Re: [PATCH v3 14/25] drm/sun4i: sun6i_mipi_dsi: Increase hfp packet overhead

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 29, 2018 at 07:57:56PM +0530, Jagan Teki wrote:
> On Mon, Oct 29, 2018 at 2:58 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
> >
> > On Fri, Oct 26, 2018 at 08:13:33PM +0530, Jagan Teki wrote:
> > > Increase the hfp packet overhead with another 10 bytes, the extra
> > > 10 bytes(which is hblk packet overhead) is adding for hfp packet
> > > overhead since hfp depends on hblk.
> > >
> > > This is truely as per BSP code from BPI-M64-bsp.
> > > The real computation from BSP is
> > > (in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
> > > dsi_hbp = (hbp-hspw)*dsi_pixel_bits[format]/8 - (4+2);
> > > dsi_hact = x * dsi_pixel_bits[format]/8;
> > > dsi_hblk = (ht-hspw)*dsi_pixel_bits[format]/8-(4+4+2);
> > > dsi_hfp = dsi_hblk - (4+dsi_hact+2) - (4+dsi_hbp+2);
> > >
> > > Example,
> > > u32 fmt = dsi_pixel_bits[format]/8;
> > > => ((ht-hspw)*fmt - 10) - (6 + x * fmt) - (6 + (hbp-hspw)*fmt - 6)
> > > => (ht - hspw - x - (hbp - hspw)) * fmt - 16
> > > => (ht - x - hbp) * fmt - 16
> > > => (ht - x - (timmings->hor_total_time - timmings->hor_front_porch - x)
> > > * fmt - 16
> > > => (timmings->hor_total_time - x - timmings->hor_total_time +
> > > timmings->hor_front_porch + x) * fmt - 16
> > > => timmings->hor_front_porch * fmt - 16
> > >
> > > So, increase the DSI hfp packet overhead by hblk packet overhead.
> > >
> > > Tested on 2-lane, 4-lane MIPI-DSI LCD panels.
> > >
> > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > > Tested-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > > ---
> > > Changes for v3:
> > > - new patch
> > > Changes for v2:
> > > - none
> > >
> > >  drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 22 +++++++++++++---------
> > >  1 file changed, 13 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > index 6584b51736a9..20e330186b7f 100644
> > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > > @@ -461,7 +461,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> > >  {
> > >       struct mipi_dsi_device *device = dsi->device;
> > >       unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
> > > -     u16 hbp, hfp, hsa, hblk_max, hblk, vblk;
> > > +     u16 hbp, hfp_pkt_overhead, hfp, hsa, hblk_max, hblk, vblk;
> > >       size_t bytes;
> > >       u8 *buffer;
> > >
> > > @@ -484,14 +484,6 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> > >       hbp = max((unsigned int)HBP_PACKET_OVERHEAD,
> > >                 (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD);
> > >
> > > -     /*
> > > -      * The frontporch is set using a blanking packet (4 bytes +
> > > -      * payload + 2 bytes). Its minimal size is therefore 6 bytes
> > > -      */
> > > -#define HFP_PACKET_OVERHEAD  6
> > > -     hfp = max((unsigned int)HFP_PACKET_OVERHEAD,
> > > -               (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD);
> > > -
> > >       /*
> > >        * hblk seems to be the line + porches length.
> > >        * The blank is set using a blanking packet (4 bytes + 4 bytes +
> > > @@ -502,6 +494,18 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> > >       hblk_max -= HBLK_PACKET_OVERHEAD;
> > >       hblk = max((unsigned int)HBLK_PACKET_OVERHEAD, hblk_max);
> > >
> > > +     /*
> > > +      * The frontporch is set using a blanking packet (4 bytes +
> > > +      * payload + 2 bytes). Its minimal size is therefore 6 bytes
> > > +      *
> > > +      * According to BSP code, extra 10 bytes(which is hblk packet overhead)
> > > +      * is adding for hfp packet overhead since hfp depends on hblk.
> >
> > "According to the BSP code, another 10 bytes (the HBLK packet
> > overhead) need to be added to the front porch overhead."
> >
> > How has this been verified? Since we have registers to set all the
> > parameters, this seems kind of weird.
> 
> Verified based on the BSP calculation which I explained in commit
> message and tested by validating these numbers with mainline vs bsp
> code.

So, not verified?

Did you have a panel that was broken due to this? Have you found that
the timings output on the DSI bus were wrong using an oscilloscope or
an analyzer? What makes you say that the Allwinner code is more
correct than we are?

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux