hblk is adding line with all porch timing values, or timings values from htotal without sync time. Current driver is subtracting htotal with hsa, but the hsa is bounded with packet overhead. For real hblk calculation needed by subtracting htotal with back and front porch values and BSP code BPI-M64-bsp is eventually following the same. BPI-M64-bsp is computing hbp as (in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) dsi_hblk = (ht-hspw)*dsi_pixel_bits[format]/8-(4+4+2); => (timmings->hor_total_time - timmings->hor_sync_time) => (mode->htotal - (mode->hsync_end - mode->hsync_start)) So, update the DSI hblk timing accordingly. Tested on 2-lane, 4-lane MIPI-DSI LCD panels. Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> Tested-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> --- Changes for v3: - new patch Changes for v2: - none drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 78bad71045ca..596e560263bf 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -495,7 +495,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, /* * hblk seems to be the line + porches length. */ - hblk = mode->htotal * Bpp - hsa; + hblk = (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp; /* * And I'm not entirely sure what vblk is about. The driver in -- 2.18.0.321.gffc6fa0e3 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
