On Fri, 12 Oct 2018 07:35:57 +0000 "Koenig, Christian" <Christian.Koenig@xxxxxxx> wrote: > Am 12.10.2018 um 09:23 schrieb Pekka Paalanen: > > On Wed, 10 Oct 2018 09:35:50 -0400 > > "Kazlauskas, Nicholas" <nicholas.kazlauskas@xxxxxxx> wrote: > > > >> The patches I've put out target this use case mostly because of the > >> benefit for a relatively simple interface. VRR can and has been used in > >> more ways that this, however. > >> > >> An example usecase that differs from this would actually be video > >> playback. The monitor's refresh rate likely doesn't align with the video > >> content rate. An API that exposes direct control over VRR (like the > >> range, refresh duration, presentation timestamp) could allow the > >> application to specify the content rate directly to deliver a smoother > >> playback experience. For example, if you had a 24fps video and the VRR > >> range was 40-60Hz you could target 48Hz via some API here. > > The way that has been discussed to be implemented is that DRM page flips > > would carry a target timestamp, which the driver will then meet as good > > as it can. It is better to define an absolute target timestamp than a > > frequency, because a timestamp can be used to synchronize with audio > > and more. Mario Kleiner can tell you all about scientific use cases > > that require accurate display timing, not just frequency. > > To summarize what information should be provided by the driver stack to > make applications happy: > > 1. The minimum time a frame can be displayed, in other words the maximum > frame rate. > 2. The maximum time a frame can be displayed, in other words the minimum > frame rate. > 3. How much change of frame timing is allowed between frames to avoid > luminescence flickering. > > Number 1 and 2 can also be used to signal the availability of VRR to > applications, e.g. if they are identical we don't support VRR at all. Hi Christian, "the maximum time a frame can be displayed" is perhaps not an unambiguous definition. A frame can be shown indefinitely in any case. The CRTC will simply start scanning out the same frame again if there is no new one. I understand what you want to say, but perhaps some different words will be in order. I do wonder if applications really want to know the maximum acceptable slew rate in timings... maybe that should be left for the drivers to apply. What I'm thinking is that we have the page flip timestamp with the page flip events to tell when the new FB became active. That information could be extended with a time range on when the very next flip could take place. Applications are already computing that prediction from the flip timestamp and fixed refresh rate, but it might be nice to give them the driver's opinion explicitly. Maybe the tolerable slew rate is not a constant. Other than that, yes, it sounds fine to me. Thanks, pq
Attachment:
pgpX8p2iWh4xR.pgp
Description: OpenPGP digital signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
