Re: [linux-sunxi] [PATCH v2 04/29] clk: sunxi-ng: h6: Set video PLLs limits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sunday 07 October 2018 03:08 PM, Jernej Skrabec wrote:
Video PLL factors can be set in a way that final PLL rate is outside
stable range. H6 user manual specifically says that N factor should not
be below 12. While it doesn't says anything about maximum stable rate, it

Manual says "In application, PLL_FACTOR_N should be more than or equal to 11" can't it be 11?

is clear that PLL doesn't work at 6.096 GHz (254 * 24 MHz).

Set minimum allowed PLL video rate to 288 MHz (12 * 24 MHz) and maximum
to 2.4 GHz, which is maximum in BSP driver.

Is this max freq from here [1]

[1] https://github.com/Allwinner-Homlet/H6-BSP4.9-linux/blob/master/drivers/clk/sunxi/clk-sun50iw6.c#L164

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux