On 11/7/18 1:10 PM, Rodrigo Vivi wrote:
> On Wed, Nov 07, 2018 at 04:56:00PM +0000, Kazlauskas, Nicholas wrote:
>> On 10/24/18 6:49 PM, Rodrigo Vivi wrote:
>>> On Fri, Oct 12, 2018 at 11:42:32AM -0700, Radhakrishna Sripada wrote:
>>>> At times 12bpc HDMI cannot be driven due to faulty cables, dongles
>>>> level shifters etc. To workaround them we may need to drive the output
>>>> at a lower bpc. Currently the user space does not have a way to limit
>>>> the bpc. The default bpc to be programmed is decided by the driver and
>>>> is run against connector limitations.
>>>>
>>>> Creating a new connector property "max bpc" in order to limit the bpc.
>>>> xrandr can make use of this connector property to make sure that bpc does
>>>> not exceed the configured value. This property can be used by userspace to
>>>> set the bpc.
>>>>
>>>> V2: Initialize max_bpc to satisfy kms_properties
>>>> V3: Move the property to drm_connector
>>>> V4: Split drm and i915 components(Ville)
>>>> V5: Make the property per connector(Ville)
>>>> V6: Compare the requested bpc to connector bpc(Daniel)
>>>> Move the attach_property function to core(Ville)
>>>> V7: Fix checkpatch warnings
>>>> V8: Simplify the connector check code(Ville)
>>>> V9: Const display_info(Ville)
>>>> V10,V11: Fix CI issues.
>>>> V12: Add the Kernel documentation(Daniel)
>>>> V14: Crossreference the function name in the doc(Daniel)
>>>>
>>>> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>>>> Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
>>>> Cc: Kishore Kadiyala <kishore.kadiyala@xxxxxxxxx>
>>>> Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
>>>> Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
>>>> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
>>>> Cc: Sunpeng Li <sunpeng.li@xxxxxxx>
>>>> Acked-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
>>>> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
>>
>> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
>
> Thanks. Although I had pushed through drm-intel-next-queued (dinq) already.
>
>>
>> Looks good to me. We're seeing similar issues with > 8bpc that this
>> would help with.
>
> hm... I hope that pushing to dinq doesn't cause any trouble for you :(
>
>>
>>>
>>> This patch looks right to me:
>>>
>>> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
>>>
>>> but we probably need to hold on merge while we wait clarifications
>>> and final rv-b on igt tests....
>>
>> Any updates on the igt tests?
>
> yeap, RK added the property tests. got reviewed and
> merged to igt already as well
>
> Thanks,
> Rodrigo.
Thanks for the update.
I think in the meantime while waiting for this to land in drm we'll make
use of a driver specific property with the same name and swap it out
later for the common property.
Nicholas Kazlauskas
>
>>
>>>
>>>> ---
>>>> drivers/gpu/drm/drm_atomic.c | 5 +++++
>>>> drivers/gpu/drm/drm_atomic_helper.c | 4 ++++
>>>> drivers/gpu/drm/drm_atomic_uapi.c | 4 ++++
>>>> drivers/gpu/drm/drm_connector.c | 41 +++++++++++++++++++++++++++++++++++++
>>>> include/drm/drm_connector.h | 20 ++++++++++++++++++
>>>> 5 files changed, 74 insertions(+)
>>>>
>>>> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
>>>> index 2870ae205237..cd8362dc4f74 100644
>>>> --- a/drivers/gpu/drm/drm_atomic.c
>>>> +++ b/drivers/gpu/drm/drm_atomic.c
>>>> @@ -390,6 +390,11 @@ static int drm_atomic_connector_check(struct drm_connector *connector,
>>>> {
>>>> struct drm_crtc_state *crtc_state;
>>>> struct drm_writeback_job *writeback_job = state->writeback_job;
>>>> + const struct drm_display_info *info = &connector->display_info;
>>>> +
>>>> + state->max_bpc = info->bpc ? info->bpc : 8;
>>>> + if (connector->max_bpc_property)
>>>> + state->max_bpc = min(state->max_bpc, state->max_requested_bpc);
>>>>
>>>> if ((connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK) || !writeback_job)
>>>> return 0;
>>>> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
>>>> index 6f66777dca4b..d61a74b254f5 100644
>>>> --- a/drivers/gpu/drm/drm_atomic_helper.c
>>>> +++ b/drivers/gpu/drm/drm_atomic_helper.c
>>>> @@ -650,6 +650,10 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
>>>> if (old_connector_state->link_status !=
>>>> new_connector_state->link_status)
>>>> new_crtc_state->connectors_changed = true;
>>>> +
>>>> + if (old_connector_state->max_requested_bpc !=
>>>> + new_connector_state->max_requested_bpc)
>>>> + new_crtc_state->connectors_changed = true;
>>>> }
>>>>
>>>> if (funcs->atomic_check)
>>>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
>>>> index a22d6f269b07..7492819c81ce 100644
>>>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>>>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>>>> @@ -761,6 +761,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
>>>>
>>>> return set_out_fence_for_connector(state->state, connector,
>>>> fence_ptr);
>>>> + } else if (property == connector->max_bpc_property) {
>>>> + state->max_requested_bpc = val;
>>>> } else if (connector->funcs->atomic_set_property) {
>>>> return connector->funcs->atomic_set_property(connector,
>>>> state, property, val);
>>>> @@ -825,6 +827,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
>>>> *val = 0;
>>>> } else if (property == config->writeback_out_fence_ptr_property) {
>>>> *val = 0;
>>>> + } else if (property == connector->max_bpc_property) {
>>>> + *val = state->max_requested_bpc;
>>>> } else if (connector->funcs->atomic_get_property) {
>>>> return connector->funcs->atomic_get_property(connector,
>>>> state, property, val);
>>>> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
>>>> index 5d01414ec9f7..bdaa29e530d4 100644
>>>> --- a/drivers/gpu/drm/drm_connector.c
>>>> +++ b/drivers/gpu/drm/drm_connector.c
>>>> @@ -932,6 +932,13 @@ DRM_ENUM_NAME_FN(drm_get_content_protection_name, drm_cp_enum_list)
>>>> * is no longer protected and userspace should take appropriate action
>>>> * (whatever that might be).
