+amdgfx, amdgpu specific patches should go here
On 2018-11-05 05:33 AM, Shaokun Zhang wrote:
> RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x'
> prefix, which is somewhat misleading.
>
> Fix it to print hexadecimal, as was intended.
>
> Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.")
> Cc: Charlene Liu <charlene.liu@xxxxxxx>
> Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@xxxxxxx>
> Cc: Leo Li <sunpeng.li@xxxxxxx>
> Signed-off-by: Shaokun Zhang <zhangshaokun@xxxxxxxxxxxxx>
Reviewed-by: Leo Li <sunpeng.li@xxxxxxx>
Thanks!
Leo
> ---
> drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
> index fb04a4a..5da2186 100644
> --- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
> +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
> @@ -1722,7 +1722,7 @@ static void write_i2c_retimer_setting(
> i2c_success = i2c_write(pipe_ctx, slave_address,
> buffer, sizeof(buffer));
> RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\
> - offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n",
> + offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
> slave_address, buffer[0], buffer[1], i2c_success?1:0);
> if (!i2c_success)
> /* Write failure */
> @@ -1734,7 +1734,7 @@ static void write_i2c_retimer_setting(
> i2c_success = i2c_write(pipe_ctx, slave_address,
> buffer, sizeof(buffer));
> RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\
> - offset = 0x%d, reg_val = 0x%d, i2c_success = %d\n",
> + offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n",
> slave_address, buffer[0], buffer[1], i2c_success?1:0);
> if (!i2c_success)
> /* Write failure */
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
