Bananapi S070WV20-CT16 ICN6211 is 800x480, 4-lane MIPI-DSI to RGB bridge panel, the same panel PCB comes with parallel RBG which is supported via panel-simple driver with "bananapi,s070wv20-ct16" compatible. But this binding is specific for MIPI DSI to RGB bridge panels, which usually accessed using MIPI DSI controller driver. for information: - "bananapi,s070wv20-ct16" compatible for parallel RGB panels - "bananapi,s070wv20-ct16-icn6211" compatible for MIPI-DSI to RGB bridge panels Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> --- Changes for v2: - Add detailed commit message - Update the bindings as MIPI-DSI to RGB bridge .../panel/bananapi,s070wv20-ct16-icn6211.txt | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16-icn6211.txt diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16-icn6211.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16-icn6211.txt new file mode 100644 index 000000000000..68a89b6feaee --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16-icn6211.txt @@ -0,0 +1,21 @@ +Bananapi S070WV20-CT16 ICN6211 MIPI-DSI to RGB bridge + +Required properties: +- compatible: must be "bananapi,s070wv20-ct16-icn6211" +- reg: DSI virtual channel used by that screen +- avdd-supply: analog regulator dc1 switch +- dvdd-supply: 3v3 digital regulator +- reset-gpios: a GPIO phandle for the reset pin + +Optional properties: +- backlight: phandle for the backlight control. + +Example: +panel@0 { + compatible = "bananapi,s070wv20-ct16-icn6211"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dldo1>; + reset-gpios = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + backlight = <&backlight_dsi>; +}; -- 2.18.0.321.gffc6fa0e3 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel