This series support MIPI-DSI Burst mode on Allwinner platform, which is tested in burst supported panel in Pine64-LTS board. Series depends on previous A64 MIPI-DSI series[1] and all changes are available in [2] repo with WIPI-A64-DSI branch. Any inputs, Jagan. [2] https://github.com/amarula/linux-amarula [1] https://patchwork.kernel.org/cover/10657467/ Jagan Teki (10): drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction delay drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings drm/sun4i: sun6i_mipi_dsi: Setup burst mode drm/sun4i: sun6i_mipi_dsi: Enable burst mode drm/sun4i: sun6i_mipi_dsi: Enable 2byte trail for 4-lane burst mode drm/sun4i: sun6i_mipi_dsi: Enable burst mode HBP, HSA_HSE dt-bindings: panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel [DO NOT MERGE] arm64: allwinner: a64: pine64-lts: Enable Feiyang FY07024DI26A30-D DSI panel .../display/panel/feiyang,fy07024di26a30d.txt | 20 ++ .../dts/allwinner/sun50i-a64-pine64-lts.dts | 37 +++ drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../drm/panel/panel-feiyang-fy07024di26a30d.c | 305 ++++++++++++++++++ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 186 +++++++---- 6 files changed, 500 insertions(+), 58 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c -- 2.18.0.321.gffc6fa0e3 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
