On Mon, Oct 08, 2018 at 01:52:13PM -0300, Rodrigo Siqueira wrote: > On 10/08, Chris Wilson wrote: > > Quoting Rodrigo Siqueira (2018-10-08 15:52:20) > > > For historical reason, the function drm_wait_vblank_ioctl always return > > > -EINVAL if something gets wrong. This scenario limits the flexibility > > > for the userspace make detailed verification of the problem and take > > > some action. In particular, the validation of “if (!dev->irq_enabled)” > > > in the drm_wait_vblank_ioctl is responsible for checking if the driver > > > support vblank or not. If the driver does not support VBlank, the > > > function drm_wait_vblank_ioctl returns EINVAL which does not represent > > > the real issue; this patch changes this behavior by return ENOTTY > > > (Inappropriate ioctl for device). Additionally, some operations are > > > unsupported by this function, and returns EINVAL; this patch changes the > > > return value to EOPNOTSUPP (Operation not supported). Lastly, the > > > function drm_wait_vblank_ioctl is invoked by libdrm, which is used by > > > many compositors; because of this, it is important to check if this > > > change breaks any compositor. In this sense, the following projects were > > > examined: > > > > > > * Drm-hwcomposer > > > * Kwin > > > * Sway > > > * Wlroots > > > * Wayland-core > > > * Weston > > > * Xorg (67 different drivers) > > > > > > For each repository the verification happened in three steps: > > > > > > * Update the main branch > > > * Look for any occurrence "drmWaitVBlank" with the command: > > > git grep -n "drmWaitVBlank" > > > * Look in the git history of the project with the command: > > > git log -SdrmWaitVBlank > > > > > > Finally, none of the above projects validate the use of EINVAL which > > > make safe, at least for these projects, to change the return values. > > > > > > Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx> > > > --- > > > drivers/gpu/drm/drm_vblank.c | 6 +++--- > > > 1 file changed, 3 insertions(+), 3 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c > > > index 98e091175921..88ec6fb49afb 100644 > > > --- a/drivers/gpu/drm/drm_vblank.c > > > +++ b/drivers/gpu/drm/drm_vblank.c > > > @@ -1533,10 +1533,10 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data, > > > unsigned int flags, pipe, high_pipe; > > > > > > if (!dev->irq_enabled) > > > - return -EINVAL; > > > + return -ENOTTY; > > > > Arguable. > > Hi Chris, thanks for your review :) > > Originally, I noticed that DRM does not provide a mechanism for checking > if VBlank is supported or not by the driver. IMHO return ENOTTY can be > useful for virtual drivers and some specific devices; the userspace can > take this information and infer some information about the device, > consequently, handling different scenarios. This issue was raised when I > was working to implement the virtual mode in the VKMS (no vblank) and > tried to patch IGT to handle modules that do not support Vblank. > Finally, I believe that ENOTTY precisely describes the condition > "if (!dev->irq_enabled)". Make sense? I Chris' recent series to do the same for all kms ioctls we've generally agreed on EOPNOTSUPP as the errno for "this feature isn't supported on this driver". And ENOTTY for the "I have no idea what this ioctl even is" kind of stuff. So I'm leaning towards EOPNOTSUPP here. > > > > > > > if (vblwait->request.type & _DRM_VBLANK_SIGNAL) > > > - return -EINVAL; > > > > User error -> einval. > > Here, my primary motivation to add EOPNOTSUPP came from the comment in > _DRM_VBLANK_SIGNAL, which says: > > _DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking, unsupported */ > > Then I thought that EOPNOTSUPP could better describe this situation. I think either is an ok choice. EINVAL since afaik upstream never supported this flag, so it's not different from any other flag with on meaning - just another userspace programming bug. > > > + return -EOPNOTSUPP; > > > > > > if (vblwait->request.type & > > > ~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK | > > > @@ -1545,7 +1545,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data, > > > vblwait->request.type, > > > (_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK | > > > _DRM_VBLANK_HIGH_CRTC_MASK)); > > > - return -EINVAL; > > > + return -EOPNOTSUPP; > > > > User error -> einval. > > About this one, you are right. Sorry, I misunderstood that part of the > code. Agreed, EINVAL. Cheers, Daniel -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