>>>> *
>>>> + * max bpc:
>>>> + * This range property is used by userspace to limit the bit depth. When
>>>> + * used the driver would limit the bpc in accordance with the valid range
>>>> + * supported by the hardware and sink. Drivers to use the function
>>>> + * drm_connector_attach_max_bpc_property() to create and attach the
>>>> + * property to the connector during initialization.
>>>> + *
>>>> * Connectors also have one standardized atomic property:
>>>> *
>>>> * CRTC_ID:
>>>> @@ -1600,6 +1607,40 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
>>>> EXPORT_SYMBOL(drm_connector_set_link_status_property);
>>>>
>>>> /**
>>>> + * drm_connector_attach_max_bpc_property - attach "max bpc" property
>>>> + * @connector: connector to attach max bpc property on.
>>>> + * @min: The minimum bit depth supported by the connector.
>>>> + * @max: The maximum bit depth supported by the connector.
>>>> + *
>>>> + * This is used to add support for limiting the bit depth on a connector.
>>>> + *
>>>> + * Returns:
>>>> + * Zero on success, negative errno on failure.
>>>> + */
>>>> +int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
>>>> + int min, int max)
>>>> +{
>>>> + struct drm_device *dev = connector->dev;
>>>> + struct drm_property *prop;
>>>> +
>>>> + prop = connector->max_bpc_property;
>>>> + if (!prop) {
>>>> + prop = drm_property_create_range(dev, 0, "max bpc", min, max);
>>>> + if (!prop)
>>>> + return -ENOMEM;
>>>> +
>>>> + connector->max_bpc_property = prop;
>>>> + }
>>>> +
>>>> + drm_object_attach_property(&connector->base, prop, max);
>>>> + connector->state->max_requested_bpc = max;
>>>> + connector->state->max_bpc = max;
>>>> +
>>>> + return 0;
>>>> +}
>>>> +EXPORT_SYMBOL(drm_connector_attach_max_bpc_property);
>>>> +
>>>> +/**
>>>> * drm_connector_init_panel_orientation_property -
>>>> * initialize the connecters panel_orientation property
>>>> * @connector: connector for which to init the panel-orientation property.
>>>> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
>>>> index 5b3cf909fd5e..a402d16427a1 100644
>>>> --- a/include/drm/drm_connector.h
>>>> +++ b/include/drm/drm_connector.h
>>>> @@ -461,6 +461,18 @@ struct drm_connector_state {
>>>> * drm_writeback_signal_completion()
>>>> */
>>>> struct drm_writeback_job *writeback_job;
>>>> +
>>>> + /**
>>>> + * @max_requested_bpc: Connector property to limit the maximum bit
>>>> + * depth of the pixels.
>>>> + */
>>>> + u8 max_requested_bpc;
>>>> +
>>>> + /**
>>>> + * @max_bpc: Connector max_bpc based on the requested max_bpc property
>>>> + * and the connector bpc limitations obtained from edid.
>>>> + */
>>>> + u8 max_bpc;
>>>> };
>>>>
>>>> /**
>>>> @@ -924,6 +936,12 @@ struct drm_connector {
>>>> */
>>>> struct drm_property_blob *path_blob_ptr;
>>>>
>>>> + /**
>>>> + * @max_bpc_property: Default connector property for the max bpc to be
>>>> + * driven out of the connector.
>>>> + */
>>>> + struct drm_property *max_bpc_property;
>>>> +
>>>> #define DRM_CONNECTOR_POLL_HPD (1 << 0)
>>>> #define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
>>>> #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
>>>> @@ -1202,6 +1220,8 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
>>>> uint64_t link_status);
>>>> int drm_connector_init_panel_orientation_property(
>>>> struct drm_connector *connector, int width, int height);
>>>> +int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
>>>> + int min, int max);
>>>>
>>>> /**
>>>> * struct drm_tile_group - Tile group metadata
>>>> --
>>>> 2.9.3
>>>>
>>>> _______________________________________________
>>>> Intel-gfx mailing list
>>>> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
>>>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>>> _______________________________________________
>>> dri-devel mailing list
>>> dri-devel@xxxxxxxxxxxxxxxxxxxxx
>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>>>
>>
>> Nicholas Kazlauska
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
