max_per_pipe_ib = 0;
> perf->core_clk_rate = 0;
> } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
> - perf->bw_ctl[i] = kms->perf.fix_core_ab_vote;
> - perf->max_per_pipe_ib[i] = kms->perf.fix_core_ib_vote;
> - }
> + perf->bw_ctl = kms->perf.fix_core_ab_vote;
> + perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
> perf->core_clk_rate = kms->perf.fix_core_clk_rate;
> }
>
> DPU_DEBUG(
> - "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu llcc_ib=%llu llcc_ab=%llu mem_ib=%llu mem_ab=%llu\n",
> + "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
> crtc->base.id, perf->core_clk_rate,
> - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MNOC],
> - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC],
> - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC],
> - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC],
> - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI],
> - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI]);
> + perf->max_per_pipe_ib, perf->bw_ctl);
> }
>
> int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
> @@ -142,7 +130,6 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
> struct dpu_crtc_state *dpu_cstate;
> struct drm_crtc *tmp_crtc;
> struct dpu_kms *kms;
> - int i;
>
> if (!crtc || !state) {
> DPU_ERROR("invalid crtc\n");
> @@ -164,31 +151,28 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
> /* obtain new values */
> _dpu_core_perf_calc_crtc(kms, crtc, state, &dpu_cstate->new_perf);
>
> - for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC;
> - i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
> - bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl[i];
> - curr_client_type = dpu_crtc_get_client_type(crtc);
> + bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl;
> + curr_client_type = dpu_crtc_get_client_type(crtc);
>
> - drm_for_each_crtc(tmp_crtc, crtc->dev) {
> - if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) &&
> - (dpu_crtc_get_client_type(tmp_crtc) ==
> - curr_client_type) &&
> - (tmp_crtc != crtc)) {
> - struct dpu_crtc_state *tmp_cstate =
> - to_dpu_crtc_state(tmp_crtc->state);
> -
> - DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n",
> - tmp_crtc->base.id,
> - tmp_cstate->new_perf.bw_ctl[i],
> - tmp_cstate->bw_control);
> - /*
> - * For bw check only use the bw if the
> - * atomic property has been already set
> - */
> - if (tmp_cstate->bw_control)
> - bw_sum_of_intfs +=
> - tmp_cstate->new_perf.bw_ctl[i];
> - }
> + drm_for_each_crtc(tmp_crtc, crtc->dev) {
> + if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) &&
> + (dpu_crtc_get_client_type(tmp_crtc) ==
> + curr_client_type) &&
Can go on one line now
> + (tmp_crtc != crtc)) {
> + struct dpu_crtc_state *tmp_cstate =
> + to_dpu_crtc_state(tmp_crtc->state);
> +
> + DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n",
> + tmp_crtc->base.id,
> + tmp_cstate->new_perf.bw_ctl,
> + tmp_cstate->bw_control);
> + /*
> + * For bw check only use the bw if the
> + * atomic property has been already set
> + */
> + if (tmp_cstate->bw_control)
> + bw_sum_of_intfs +=
> + tmp_cstate->new_perf.bw_ctl;
Also fits on a line now
> }
>
> /* convert bandwidth to kb */
> @@ -219,9 +203,9 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
> }
>
> static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
> - struct drm_crtc *crtc, u32 bus_id)
> + struct drm_crtc *crtc)
> {
> - struct dpu_core_perf_params perf = { { 0 } };
> + struct dpu_core_perf_params perf = { 0 };
> enum dpu_crtc_client_type curr_client_type
> = dpu_crtc_get_client_type(crtc);
> struct drm_crtc *tmp_crtc;
> @@ -234,13 +218,12 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
