Re: [PATCH] drm/framebuffer: Expose only modifiers that support at least a format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2018-11-06 at 22:21 +0200, Ville Syrjälä wrote:
> On Tue, Nov 06, 2018 at 11:54:45AM -0800, Dhinakaran Pandiyan wrote:
> > On Tue, 2018-11-06 at 16:13 +0200, Ville Syrjälä wrote:
> > > On Mon, Nov 05, 2018 at 06:44:34PM -0800, Dhinakaran Pandiyan
> > > wrote:
> > > > Allows drivers to pass a larger modifier array, thereby
> > > > avoiding
> > > > declarations of static modifier arrays that are only slight
> > > > different
> > > > for each plane.
> > > > 
> > > > Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > Suggested-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > Signed-off-by: Dhinakaran Pandiyan <
> > > > dhinakaran.pandiyan@xxxxxxxxx>
> > > > ---
> > > >  drivers/gpu/drm/drm_plane.c | 35 +++++++++++++++++++++++++++
> > > > ----
> > > > ----
> > > >  1 file changed, 27 insertions(+), 8 deletions(-)
> > > > 
> > > > diff --git a/drivers/gpu/drm/drm_plane.c
> > > > b/drivers/gpu/drm/drm_plane.c
> > > > index 1fa98bd12003..1546ffbf8e36 100644
> > > > --- a/drivers/gpu/drm/drm_plane.c
> > > > +++ b/drivers/gpu/drm/drm_plane.c
> > > > @@ -179,8 +179,8 @@ int drm_universal_plane_init(struct
> > > > drm_device
> > > > *dev, struct drm_plane *plane,
> > > >  			     const char *name, ...)
> > > >  {
> > > >  	struct drm_mode_config *config = &dev->mode_config;
> > > > -	unsigned int format_modifier_count = 0;
> > > > -	int ret;
> > > > +	unsigned int format_modifier_count, in_modifier_count =
> > > > 0;
> > > > +	int ret, i;
> > > >  
> > > >  	/* plane index is used with 32bit bitmasks */
> > > >  	if (WARN_ON(config->num_total_plane >= 32))
> > > > @@ -216,22 +216,43 @@ int drm_universal_plane_init(struct
> > > > drm_device *dev, struct drm_plane *plane,
> > > >  
> > > >  	if (format_modifiers) {
> > > >  		const uint64_t *temp_modifiers =
> > > > format_modifiers;
> > > > +
> > > >  		while (*temp_modifiers++ !=
> > > > DRM_FORMAT_MOD_INVALID)
> > > > -			format_modifier_count++;
> > > > +			in_modifier_count++;
> > > >  	}
> > > >  
> > > > -	plane->modifier_count = format_modifier_count;
> > > > -	plane->modifiers = kmalloc_array(format_modifier_count,
> > > > +	plane->modifiers = kmalloc_array(in_modifier_count,
> > > >  					 sizeof(format_modifier
> > > > s[0]),
> > > >  					 GFP_KERNEL);
> > > >  
> > > > -	if (format_modifier_count && !plane->modifiers) {
> > > > +	if (in_modifier_count && !plane->modifiers) {
> > > >  		DRM_DEBUG_KMS("out of memory when allocating
> > > > plane\n");
> > > >  		kfree(plane->format_types);
> > > >  		drm_mode_object_unregister(dev, &plane->base);
> > > >  		return -ENOMEM;
> > > >  	}
> > > >  
> > > > +	for (i = 0, format_modifier_count = 0; i <
> > > > in_modifier_count;
> > > > i++) {
> > > > +		int j;
> > > > +
> > > > +		for (j = 0; funcs->format_mod_supported && j <
> > > > format_count; j++)
> > > > +			if (funcs->format_mod_supported(plane,
> > > > formats[j],
> > > > +							format_
> > > > modifier
> > > > s[i]))
> > > > +				break;
> > > > +
> > > > +		if (j < format_count)
> > > > +			plane-
> > > > >modifiers[format_modifier_count++] =
> > > > +				format_modifiers[i];
> > > > +	}
> > > > +
> > > > +	if (format_modifier_count < in_modifier_count) {
> > > > +		size_t size;
> > > > +
> > > > +		size = format_modifier_count *
> > > > sizeof(format_modifiers[0]);
> > > > +		plane->modifiers = krealloc(plane->modifiers,
> > > > size,
> > > > GFP_KERNEL);
> > > 
> > > Should check that the realloc actually succeeded.
> > 
> > Didn't see a failure path for new size smaller than old, the return
> > is
> > the same pointer passed to krealloc().
> 
> I don't know if we want to rely on an implementation detail that
> hevily.
Fair enough.

>  But that does raise the interesting point that trying to
> shrink our memory footprint with krealloc() is futile. I suppose
> there is still some kind of debugging benefit from the kasan
> stuff.
> 
> > 
> > > 
> > > And I think we might want to give this same treatment to plane-
> > > > formats[]
> > > 
> > > as well.
> > > 
> > > And perhaps we could even throw out plane->modifiers[] and just
> > > rely
> > > on
> > > the IN_FORMATS blob exclusively? Hmm. Looks like that is not
> > > getting
> > > fully
> > > populated unless the driver has provided .format_mod_supported().
> > > Not
> > > sure why that is, and not sure what userspace is supposed to do
> > > with
> > > a
> > > partially filled blob like that. I'm thinking we shouldn't even
> > > attach
> > > the property to the plane in that case.
> > 
> > Shouldn't it copy the modifier array into the blob and mark all
> > formats
> > as supported? drm_plane_check_pixel_format() seems to allow any
> > valid
> > format for a modifier in this case.
> 
> Yeah, I guess that might be the better approach.
I'll go with approach in the next version.

-DK
> 

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux