On Wed, Oct 24, 2018 at 11:36 PM Maxime Ripard
<maxime.ripard@xxxxxxxxxxx> wrote:
>
> On Tue, Oct 23, 2018 at 09:20:24PM +0530, Jagan Teki wrote:
> > The MIPI DSI controller on Allwinner A64 is similar to
> > Allwinner A31 without support of DSI mod clock(CLK_DSI_SCLK)
> >
> > So, alter has_mod_clk bool via driver data for respective
> > SoC's compatible.
> >
> > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > ---
> > Changes for v2:
> > - none
> >
> > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 47 ++++++++++++++++++++------
> > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 5 +++
> > 2 files changed, 41 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > index e3b34a345546..8e9c76febca2 100644
> > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> > @@ -10,6 +10,7 @@
> > #include <linux/component.h>
> > #include <linux/crc-ccitt.h>
> > #include <linux/of_address.h>
> > +#include <linux/of_device.h>
> > #include <linux/pm_runtime.h>
> > #include <linux/regmap.h>
> > #include <linux/reset.h>
> > @@ -981,6 +982,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
> > dsi->host.ops = &sun6i_dsi_host_ops;
> > dsi->host.dev = dev;
> >
> > + dsi->variant = of_device_get_match_data(dev);
> > +
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > base = devm_ioremap_resource(dev, res);
> > if (IS_ERR(base)) {
> > @@ -1001,17 +1004,20 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
> > return PTR_ERR(dsi->reset);
> > }
> >
> > - dsi->mod_clk = devm_clk_get(dev, "mod");
> > - if (IS_ERR(dsi->mod_clk)) {
> > - dev_err(dev, "Couldn't get the DSI mod clock\n");
> > - return PTR_ERR(dsi->mod_clk);
> > + if (dsi->variant->has_mod_clk) {
> > + dsi->mod_clk = devm_clk_get(dev, "mod");
> > + if (IS_ERR(dsi->mod_clk)) {
> > + dev_err(dev, "Couldn't get the DSI mod clock\n");
> > + return PTR_ERR(dsi->mod_clk);
> > + }
> > }
> >
> > /*
> > * In order to operate properly, that clock seems to be always
> > * set to 297MHz.
> > */
> > - clk_set_rate_exclusive(dsi->mod_clk, 297000000);
> > + if (dsi->variant->has_mod_clk)
> > + clk_set_rate_exclusive(dsi->mod_clk, 297000000);
> >
> > dphy_node = of_parse_phandle(dev->of_node, "phys", 0);
> > ret = sun6i_dphy_probe(dsi, dphy_node);
> > @@ -1043,7 +1049,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
> > pm_runtime_disable(dev);
> > sun6i_dphy_remove(dsi);
> > err_unprotect_clk:
> > - clk_rate_exclusive_put(dsi->mod_clk);
> > + if (dsi->variant->has_mod_clk)
> > + clk_rate_exclusive_put(dsi->mod_clk);
> > return ret;
> > }
> >
> > @@ -1056,7 +1063,8 @@ static int sun6i_dsi_remove(struct platform_device *pdev)
> > mipi_dsi_host_unregister(&dsi->host);
> > pm_runtime_disable(dev);
> > sun6i_dphy_remove(dsi);
> > - clk_rate_exclusive_put(dsi->mod_clk);
> > + if (dsi->variant->has_mod_clk)
> > + clk_rate_exclusive_put(dsi->mod_clk);
> >
> > return 0;
> > }
> > @@ -1066,7 +1074,8 @@ static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev)
> > struct sun6i_dsi *dsi = dev_get_drvdata(dev);
> >
> > reset_control_deassert(dsi->reset);
> > - clk_prepare_enable(dsi->mod_clk);
> > + if (dsi->variant->has_mod_clk)
> > + clk_prepare_enable(dsi->mod_clk);
> >
> > /*
> > * Enable the DSI block.
> > @@ -1094,7 +1103,8 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev)
> > {
> > struct sun6i_dsi *dsi = dev_get_drvdata(dev);
> >
> > - clk_disable_unprepare(dsi->mod_clk);
> > + if (dsi->variant->has_mod_clk)
> > + clk_disable_unprepare(dsi->mod_clk);
> > reset_control_assert(dsi->reset);
> >
> > return 0;
> > @@ -1106,9 +1116,24 @@ static const struct dev_pm_ops sun6i_dsi_pm_ops = {
> > NULL)
> > };
> >
> > +static const struct sun6i_dsi_variant sun6i_a31_dsi = {
> > + .has_mod_clk = true,
> > +};
> > +
> > +static const struct sun6i_dsi_variant sun50i_a64_dsi = {
> > + .has_mod_clk = false,
>
> This is the default already.
True but we need to assign the .data. how about checking device
compatible? I'm thinking of difference in driver data in future
between SoC's
>
> > +};
> > +
> > static const struct of_device_id sun6i_dsi_of_table[] = {
> > - { .compatible = "allwinner,sun6i-a31-mipi-dsi" },
> > - { }
> > + {
> > + .compatible = "allwinner,sun6i-a31-mipi-dsi",
> > + .data = &sun6i_a31_dsi,
> > + },
> > + {
> > + .compatible = "allwinner,sun50i-a64-mipi-dsi",
> > + .data = &sun50i_a64_dsi,
> > + },
> > + { /* sentinel */ }
> > };
> > MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table);
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> > index dbbc5b3ecbda..597b62227019 100644
> > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
> > @@ -20,6 +20,10 @@ struct sun6i_dphy {
> > struct reset_control *reset;
> > };
> >
> > +struct sun6i_dsi_variant {
> > + bool has_mod_clk;
> > +};
> > +
>
> This should be part of a separate patch.
How come, because has_mod_clk is using in driver file?
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