> dpu_crtc_get_client_type(tmp_crtc)) {
> dpu_cstate = to_dpu_crtc_state(tmp_crtc->state);
>
> - perf.max_per_pipe_ib[bus_id] =
> - max(perf.max_per_pipe_ib[bus_id],
> - dpu_cstate->new_perf.max_per_pipe_ib[bus_id]);
> + perf.max_per_pipe_ib =
> + max(perf.max_per_pipe_ib,
> + dpu_cstate->new_perf.max_per_pipe_ib);
>
> - DPU_DEBUG("crtc=%d bus_id=%d bw=%llu\n",
> - tmp_crtc->base.id, bus_id,
> - dpu_cstate->new_perf.bw_ctl[bus_id]);
> + DPU_DEBUG("crtc=%d bw=%llu\n",
> + tmp_crtc->base.id, dpu_cstate->new_perf.bw_ctl);
> }
> }
> return ret;
> @@ -260,7 +243,6 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc)
> struct dpu_crtc *dpu_crtc;
> struct dpu_crtc_state *dpu_cstate;
> struct dpu_kms *kms;
> - int i;
>
> if (!crtc) {
> DPU_ERROR("invalid crtc\n");
> @@ -296,10 +278,8 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc)
> if (kms->perf.enable_bw_release) {
> trace_dpu_cmd_release_bw(crtc->base.id);
> DPU_DEBUG("Release BW crtc=%d\n", crtc->base.id);
> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
> - dpu_crtc->cur_perf.bw_ctl[i] = 0;
> - _dpu_core_perf_crtc_update_bus(kms, crtc, i);
> - }
> + dpu_crtc->cur_perf.bw_ctl = 0;
> + _dpu_core_perf_crtc_update_bus(kms, crtc);
> }
> }
>
> @@ -342,11 +322,10 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
> int params_changed, bool stop_req)
> {
> struct dpu_core_perf_params *new, *old;
> - int update_bus = 0, update_clk = 0;
> + bool update_bus = false, update_clk = false;
> u64 clk_rate = 0;
> struct dpu_crtc *dpu_crtc;
> struct dpu_crtc_state *dpu_cstate;
> - int i;
> struct msm_drm_private *priv;
> struct dpu_kms *kms;
> int ret;
> @@ -373,7 +352,6 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
> new = &dpu_cstate->new_perf;
>
> if (_dpu_core_perf_crtc_is_power_on(crtc) && !stop_req) {
> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
> /*
> * cases for bus bandwidth update.
> * 1. new bandwidth vote - "ab or ib vote" is higher
> @@ -381,23 +359,22 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
> * 2. new bandwidth vote - "ab or ib vote" is lower
> * than current vote at end of commit or stop.
> */
> - if ((params_changed && ((new->bw_ctl[i] >
> - old->bw_ctl[i]) ||
> - (new->max_per_pipe_ib[i] >
> - old->max_per_pipe_ib[i]))) ||
> - (!params_changed && ((new->bw_ctl[i] <
> - old->bw_ctl[i]) ||
> - (new->max_per_pipe_ib[i] <
> - old->max_per_pipe_ib[i])))) {
> + if ((params_changed && ((new->bw_ctl >
> + old->bw_ctl) ||
> + (new->max_per_pipe_ib >
> + old->max_per_pipe_ib))) ||
> + (!params_changed && ((new->bw_ctl <
> + old->bw_ctl) ||
> + (new->max_per_pipe_ib <
> + old->max_per_pipe_ib)))) {
You can condense this by joining some lines together. Bonus points if you can
simplify it further.
> DPU_DEBUG(
> "crtc=%d p=%d new_bw=%llu,old_bw=%llu\n",
> crtc->base.id, params_changed,
> - new->bw_ctl[i], old->bw_ctl[i]);
> - old->bw_ctl[i] = new->bw_ctl[i];
> - old->max_per_pipe_ib[i] =
> - new->max_per_pipe_ib[i];
> - update_bus |= BIT(i);
> - }
> + new->bw_ctl, old->bw_ctl);
> + old->bw_ctl = new->bw_ctl;
> + old->max_per_pipe_ib =
> + new->max_per_pipe_ib;
Fits on one line now
> + update_bus = true;
> }
>
> if ((params_changed &&
> @@ -405,30 +382,26 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
> (!params_changed &&
> (new->core_clk_rate < old->core_clk_rate))) {
> old->core_clk_rate = new->core_clk_rate;
> - update_clk = 1;
> + update_clk = true;
> }
> } else {
> DPU_DEBUG("crtc=%d disable\n", crtc->base.id);
> memset(old, 0, sizeof(*old));
> memset(new, 0, sizeof(*new));
> - update_bus = ~0;
> - update_clk = 1;
> + update_bus = true;
> + update_clk = true;
> }
> +
> trace_dpu_perf_crtc_update(crtc->base.id,
> - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC],
> - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC],
> - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI],
> - new->core_clk_rate, stop_req,
> - update_bus, update_clk);
> -
> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
> - if (update_bus & BIT(i)) {
> - ret = _dpu_core_perf_crtc_update_bus(kms, crtc, i);
> - if (ret) {
> - DPU_ERROR("crtc-%d: failed to update bw vote for bus-%d\n",
> - crtc->base.id, i);
> - return ret;
> - }
> + new->bw_ctl, new->core_clk_rate,
> + stop_req, update_bus, update_clk);
> +
> + if (update_bus) {
> + ret = _dpu_core_perf_crtc_update_bus(kms, crtc);
> + if (ret) {
> + DPU_ERROR("crtc-%d: failed to update bus bw vote\n",
> + crtc->base.id);
> + return ret;
> }
> }
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> index fbcbe0c7527a..0fb276929dc5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> @@ -30,8 +30,8 @@
> * @core_clk_rate: core clock rate request
> */
> struct dpu_core_perf_params {
> - u64 max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MAX];
> - u64 bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MAX];
> + u64 max_per_pipe_ib;
> + u64 bw_ctl;
> u64 core_clk_rate;
> };
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index c5ba753d441c..841476d77f5c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -1373,21 +1373,14 @@ static int dpu_crtc_debugfs_state_show(struct seq_file *s, void *v)
> {
> struct drm_crtc *crtc = (struct drm_crtc *) s->private;
> struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc);
> - int i;
>
> seq_printf(s, "client type: %d\n", dpu_crtc_get_client_type(crtc));
> seq_printf(s, "intf_mode: %d\n", dpu_crtc_get_intf_mode(crtc));
> seq_printf(s, "core_clk_rate: %llu\n",
> dpu_crtc->cur_perf.core_clk_rate);
> - for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC;
> - i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) {
> - seq_printf(s, "bw_ctl[%s]: %llu\n",
> - dpu_power_handle_get_dbus_name(i),
> - dpu_crtc->cur_perf.bw_ctl[i]);
> - seq_printf(s, "max_per_pipe_ib[%s]: %llu\n",
> - dpu_power_handle_get_dbus_name(i),
> - dpu_crtc->cur_perf.max_per_pipe_ib[i]);
> - }
> + seq_printf(s, "bw_ctl: %llu\n", dpu_crtc->cur_perf.bw_ctl);
> + seq_printf(s, "max_per_pipe_ib: %llu\n",
> + dpu_crtc->cur_perf.max_per_pipe_ib);
>
> return 0;
> }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c
> index fc14116789f2..d58d01544731 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c
> @@ -24,20 +24,6 @@
> #include "dpu_power_handle.h"
> #include "dpu_trace.h"
>
> -static const char *data_bus_name[DPU_POWER_HANDLE_DBUS_ID_MAX] = {
> - [DPU_POWER_HANDLE_DBUS_ID_MNOC] = "qcom,dpu-data-bus",
> - [DPU_POWER_HANDLE_DBUS_ID_LLCC] = "qcom,dpu-llcc-bus",
> - [DPU_POWER_HANDLE_DBUS_ID_EBI] = "qcom,dpu-ebi-bus",
> -};
> -
> -const char *dpu_power_handle_get_dbus_name(u32 bus_id)
> -{
> - if (bus_id < DPU_POWER_HANDLE_DBUS_ID_MAX)
> - return data_bus_name[bus_id];
> -
> - return NULL;
> -}
> -
> static void dpu_power_event_trigger_locked(struct dpu_power_handle *phandle,
> u32 event_type)
> {
> @@ -66,7 +52,6 @@ struct dpu_power_client *dpu_power_client_create(
>
> mutex_lock(&phandle->phandle_lock);
> strlcpy(client->name, client_name, MAX_CLIENT_NAME_LEN);
> - client->usecase_ndx = VOTE_INDEX_DISABLE;
> client->id = id;
> client->active = true;
> pr_debug("client %s created:%pK id :%d\n", client_name,
> @@ -143,8 +128,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> struct dpu_power_client *pclient, bool enable)
> {
> bool changed = false;
> - u32 max_usecase_ndx = VOTE_INDEX_DISABLE, prev_usecase_ndx;
