Manual noted to use PLL_MIPI rate 500MHz to 1.4GHz,
but lowering the min rate by 300MHz can result proper
working nkms divider with the help of desired dclock
rate from panel driver.
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
Acked-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Tested-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
Changes for v3:
- collect Stephen Ack
- add tested credit
Changes for v2:
- none
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 019d67bf97c4..5a3a5b821f8b 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -167,6 +167,8 @@ static struct ccu_nkm pll_mipi_clk = {
.n = _SUNXI_CCU_MULT(8, 4),
.k = _SUNXI_CCU_MULT_MIN(4, 2, 2),
.m = _SUNXI_CCU_DIV(0, 4),
+ .min_rate = 300000000, /* Actual rate is 500MHz */
+ .max_rate = 1400000000UL,
.common = {
.reg = 0x040,
.hw.init = CLK_HW_INIT("pll-mipi", "pll-video0",
--
2.18.0.321.gffc6fa0e3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
