Commit e6bcca0890b9 ("backlight: pwm_bl: Switch to using "atomic" PWM API")
removed the driver internal enabled tracking in favor of simply checking
the pwm state.
This can lead to issues as all of gpio-, regulator- and pwm-state are used
to determine the initial state and the bootloader or kernel can leave them
in an inconsistent state at boot.
In my case on rk3399-kevin, the pwm backlight is build as module and the
kernel disables the supply regulator as unused while keeping the pwm running
thus pwm_bl calling pwm_backlight_power_off() during probe and creating an
unmatched regulator-disable call, as it never got enabled from the pwm-bl
before.
To prevent these consistency issues, reintroduce the driver-internal
tracking of the enabled state.
Fixes: e6bcca0890b9 ("backlight: pwm_bl: Switch to using "atomic" PWM API")
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
drivers/video/backlight/pwm_bl.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 678b27063198..bcd08b41765d 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -30,6 +30,7 @@ struct pwm_bl_data {
struct device *dev;
unsigned int lth_brightness;
unsigned int *levels;
+ bool enabled;
struct regulator *power_supply;
struct gpio_desc *enable_gpio;
unsigned int scale;
@@ -50,7 +51,7 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb)
int err;
pwm_get_state(pb->pwm, &state);
- if (state.enabled)
+ if (pb->enabled)
return;
err = regulator_enable(pb->power_supply);
@@ -65,6 +66,8 @@ static void pwm_backlight_power_on(struct pwm_bl_data *pb)
if (pb->enable_gpio)
gpiod_set_value_cansleep(pb->enable_gpio, 1);
+
+ pb->enabled = true;
}
static void pwm_backlight_power_off(struct pwm_bl_data *pb)
@@ -72,7 +75,7 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
struct pwm_state state;
pwm_get_state(pb->pwm, &state);
- if (!state.enabled)
+ if (!pb->enabled)
return;
if (pb->enable_gpio)
@@ -86,6 +89,7 @@ static void pwm_backlight_power_off(struct pwm_bl_data *pb)
pwm_apply_state(pb->pwm, &state);
regulator_disable(pb->power_supply);
+ pb->enabled = false;
}
static int compute_duty_cycle(struct pwm_bl_data *pb, int brightness)
@@ -483,6 +487,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
pb->check_fb = data->check_fb;
pb->exit = data->exit;
pb->dev = &pdev->dev;
+ pb->enabled = false;
pb->post_pwm_on_delay = data->post_pwm_on_delay;
pb->pwm_off_delay = data->pwm_off_delay;
--
2.18.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