> - struct dpu_power_client *client;
> u32 event_type;
>
> if (!phandle || !pclient) {
> @@ -153,31 +136,19 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle,
> }
>
> mutex_lock(&phandle->phandle_lock);
> - if (enable)
> + if (enable) {
> pclient->refcount++;
> - else if (pclient->refcount)
> + if (pclient->refcount == 1)
> + changed = true;
> + } else if (pclient->refcount) {
> pclient->refcount--;
> -
> - if (pclient->refcount)
> - pclient->usecase_ndx = VOTE_INDEX_LOW;
> - else
> - pclient->usecase_ndx = VOTE_INDEX_DISABLE;
> -
> - list_for_each_entry(client, &phandle->power_client_clist, list) {
> - if (client->usecase_ndx < VOTE_INDEX_MAX &&
> - client->usecase_ndx > max_usecase_ndx)
> - max_usecase_ndx = client->usecase_ndx;
> - }
> -
> - if (phandle->current_usecase_ndx != max_usecase_ndx) {
> - changed = true;
> - prev_usecase_ndx = phandle->current_usecase_ndx;
> - phandle->current_usecase_ndx = max_usecase_ndx;
> + if (!pclient->refcount)
> + changed = true;
> }
>
> - pr_debug("%pS: changed=%d current idx=%d request client %s id:%u enable:%d refcount:%d\n",
> - __builtin_return_address(0), changed, max_usecase_ndx,
> - pclient->name, pclient->id, enable, pclient->refcount);
> + pr_debug("%pS:changed=%d client %s id:%u enable:%d refcount:%d\n",
> + __builtin_return_address(0), changed, pclient->name,
> + pclient->id, enable, pclient->refcount);
>
> if (!changed)
> goto end;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h
> index a65b7a297f21..b1a5ae4d6f4e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h
> @@ -16,76 +16,28 @@
>
> #define MAX_CLIENT_NAME_LEN 128
>
> -#define DPU_POWER_HANDLE_ENABLE_BUS_AB_QUOTA 0
> -#define DPU_POWER_HANDLE_DISABLE_BUS_AB_QUOTA 0
> -#define DPU_POWER_HANDLE_ENABLE_BUS_IB_QUOTA 1600000000
> -#define DPU_POWER_HANDLE_DISABLE_BUS_IB_QUOTA 0
> -
> #include "dpu_io_util.h"
>
> /* events will be triggered on power handler enable/disable */
> #define DPU_POWER_EVENT_DISABLE BIT(0)
> #define DPU_POWER_EVENT_ENABLE BIT(1)
>
> -/**
> - * mdss_bus_vote_type: register bus vote type
> - * VOTE_INDEX_DISABLE: removes the client vote
> - * VOTE_INDEX_LOW: keeps the lowest vote for register bus
> - * VOTE_INDEX_MAX: invalid
> - */
> -enum mdss_bus_vote_type {
> - VOTE_INDEX_DISABLE,
> - VOTE_INDEX_LOW,
> - VOTE_INDEX_MAX,
> -};
> -
> -/**
> - * enum dpu_power_handle_data_bus_client - type of axi bus clients
> - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_RT: core real-time bus client
> - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_NRT: core non-real-time bus client
> - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX: maximum number of bus client type
> - */
> -enum dpu_power_handle_data_bus_client {
> - DPU_POWER_HANDLE_DATA_BUS_CLIENT_RT,
> - DPU_POWER_HANDLE_DATA_BUS_CLIENT_NRT,
> - DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX
> -};
> -
> -/**
> - * enum DPU_POWER_HANDLE_DBUS_ID - data bus identifier
> - * @DPU_POWER_HANDLE_DBUS_ID_MNOC: DPU/MNOC data bus
> - * @DPU_POWER_HANDLE_DBUS_ID_LLCC: MNOC/LLCC data bus
> - * @DPU_POWER_HANDLE_DBUS_ID_EBI: LLCC/EBI data bus
> - */
> -enum DPU_POWER_HANDLE_DBUS_ID {
> - DPU_POWER_HANDLE_DBUS_ID_MNOC,
> - DPU_POWER_HANDLE_DBUS_ID_LLCC,
> - DPU_POWER_HANDLE_DBUS_ID_EBI,
> - DPU_POWER_HANDLE_DBUS_ID_MAX,
> -};
> -
> /**
> * struct dpu_power_client: stores the power client for dpu driver
> * @name: name of the client
> - * @usecase_ndx: current regs bus vote type
> * @refcount: current refcount if multiple modules are using same
> * same client for enable/disable. Power module will
> * aggregate the refcount and vote accordingly for this
> * client.
> * @id: assigned during create. helps for debugging.
