The previous version made it necessary to first generate an
EDID data set without correct CRC and then to fix the CRC in
a second step. This patch adds the CRC calculation to the
makefile in such a way that a correct EDID data set is generated
in a single build step. Successfully tested with all existing
and a couple of new data sets.
Signed-off-by: Christoph Niedermaier <cniedermaier@xxxxxxxxxxxxxxxxx>
Reviewed-by: Carsten Emde <C.Emde@xxxxxxxxx>
---
Documentation/EDID/1024x768.S | 1 -
Documentation/EDID/1280x1024.S | 1 -
Documentation/EDID/1600x1200.S | 1 -
Documentation/EDID/1680x1050.S | 1 -
Documentation/EDID/1920x1080.S | 1 -
Documentation/EDID/800x600.S | 1 -
Documentation/EDID/HOWTO.txt | 9 ---------
Documentation/EDID/Makefile | 15 +++++++++++++--
8 files changed, 13 insertions(+), 17 deletions(-)
diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S
index ff4013e..4aed3f9 100644
--- a/Documentation/EDID/1024x768.S
+++ b/Documentation/EDID/1024x768.S
@@ -39,6 +39,5 @@
#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */
#define HSYNC_POL 0
#define VSYNC_POL 0
-#define CRC 0x55
#include "edid.S"
diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S
index ce0e85b..b26dd42 100644
--- a/Documentation/EDID/1280x1024.S
+++ b/Documentation/EDID/1280x1024.S
@@ -39,6 +39,5 @@
/* No ESTABLISHED_TIMINGx_BITS */
#define HSYNC_POL 1
#define VSYNC_POL 1
-#define CRC 0xa0
#include "edid.S"
diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S
index 5eeb751..0d091b2 100644
--- a/Documentation/EDID/1600x1200.S
+++ b/Documentation/EDID/1600x1200.S
@@ -39,6 +39,5 @@
/* No ESTABLISHED_TIMINGx_BITS */
#define HSYNC_POL 1
#define VSYNC_POL 1
-#define CRC 0x9d
#include "edid.S"
diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S
index ec67950..7dfed9a 100644
--- a/Documentation/EDID/1680x1050.S
+++ b/Documentation/EDID/1680x1050.S
@@ -39,6 +39,5 @@
/* No ESTABLISHED_TIMINGx_BITS */
#define HSYNC_POL 1
#define VSYNC_POL 1
-#define CRC 0x26
#include "edid.S"
diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S
index e0657af..d6ffbba 100644
--- a/Documentation/EDID/1920x1080.S
+++ b/Documentation/EDID/1920x1080.S
@@ -39,6 +39,5 @@
/* No ESTABLISHED_TIMINGx_BITS */
#define HSYNC_POL 1
#define VSYNC_POL 1
-#define CRC 0x05
#include "edid.S"
diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S
index b6853b2..a561658 100644
--- a/Documentation/EDID/800x600.S
+++ b/Documentation/EDID/800x600.S
@@ -36,6 +36,5 @@
#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */
#define HSYNC_POL 1
#define VSYNC_POL 1
-#define CRC 0xc2
#include "edid.S"
diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt
index 7d05a7d..539871c 100644
--- a/Documentation/EDID/HOWTO.txt
+++ b/Documentation/EDID/HOWTO.txt
@@ -47,12 +47,3 @@ EDID:
#define YBLANK vtotal-vdisp
#define YOFFSET vsyncstart-vdisp
#define YPULSE vsyncend-vsyncstart
-
-The CRC value in the last line
- #define CRC 0x55
-also is a bit tricky. After a first version of the binary data set is
-created, it must be checked with the "edid-decode" utility which will
-most probably complain about a wrong CRC. Fortunately, the utility also
-displays the correct CRC which must then be inserted into the source
-file. After the make procedure is repeated, the EDID data set is ready
-to be used.
diff --git a/Documentation/EDID/Makefile b/Documentation/EDID/Makefile
index 17763ca..85a927d 100644
--- a/Documentation/EDID/Makefile
+++ b/Documentation/EDID/Makefile
@@ -15,10 +15,21 @@ clean:
%.o: %.S
@cc -c $^
-%.bin: %.o
+%.bin.nocrc: %.o
@objcopy -Obinary $^ $@
-%.bin.ihex: %.o
+%.crc: %.bin.nocrc
+ @list=$$(for i in `seq 1 127`; do head -c$$i $^ | tail -c1 \
+ | hexdump -v -e '/1 "%02X+"'; done); \
+ echo "ibase=16;100-($${list%?})%100" | bc >$@
+
+%.p: %.crc %.S
+ @cc -c -DCRC="$$(cat $*.crc)" -o $@ $*.S
+
+%.bin: %.p
+ @objcopy -Obinary $^ $@
+
+%.bin.ihex: %.p
@objcopy -Oihex $^ $@
@dos2unix $@ 2>/dev/null
--
2.1.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