> * @list: list to attach power handle master list
> - * @ab: arbitrated bandwidth for each bus client
> - * @ib: instantaneous bandwidth for each bus client
> * @active: inidcates the state of dpu power handle
> */
> struct dpu_power_client {
> char name[MAX_CLIENT_NAME_LEN];
> - short usecase_ndx;
> short refcount;
> u32 id;
> struct list_head list;
> - u64 ab[DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX];
> - u64 ib[DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX];
> bool active;
> };
>
> @@ -112,14 +64,12 @@ struct dpu_power_event {
> * @client_clist: master list to store all clients
> * @phandle_lock: lock to synchronize the enable/disable
> * @dev: pointer to device structure
> - * @usecase_ndx: current usecase index
> * @event_list: current power handle event list
> */
> struct dpu_power_handle {
> struct list_head power_client_clist;
> struct mutex phandle_lock;
> struct device *dev;
> - u32 current_usecase_ndx;
> struct list_head event_list;
> };
>
> @@ -172,17 +122,6 @@ void dpu_power_client_destroy(struct dpu_power_handle *phandle,
> int dpu_power_resource_enable(struct dpu_power_handle *pdata,
> struct dpu_power_client *pclient, bool enable);
>
> -/**
> - * dpu_power_data_bus_bandwidth_ctrl() - control data bus bandwidth enable
> - * @phandle: power handle containing the resources
> - * @client: client information to bandwidth control
> - * @enable: true to enable bandwidth for data base
> - *
> - * Return: none
> - */
> -void dpu_power_data_bus_bandwidth_ctrl(struct dpu_power_handle *phandle,
> - struct dpu_power_client *pclient, int enable);
> -
> /**
> * dpu_power_handle_register_event - register a callback function for an event.
> * Clients can register for multiple events with a single register.
> @@ -207,11 +146,4 @@ struct dpu_power_event *dpu_power_handle_register_event(
> void dpu_power_handle_unregister_event(struct dpu_power_handle *phandle,
> struct dpu_power_event *event);
>
> -/**
> - * dpu_power_handle_get_dbus_name - get name of given data bus identifier
> - * @bus_id: data bus identifier
> - * Return: Pointer to name string if success; NULL otherwise
> - */
> -const char *dpu_power_handle_get_dbus_name(u32 bus_id);
> -
> #endif /* _DPU_POWER_HANDLE_H_ */
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h
> index 0c122e173892..f5ed47a1556a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h
> @@ -167,16 +167,13 @@ TRACE_EVENT(dpu_trace_counter,
> )
>
> TRACE_EVENT(dpu_perf_crtc_update,
> - TP_PROTO(u32 crtc, u64 bw_ctl_mnoc, u64 bw_ctl_llcc,
> - u64 bw_ctl_ebi, u32 core_clk_rate,
> - bool stop_req, u32 update_bus, u32 update_clk),
> - TP_ARGS(crtc, bw_ctl_mnoc, bw_ctl_llcc, bw_ctl_ebi, core_clk_rate,
> + TP_PROTO(u32 crtc, u64 bw_ctl, u32 core_clk_rate,
> + bool stop_req, bool update_bus, bool update_clk),
> + TP_ARGS(crtc, bw_ctl, core_clk_rate,
> stop_req, update_bus, update_clk),
> TP_STRUCT__entry(
> __field(u32, crtc)
> - __field(u64, bw_ctl_mnoc)
> - __field(u64, bw_ctl_llcc)
> - __field(u64, bw_ctl_ebi)
> + __field(u64, bw_ctl)
> __field(u32, core_clk_rate)
> __field(bool, stop_req)
> __field(u32, update_bus)
> @@ -184,20 +181,16 @@ TRACE_EVENT(dpu_perf_crtc_update,
> ),
> TP_fast_assign(
> __entry->crtc = crtc;
> - __entry->bw_ctl_mnoc = bw_ctl_mnoc;
> - __entry->bw_ctl_llcc = bw_ctl_llcc;
> - __entry->bw_ctl_ebi = bw_ctl_ebi;
> + __entry->bw_ctl = bw_ctl;
> __entry->core_clk_rate = core_clk_rate;
> __entry->stop_req = stop_req;
> __entry->update_bus = update_bus;
> __entry->update_clk = update_clk;
> ),
> TP_printk(
> - "crtc=%d bw_mnoc=%llu bw_llcc=%llu bw_ebi=%llu clk_rate=%u stop_req=%d u_bus=%d u_clk=%d",
> + "crtc=%d bw_ctl=%llu clk_rate=%u stop_req=%d u_bus=%d u_clk=%d",
> __entry->crtc,
> - __entry->bw_ctl_mnoc,
> - __entry->bw_ctl_llcc,
> - __entry->bw_ctl_ebi,
> + __entry->bw_ctl,
> __entry->core_clk_rate,
> __entry->stop_req,
> __entry->update_bus,
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
